Critical confinement and elastic instability in thin solid films

Animangsu Ghatak,Manoj K. Chaudhury

DOI: https://doi.org/10.48550/arXiv.cond-mat/0701252

2007-04-30

Abstract:When a flexible plate is peeled off a thin and soft elastic film bonded to a rigid support, uniformly spaced fingering patterns develop along their line of contact. While, the wavelength of these patterns depends only on the thickness of the film, their amplitude varies with all material and geometric properties of the film and that of the adhering plate. Here we have analyzed this instability by the regular perturbation technique to obtain the excess deformations of the film over and above the base quantities. Furthermore, by calculating the excess energy of the system we have shown that these excess deformations, associated with the instability, occur for films which are critically confined. We have presented two different experiments for controlling the degree of confinement: by pre-stretching the film and by adjusting the contact width between the film and the plate.

Soft Condensed Matter,Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is about the elastic instability that occurs when a thin elastic film is peeled off from a rigid substrate and the fingering patterns formed thereby. Specifically, the authors focus on the evenly - spaced fingering patterns formed on the contact line when a flexible plate is peeled off from a thin and soft elastic film. The wavelength of these patterns depends only on the thickness of the film, while their amplitude is affected by all the material and geometric properties of the film and the adhering plate.

### Main problem decomposition:

1. **Phenomenon description**:
- When a flexible plate is peeled off from a thin and soft elastic film adhered to a rigid support, evenly - spaced fingering patterns will be formed on their contact line.
- The wavelength of these patterns depends only on the film thickness \( h \), while the amplitude depends on all the material and geometric properties of the film and the adhering plate.

2. **Key questions**:
- Why do these patterns form?
- How can the formation mechanism of these patterns be theoretically analyzed and experimentally verified?
- Under what conditions will the film experience this elastic instability?

3. **Research methods**:
- Use the regular perturbation technique to analyze the additional deformation of the instability.
- By calculating the additional energy of the system, prove that these additional deformations are related to the film under critical limiting conditions.
- Propose two different experimental schemes to control the degree of constraint: pre - stretching the film and adjusting the contact width between the film and the plate.

4. **Core conclusions**:
- When the film is sufficiently constrained (i.e., the constraint parameter \( \epsilon < 0.35 \)), in order to adapt to local lateral contraction, the contact line will become wavy, thus producing evenly - spaced fingers and cavities.
- The experimental results show that by adjusting the contact width or pre - stretching the film, the degree of constraint of the film can be systematically controlled.

### Mathematical formula representation:

- The constraint parameter is defined as:
\[
\epsilon=\frac{h}{q}
\]
where \( q = \left(\frac{\mu D^6}{h}\right)^{\frac{1}{3}} \), \( \mu \) is the shear modulus, \( D \) is the bending stiffness of the plate, and \( h \) is the thickness of the film.

- The relationship between the wavelength \( \lambda \) and the film thickness \( h \):
\[
\lambda\propto h
\]

- The relationship between the amplitude \( A \) and the constraint parameter \( \epsilon \):
\[
\xi=\frac{A}{q}\propto\frac{1}{\frac{h}{c}}
\]

Through these analyses and experiments, the authors have revealed the elastic instability that occurs during the peeling process of thin elastic films and proposed feasible methods to control this instability.