Abstract:In ITER, pellets are calculated to require more than 8 times the mass than currently planned to reliably trigger ELMs. Unmitigated heat flux impulses from edge-localized modes (ELMs) are intolerable in ITER at full power and current. Therefore, ITER operation relies on multiple approaches to control ELM heat fluxes. One method is pellet ELM pacing to instigate small rapid ELMs with low heat flux. Predicting the performance of pellet pacing is critical for ITER, which is expected to operate in a regime with a low-collisionality, peeling-limited pedestal. However, to trigger ELMs the local pressure increase in the expanding pellet cloud pushes the equilibrium over the ballooning stability limit. In this work, linear and nonlinear M3D-C1 simulations are used to predict pellet mass thresholds in DIII-D discharges and ITER scenarios with peeling-limited pedestals. It is found that the distance of the equilibrium's operational point from the ballooning branch of the pedestal stability boundary strongly changes thresholds. Linear M3D-C1 simulations find a strong dependence of the pellet mass threshold on the poloidal injection location for ITER's 15 MA, Q=10 scenario. The required pellet mass at the planned injection locations is 8 to 17 times larger than currently considered. However, such linear simulations do not include pellet ablation physics or time evolution of density and temperature. A new scheme of 2D nonlinear simulations, coupled with linear stability analysis at various steps throughout the nonlinear time evolution, was developed to include such physics and improve on the linear results. These new nonlinear-to-linear simulations confirm previous findings. This result suggests that pellet ELM triggering in ITER could require pellets much larger than those currently planned, which makes ELM-pacing operationally challenging. On the other hand, fueling pellets injected from the high-field side will likely not unintentionally trigger ELMs in an otherwise ELM-stable plasma.

Effects of flow collisionality on ELM replication in plasma guns

Overview of the Recent Study on ELM Mitigation Physics with Different External Actuators on HL-2A Tokamak

Plasma Shaping Effects on the Collisionless Residual Zonal Flow Level

Exploring the effect of ELM and code-coupling frequencies on plasma and material modeling of dynamic recycling in divertors

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

Investigation of cascade-type falling liquid-film along first wall of laser-fusion reactor

Effects Of Laser And Plasma Parameters On Shock Wave Generation And Acceleration Of Protons

Impact of flow-induced beam deflection on beam propagation in ignition scale hohlraums

Effect of detachment on Magnum-PSI ELM-like pulses: Direct observations and qualitative results

Modeling transient edge plasma transport with dynamic recycling

High-velocity dust impacts in plasma facing materials: Insights from Molecular Dynamics Simulations

Interaction of ELMs and fast particles with in-vessel components in ASDEX Upgrade

Type-I Elm Power Loads On The Closed Outer Divertor Targets In The Hl-2a Tokamak

Impact of repetitive ELM transients on ITER divertor tungsten monoblock top surfaces

Critical Exploration of Liquid Metal Plasma-Facing Components in a Fusion Nuclear Science Facility

Effects of Preplasma Scale Length and Critical Surface Dynamics on Laser Energy Coupling to Hot Electrons

Effect of detachment on Magnum-PSI ELM-like pulses: I. Direct observations and qualitative results

Prediction of pellet mass thresholds for ELM triggering in low-collisionality, ITER-like discharges

Study of Different Models of the Wall Ablation Process in Capillary Discharge

Turbulence and Zonal Flows in Edge Plasmas of the HL-2A Tokamak