Abstract:Air-source heat pumps (ASHPs) operating in cold climates experience problems with frosting and high refrigerant temperatures. These problems increase energy consumption, and their severity depends on the climatic conditions. In the present paper, a methodology for identifying the prevailing problem between frosting and high discharge temperatures is presented. Three performance indices, the frosting index (FI), the discharge index (DI), and the total loss index (TLI), are proposed to quantify the impacts of frosting and high discharge temperatures on the annual performance of ASHPs in different climatic conditions. The FI and DI show which problem (frosting or high discharge temperature) dominates, and the TLI indicates the combined effect of frosting and high discharge temperatures on the performance of an ASHP. A thermodynamic model of an ASHP coupled with the TRNSYS building simulation tool is used to estimate the performance of an ASHP and the proposed loss indices to estimate the impact of both frosting and high discharge temperatures for 45 cities in Canada. The results can be extended to other parts of the world that experience similar climatic conditions The results reveal that in cities in ASHRAE climatic zones 5 and 6 (classified as cold regions) where the ambient air temperatures are predominantly between −15 °C to 6 °C, ASHPs are heavily impacted by frosting. The problem of high discharge temperatures in ASHPs is predominant in cities in climate zones 7 and 8 (classified as very cold and subarctic regions) where the temperatures are frequently below −20 °C in winter. Among the cities considered, St. John, NL has the highest fraction of heating hours experiencing frosting (90 %), where the annual increase in energy consumption due to frosting is 13.5 % of the annual heating energy consumption. The highest annual increase in energy consumption due to high discharge temperatures is in Isachsen, NU (zone 8), where the increase is 30 % of the annual heating energy consumption Based on the proposed indices, another index called the performance gain index (PGI) is created, which can be used as a first step to assess the energy-saving potential of design modifications applied to ASHPs to solve the problems of frosting and high discharge temperatures. The PGI will aid in developing climate specific ASHPs. One possible design modification is the use of a two-stage ASHP with an economizer. It is observed that the two-stage ASHP with economizer can mitigate high discharge temperatures and improve performance in very cold and subarctic regions (zones 7 and 8). However, it is not as beneficial in zones 5 and 6, where the impact of high discharge temperatures on performance is minimal and frosting dominates. Finally, a case study, using the PGI to evaluate the economic and environmental effectiveness of a two-stage ASHP with economizer is presented for the city of Saskatoon.

TRNSYS modelling and feasibility study of natural gas absorption heat pump (GAHP) for Canadian homes

Simulation Study on Performance of an Air Source Heat Pump System Combined with Phase Change Thermal Storage Using Alternative Refrigerants

Organic Rankine Cycle-Ground Source Heat Pump with Seasonal Energy Storage Based Micro-Cogeneration System in Cold Climates: The Case for Canada

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Sustainability, climate resiliency, and mitigation capacity of geothermal heat pump systems in cold regions

Modelling and Performance Analysis of Power System in Gas Engine-Driven Heat Pump

Techno-economic analysis of air-source heat pump (ASHP) technology for single-detached home heating applications in Canada

Recent Development and Application of Geothermal Heat Pump Systems in Cold-Climate Regions of the US: A Further Investigation

Modeling and experiments for a CO2 ground-source heat pump with subcritical and transcritical operation

Investigation on the Feasibility and Performance of Transcritical CO2 Heat Pump Integrated with Thermal Energy Storage for Space Heating

Simulation of natural gas engine-driven heat pump (GHP) in cooling conditions

Methodology to evaluate design modifications intended to eliminate frosting and high discharge temperatures in air-source heat pumps (ASHPs) in cold climates

Transient Simulation Of R744hybrid Ground Coupled Heat Pump With Modelica

Modelling and Performance Analysis Based on the Core Components of the Gas Engine-Driven Heat Pump System

Experimental analysis of a novel gas-engine-driven heat pump (GEHP) system for combined cooling and hot-water supply

Numerical study of geothermal district heating from a ground heat exchanger coupled with a heat pump system

In Situ Performance Analysis of Hybrid Fuel Heating System in a Net-Zero Ready House

Artificial neural networks for predicting the performance of heat pumps with horizontal ground heat exchangers

Progress in Ground-source Heat Pumps Using Natural Refrigerants

PERFORMANCE STUDY OF ABSORPTION/COMPRESSION HEAT PUMP (ACHP) SYSTEM BY LOW-TEMPERATUREGEOTHERMAL TAIL WATER

Performance of Ground Source Absorption Heat Pump