Abstract:A highly sensitive (S = 108.52 kPa−1 for 0–5 kPa range) soft capacitive sensor worn like a Band‐Aid is developed such that continuous blood pressure monitoring is sustainably achieved after an initial, single point calibration obtained from the arm‐cuff. The sensor leverages iontronic material with air‐gaps for the dielectric combined with highly wrinkled, stretchable electrodes. Continuous beat‐to‐beat blood pressure (BP) monitoring provides hemodynamic information such as BP changes and waveforms over time, providing abundant information to more accurately diagnose a person's cardiovascular health compared to static cuff‐based measurements. To overcome the shortcomings of current techniques, a highly sensitive (S = 108.52 kPa−1 for 0–5 kPa range) soft capacitive sensor that can be worn like a Band‐Aid is developed such that continuous beat‐to‐beat BP monitoring can be sustainably achieved after an initial calibration. The sensor leverages iontronic material with air gaps for the dielectric combined with highly wrinkled, stretchable electrodes; the resulting average sensitivity of this device is demonstrated to be higher than that of other comparable sensors in literature. For the hemodynamic capture, the operating frequency of 300 kHz is chosen to achieve higher temporal resolution in continuous BP monitoring. Further, the multi‐island design in this work allows for rapid placement of the sensor without needing to accurately align with the underlying artery. Because of the improved sensitivity, the sensors can be adhered to the pulse points without an applanator. Finally, this sensor demonstrates sustained beat‐to‐beat blood pressure recordings that show excellent systolic, diastolic, and mean arterial pressure correlation with an FDA‐cleared device, the Caretaker.

A CMOS-Based Tactile Sensor for Continuous Blood Pressure Monitoring

A Novel Implantable Saw Sensor for Blood Pressure Monitoring

Crosstalk-free Hybrid Integrated Multimodal Sensor for Human Temperature, Humidity, and Pressure Monitoring

Studies of a high-sensitive surface acoustic wave sensor for passive wireless blood pressure measurement

Soft Iontronic Capacitive Sensor for Beat‐to‐Beat Blood Pressure Measurements

Implantable multi sensor system for in vivo monitoring of cardiovascular parameters

An Alignment-Free Sensing Module for Noninvasive Radial Artery Blood Pressure Measurement

Multimodal Pressure Sensor: Advancing Continuous Cardiovascular Monitoring through Synergistic Capacitive and Piezoresistive Sensing

Thin, soft, wearable system for continuous wireless monitoring of artery blood pressure

Integration of Capacitive Pressure Sensor-on-Chip with Lead-Free Perovskite Solar Cells for Continuous Health Monitoring

Artificial tactile system for pressure monitoring in extracorporeal circulation processes

Wearable Skin-Like Optoelectronic Systems with Suppression of Motion Artifacts for Cuff-Less Continuous Blood Pressure Monitor

Design and Simulation of Implantable Blood Pressure Sensor Using COMSOL Multiphysics

A Paper-Based Flexible Tactile Sensor Array for Low-Cost Wearable Human Health Monitoring

Flexible Capacitive Pressure Sensor Based on Interdigital Electrodes with Porous Microneedle Arrays for Physiological Signal Monitoring

CMOS Chip for Solid-State Tactile Force Sensor

Biodegradable and flexible arterial-pulse sensor for the wireless monitoring of blood flow

Wearable Capacitive Pressure Sensor for Contact and Non-Contact Sensing and Pulse Waveform Monitoring

Alignment-Free Liquid-Capsule Pressure Sensor For Cardiovascular Monitoring

A Wireless Artificial Mechanoreceptor in 180-nm CMOS

Fabric‐Based Ultrasonic Sensor with Integrated Piezoelectric Composite for Blood Pressure Monitoring