Abstract:This paper provides a theoretical investigation of negative refraction and focusing of elastic guided waves in a free-standing plate with a step-like thickness change. Under certain conditions, a positive phase velocity (forward) Lamb mode can be converted into a negative phase velocity (backward) mode at such interface, giving rise to negative refraction. A semi-analytical model is developed in order to study the influence of various parameters such as the material Poisson's coefficient, the step-like thickness, the frequency and the incidence angle. To this end, all the Lamb and shear horizontal propagating modes, but also a large number of their inhomogeneous and evanescent counterpart,s are taken into account. The boundary conditions applied to the stress-displacement fields at the thickness step yields an equation system. Its inversion provides the transmission and reflection coefficients between each mode at the interface. The step-like thickness and Poisson's ratio are shown to be key parameters to optimize the negative refraction process. In terms of material, Duralumin is found to be optimal as it leads to a nearly perfect conversion between forward and backward modes over broad frequency and angular ranges. An excellent focusing ability is thus predicted for a flat lens made of two symmetric thickness steps. Theoretical results are confirmed by a numerical FDTD simulation and experimental measurements made on an optimized Duralumin flat lens by means of laser interferometry. This theoretical study paves the way towards the optimization of elastic devices based on negative refraction, in particular for cloaking or super-focusing purposes.

On metallic gratings coated conformally with isotropic negative-phase-velocity materials

Allelomimesis as universal clustering mechanism for complex adaptive systems

Fabrication of Negative Index Materials Using Dielectric and Metallic Composite Route

Negative Refractive Index of Metallic Cross-I-shaped Pairs: Origin and Evolution with Pair Gap Width.

A new mechanism for negative refraction and focusing using selective diffraction from surface corrugation

The strange case of Negative Reflection

Effective Negative Refraction Index in Periodic Metal–ferrite–metal Film Composite

On the Possibility of Reflectionless Coating of A Homogeneous Bianisotropic Layer on A Perfect Conductor

Multilayer-coated Diffraction Gratings: Differential Method of Chandezon Et Al Revisited

Convergence Of The Coupled-Wave Method For Metallic Lamellar Diffraction Gratings

PLRC-FDTD Analysis on Electromagnetic Wave Reflection Coefficients of Conductive Plate Coated with Negative Index of Refraction Materials

Negative Refraction in Multilayered Metal-Dielectric Metamaterials with Ellipse-Like Isofrequence Surfaces

All-dielectric High-Efficiency Reflection Gratings Made with Multilayer Thin-Film Coatings

Internal Mechanism of Perfect-Reflector-backed Dielectric Gratings to Achieve High Diffraction Efficiency

Negative Refraction And Sub-Wavelength Imaging Through Surface Waves On Structured Perfect Conductor Surfaces

Negative refraction of Lamb modes: A theoretical study

A Planar Waveguide Concave Grating Employing Dielectric Mirrors

Surface Waves Excited from Negative-Index Materials

Large bandwidth, highly efficient optical gratings through high index materials

Study on surface waves in a medium plate made from negative index materials

Waveguide Echelle Grating with Low Polarization-Dependent Loss Using Single-Side Metal-Coated Grooves