Abstract:The number of Internet of Things (IoT) deployments is expected to reach 75.4 billion by 2025. Roughly 70% of all IoT devices employ weak or no encryption; thus, putting them and their connected infrastructure at risk of attack by devices that are wrongly authenticated or not authenticated at all. A physical layer security approach -- known as Specific Emitter Identification (SEI) -- has been proposed and is being pursued as a viable IoT security mechanism. SEI is advantageous because it is a passive technique that exploits inherent and distinct features that are unintentionally added to the signal by the IoT Radio Frequency (RF) front-end. SEI's passive exploitation of unintentional signal features removes any need to modify the IoT device, which makes it ideal for existing and future IoT deployments. Despite the amount of SEI research conducted, some challenges must be addressed to make SEI a viable IoT security approach. One challenge is the extraction of SEI features from signals collected under multipath fading conditions. Multipath corrupts the inherent SEI features that are used to discriminate one IoT device from another; thus, degrading authentication performance and increasing the chance of attack. This work presents two semi-supervised Deep Learning (DL) equalization approaches and compares their performance with the current state of the art. The two approaches are the Conditional Generative Adversarial Network (CGAN) and Joint Convolutional Auto-Encoder and Convolutional Neural Network (JCAECNN). Both approaches learn the channel distribution to enable multipath correction while simultaneously preserving the SEI exploited features. CGAN and JCAECNN performance is assessed using a Rayleigh fading channel under degrading SNR, up to thirty-two IoT devices, and two publicly available signal sets. The JCAECNN improves SEI performance by 10% beyond that of the current state of the art.

Multisource Heterogeneous Specific Emitter Identification Using Attention Mechanism-Based RFF Fusion Method

Fast Fourier Transform with Multihead Attention for Specific Emitter Identification

Recurrent Neural Unit with Frequency Attention for Specific Emitter Identification

Few-Shot Specific Emitter Identification via Hybrid Data Augmentation and Deep Metric Learning

Multi-Classifier Fusion for Open-Set Specific Emitter Identification

MRF3Net: Infrared Small Target Detection Using Multi-Receptive Field Perception and Effective Feature Fusion

Specific Emitter Identification of Frequency Hopping Signals Based on Feature Extraction and Deep Residual Network

Iris-Face Fusion and Security Analysis Based on Fisher Discriminant

Squeeze Excitation Densely Connected Residual Convolutional Networks for Specific Emitter Identification Based on Measured Signals

Specific Emitter Identification Algorithm Based on Time–Frequency Sequence Multimodal Feature Fusion Network

Multi-Channel Attentive Feature Fusion for Radio Frequency Fingerprinting

A Specific Emitter Identification System Design for Crossing Signal Modes in the Air Traffic Control Radar Beacon System and Wireless Devices

Research on an Enhanced Multimodal Network for Specific Emitter Identification

Few-Shot Specific Emitter Identification via Deep Metric Ensemble Learning

Specific emitter identification based on multiple sequence feature learning

Few-Shot Specific Emitter Identification Using Asymmetric Masked Auto-Encoder

Enhanced Specific Emitter Identification With Limited Data Through Dual Implicit Regularization

Specific Emitter Identification Based on Software-Defined Radio and Decision Fusion

Specific Emitter Identification Handling Modulation Variation with Margin Disparity Discrepancy

Improving RF-DNA Fingerprinting Performance in an Indoor Multipath Environment Using Semi-Supervised Learning

Specific Emitter Identification Based on Multi-Scale Multi-Dimensional Approximate Entropy