Abstract:Reactivity-controlled compression ignition (RCCI) combustion is considered one of the most promising low-temperature combustion (LTC) concepts aimed at reducing greenhouse gases for the transportation and power generation sectors. RCCI combustion mode is achieved by combining different fuel types with low and high temperatures. The aim of this study is to investigate combustion characteristics and reduce nitrogen oxide (NOx) and carbon dioxide (CO2) emissions. In this experimental study, the effects of the RCCI strategy using methanol/diesel fuel on combustion characteristics (ignition delay, combustion duration), engine performance (brake-specific fuel consumption and brake-specific energy consumption), and emissions were examined in a four-cylinder, turbocharged, dual-fuel engine. The experiments were conducted at a constant speed of 1750 rpm at partial loads (40 Nm, 60 Nm, 80 Nm, and 100 Nm). The test results obtained with diesel fuel were compared with the test results obtained with methanol at different mass flow rates. When the results were examined, the minimum ignition delay (ID) occurred at 40 Nm torque, 5.63 crank angle (CA) with M12 fuel, while the maximum ID occurred with M26 fuel at 80 Nm torque, showing an increasing trend as engine load (EL) increased. The highest combustion time (CD) was achieved with M26 fuel at 100 Nm torque, whereas the lowest was achieved with the same fuel (M26) at 40 Nm. While the minimum brake-specific fuel consumption (bsfc) was 45.9 g/kWh for conventional diesel fuel at 40 Nm, the highest bsfc was 104.88 g/kWh for 100 Nm with M26 fuel. Generally, bsfc tends to increase with increasing load. Brake-specific energy consumption (bsec) had the lowest value of 1950.58 kJ/kWh with conventional diesel fuel at 40 Nm and the highest value of 4034.69 kJ/kWh with M26 fuel at 100 Nm. As the methanol content increased, significant improvements were observed in (NOx) and (CO2) emissions, while hydrocarbon (HC) and oxygen (O2) emissions increased as well. Smoke emissions decreased at low loads but tended to increase at high loads.

Experimental study on the cyclic variations of ethanol/diesel reactivity controlled compression ignition (RCCI) combustion in a heavy-duty diesel engine

Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine

A Parametric Study for Enabling Reactivity Controlled Compression Ignition (RCCI) Operation in Diesel Engines at Various Engine Loads

Experimental Study on the Influence of Low-Temperature Combustion (LTC) Mode and Fuel Properties on Cyclic Variations in a Compression-Ignition Engine

Experimental and Numerical Investigations on the Cyclic Variability of an Ethanol/diesel Dual-Fuel Engine

Experimental Study on Combustion Characteristics of a Fischer‐tropsch Diesel/methanol Reactivity Controlled Compression Ignition Mode Engine

Numerical Study on Double Injection Techniques in a Gasoline and Biodiesel Fueled RCCI (reactivity Controlled Compression Ignition) Engine

Experimental studies on combustion and emissions of RCCI (reactivity controlled compression ignition) with gasoline/n-heptane and ethanol/n-heptane as fuels

A Comparative Study on the Performance of Partially Premixed Combustion (PPC), Reactivity-Controlled Compression Ignition (RCCI), and RCCI with Reverse Reactivity Stratification (R-RCCI) Fueled with Gasoline and Polyoxymethylene Dimethyl Ethers (Poden)

Study on Cycle-by-cycle Variations in a Diesel Engine with Dimethyl Ether As Port Premixing Fuel

Numerical simulation of cyclic variability in reactivity-controlled compression ignition combustion with a focus on the initial temperature at intake valve closing

Experimental study on the high load extension of PODE/methanol RCCI combustion mode with optimized injection strategy

Experimental studies on combustion and emissions of RCCI fueled with n-heptane/alcohols fuels

Experimental investigation on n-butanol/methyl oleate dual fuel RCCI combustion in a single cylinder engine at high-load condition

Effects of direct injection timing and premixed ratio on combustion and emissions characteristics of RCCI (Reactivity Controlled Compression Ignition) with N-heptane/gasoline-like fuels

The Experimental Investigation of the Effects on the Combustion, Performance, and Emission Characteristics of an RCCI Engine Using Methanol/Diesel Fuel

Combustion Cycle-by-Cycle Variations in a Common Rail Direct Injection Engine Fueled with Dimethyl Carbonate–Diesel Blend

Parametric study and optimization of a RCCI (reactivity controlled compression ignition) engine fueled with methanol and diesel

Numerical Investigation on the Effect of Reactivity Gradient in an RCCI Engine Fueled with Gasoline and Diesel

Experimental assessment on performance and combustion behaviors of reactivity-controlled compression ignition engine operated by n-pentanol and cottonseed biodiesel

Towards A Comprehensive Understanding of the Influence of Fuel Properties on the Combustion Characteristics of A Rcci (reactivity Controlled Compression Ignition) Engine