Abstract:The simultaneous reduction of fuel consumption and pollutant emissions such as Nitrogen oxides (NO x ) and soot remains the primary goal of modern engine development. In this context, Low Temperature Combustion (LTC) concepts are considered promising approaches. The so-called Reactivity Controlled Compression Ignition (RCCI) combustion process is one of these LTC concepts. RCCI combustion with two differently reactive fuels enables highly efficient combustion while reducing NO x and soot raw emissions compared to conventional combustion processes. RCCI combustion is significantly affected by the thermodynamical conditions in the combustion chamber (i.e., pressure and temperature), by the injection parameters (i.e., injection duration, timing, and offset), and by the reactivity of the fuels. It is very important to understand how these parameters affect the mixture formation in RCCI combustion and consequently the engine efficiency and emissions. This paper therefore focuses on the analysis of RCCI mixture formation and combustion. To this end, optical fuel injection investigations were performed in a High Pressure Chamber (HPC) under steady-state conditions to gain in-depth insights into the fuel spray propagation and mixture formation of the differently reactive fuels. Ethanol (low reactivity fuel) and diesel (high reactivity fuel) were used in the study. The results from the optical investigations showed that RCCI combustion is very sensitive to the chamber temperature and that a small increase in temperature change leads to a significant reduction in the Ignition Delay (ID) and results in early combustion. The reactivity gradients and concentrations are governed by the injection timing and duration of the low and high reactivity fuels, and also the offset between them. It was found that with increased chamber pressure, the Liquid Penetration Length (LPL) and the ID decrease. However, there is no impact on the Gaseous Penetration Length (GPL). The results from the optical HPC investigations were used to calibrate the spray model for the numerical simulations of RCCI combustion. The calibrated spray models agree well with the experimental data regarding LPL and GPL for ethanol and diesel fuel, indicating that they are well calibrated.

Experimental study on reduction of pollutant emissions in reactivity controlled compression ignition (RCCI) engine fueled with diesel/gasoline fuels

Investigations on reactivity controlled compression ignition combustion with different injection strategies using alternative fuels produced from waste resources

A Parametric Study for Enabling Reactivity Controlled Compression Ignition (RCCI) Operation in Diesel Engines at Various Engine Loads

The Experimental Investigation of the Effects on the Combustion, Performance, and Emission Characteristics of an RCCI Engine Using Methanol/Diesel Fuel

Potential for Reducing Emissions in Reactivity-Controlled Compression Ignition Engines by Fueling Syngas and Diesel

Effect of Fuel Injection Pressure and Premixed Ratio on Mineral Diesel-Methanol Fueled Reactivity Controlled Compression Ignition Mode Combustion Engine

Numerical Investigation on the Effect of Reactivity Gradient in an RCCI Engine Fueled with Gasoline and Diesel

Effect of Compression Ratio and Piston Geometry on RCCI Load Limits and Efficiency

A Comprehensive Study of Fuel Reactivity on Reactivity Controlled Compression Ignition Engine: Based on Gasoline and Diesel Surrogates

Predicting the effects of direct-injected fuels co-powered by high-CO2 biogas on RCCI engine emissions using kinetic mechanisms and multi-objective optimization

Experimental investigation on n-butanol/methyl oleate dual fuel RCCI combustion in a single cylinder engine at high-load condition

Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine

Experimental Study on Combustion Characteristics of a Fischer‐tropsch Diesel/methanol Reactivity Controlled Compression Ignition Mode Engine

An Investigation into the Rcci Engine Operation under Low Load and Its Achievable Operational Range at Different Engine Speeds

Hydrogen/diesel RCCI engine performance assessment at low load

Statistical analysis on the effect of premixed ratio, EGR, and diesel fuel injection parameters on the performance and emissions of a NG/Diesel RCCI engine using a DOE method

Effect of split injection strategy of diesel fuel on multi-stage heat release and performance of a RCCI engine fueled with diesel and natural gas

Particulate Matter Emission Characteristics of a Reactivity Controlled Compression Ignition Engine Fueled with Biogas/diesel Dual Fuel

Enhancing reactivity-controlled compression ignition engine performance: A response surface methodology approach with ammonium hydroxide-waste cooking oil biodiesel optimization

Advancing RCCI engine performance via optimal acetylene premix ratios and advanced diesel injection timing: An experimental investigation

Optical spray investigation and numerical spray model calibration for the RCCI combustion mode with ethanol/CNG and diesel fuel