Abstract:We have demonstrated an anisotropic bulk SmFe12-based sintered magnet with sufficiently large coercivity of μ0Hc=1.0 T and a remanence ratio (Mr/Ms) of 0.84 using conventional liquid sintering process of nitrogen jet-milled powders with the nominal composition of Sm8Fe73.5Ti8V8Ga0.5Al2 (at.%). The moderate saturation magnetization of μ0Ms =0.74 T is due to the dissolution of a large amount of stabilizing elements, Ti, V, and Al, in the 1:12 phase. The anisotropy field of the main 1:12 phase was determined to be µ0HA=10.2 T. Detailed multi-scale microstructure characterizations by scanning electron microscope (SEM) and scanning transmission electron microscope (STEM) showed the magnet consists of Sm(Fe,Ti,V,Al)12 grains with the ThMn12-type crystal structure with a size distribution of ∼3−15µm that are enveloped by ∼3 nm thick Sm-rich amorphous intergranular phase. Secondary phases including metallic (Sm,Ga)-rich, SmOx, and Fe2(Ti,V) phases coexist with the 1:12 phase. Measured angular dependence of coercivity follows Kondorsky type magnetization reversal, suggesting the coercivity arises due to the pining of magnetic domain walls. Magneto-optical Kerr effect (MOKE) microscopy revealed magnetization reversal starts at the grain boundaries and interphase interfaces and thin amorphous intergranular phases act as the pinning sites against magnetic domain wall propagation. Small micromagnetic parameter α∼0.164 estimated by fitting to the Kronmüllar equation suggest that the reduction of the grain size and engineering of the intergranular phase to an Fe-lean composition are necessary to improve the coercivity toward µ0HA/3=3.4 T. This work provides guidelines on an optimum microstructure to develop an anisotropic bulk SmFe12-based sintered magnet with a sufficiently large coercivity.

Effect of temperature-dependent shape anisotropy on coercivity with aligned Stoner-Wohlfarth soft ferromagnets

Magnetism And The Effect Of Anisotropy With A One-Dimensional Monatomic Chain Of Cobalt Using A Monte Carlo Simulation

Finite-temperature Coercivity of Multilayers of Hard and Soft Magnets

Upper Critical Fields and Anisotropy of BaFe 1.9 Ni 0.1 As 2 Single Crystals

Scaling Relation Between Anomalous Nernst and Hall Effect in [pt/co](n) Multilayers

Micromagnetic Studies of Time-Dependent Coercivity

The Exchange Bias and Coercivity of FM/AFM Films: Monte Carlo Simulation

Temperature stability of coercivity in mischmetal-Fe-Co-B melt-spun ribbons

Temperature and set field dependence of exchange bias training effects in Co/NiO/[Co/Pt] heterostructures with orthogonal easy axes

The Effect of Interfacial Coupling in Co/CoO Exchange-Bias Bilayers with Special Field Cooling

Influence of classical anisotropy fields on the properties of Heisenberg antiferromagnets within unified molecular field theory

The Influence of Interface Anisotropy on Demagnetization Progress and Magnetic Properties in Parallelly Oriented Hard/soft Exchange-Coupled Multilayers

Magnetization Reversal and Anisotropy with Chains of Superparamagnetic Ni Nanoparticles.

Effect of a Weak Transverse Magnetic Field on the Morphology and Orientation of Directionally Solidified Al–Ni Alloys

Field-sensitivity and reversibility of the inverse magnetocaloric effect at martensitic transformations

Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnet

Annealing Effects and Short-Range Ordering in the Non-Magnetostrictive Amorphous Alloy Co58NiloFesSillBx6

Temperature dependence of magnetic anisotropy and domain wall tuning in BaTiO3(111)/CoFeB multiferroics

Giant coercivity, resistivity upturn, and anomalous Hall effect in ferrimagnetic FeTb

Angular and temperature dependence of current induced spin-orbit effective fields in Ta/CoFeB/MgO nanowires

Annealing Effects and Short-Range Ordering in the Non-Magnetostrictive Amorphous Alloy Co 58 Ni 10 Fe 5 Si 11 B 16