Abstract:Metal organic frameworks (MOFs) have received considerable importance as proton conducting materials in recent times. However, most of the MOFs lack the ability to form film, which limits their application. In the present work, polybenzimidazole (PBI) composite membranes have been prepared by loading post synthetically modified (PSM) UiO-66-NH2 MOFs, denoted as PSM 1 and PSM 2 into an aryl ether-type polybenzimidazole (OPBI) polymer. The pristine OPBI, and MOF nanofiller loaded membranes were doped with phosphoric acid (PA) to prepare proton exchange membranes (PEMs). Use of thermally stable, hydrophilic MOFs resulted in enhanced proton conductivity, higher PA retention capacity, and increased stability against oxidative degradation for the composite membrane than the pristine OPBI polymer. The proton conductivities of the composite membranes (0.29 S cm–1 for PSM 1-10% and 0.308 S cm–1 for PSM 2-10% membranes at 160 °C, under anhydrous environment) were notably higher than the conductivities of the constituents and also higher than most of the MOF based polymer supported membranes. To the best of our knowledge, the PA doped PSM 2 loaded composite membrane shows the highest proton conductivity at 160 °C among all MOF based composite membranes. Extensive interfacial H-bonding plays the most crucial role behind the enhanced proton conductivities of the PA doped MOF containing polymer membranes reported here. This work clearly demonstrates the benefits of using rationally designed PSM 1 and PSM 2 MOFs as nanofiller to prepare OPBI supported membranes that can perform excellent proton conduction in a wide temperature range spanning up to 160 °C. This provides a generalized approach toward achieving an efficient proton conducting membrane for use in fuel cells.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.0c01322.Materials, synthesis of compounds, inherent viscosity, instrumentation and membrane characterization (PXRD, FT-IR, FESEM, TEM, TGA, and mechanical and tensile properties), water uptake, swelling ratio, PA doping levels, proton conductivity measurements (impedance spectroscopy Nyquist plot, and circuit fitting data tables), isothermal proton conductivity and acid leaching study, and literature survey (PDF)This article has not yet been cited by other publications.

Highly Conductive Polybenzimidazole Membranes at Low Phosphoric Acid Uptake with Excellent Fuel Cell Performances by Constructing Long-Range Continuous Proton Transport Channels Using a Metal–Organic Framework (UIO-66)

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Diazoniabicyclo-type Poly (ionic Liquid) Cross-Linked Polybenzimidazole Membrane with Improved Phosphoric Acid Retention for HT-PEMFCs

Enhanced proton conductivity and stability of polybenzimidazole membranes at low phosphoric acid doping levels via constructing efficient proton transport pathways with ionic liquids and carbon nanotubes

Achieving high power density and excellent durability for high temperature proton exchange membrane fuel cells based on crosslinked branched polybenzimidazole and metal-organic frameworks

Constructing proton transport channels in low phosphoric-acid doped polybenzimidazole membrane by introducing metal–organic frameworks containing phosphoric-acid groups

Polybenzimidazole nanocomposite membranes containing imidazole-functionalized UiO-66 nanocrystals with optimal interfacial compatibility for high-temperature proton exchange membrane fuel cells

Nitrogen Rich Covalent Organic Frameworks Composited High Temperature Proton Exchange Membranes with Ultra-Low Volume Expansion and Reduced Phosphoric Acid Leakage

Alkali-free quaternized polybenzimidazole membranes with high phosphoric acid retention ability for high temperature proton exchange membrane fuel cells

Fabricating a MOF Material with Polybenzimidazole into an Efficient Proton Exchange Membrane

Construction of highly conductive PBI-based alloy membranes by incorporating PIMs with optimized molecular weights for high-temperature proton exchange membrane fuel cells

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

High-performance polybenzimidazole composite membranes doped with nitrogen-rich porous nanosheets for high-temperature fuel cells

An effective strategy to enhance dimensional-mechanical stability of phosphoric acid doped polybenzimidazole membranes by introducing in situ grown covalent organic frameworks

Arylether-type polybenzimidazole-based composites containing imidazole-substituted heteropolyacid salts for high-temperature proton exchange membrane fuel cells

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

In situ etching strategy for the preparation of high-temperature proton-exchange membranes with continuous porous proton-transport channels

Achieving high power density of 859.5 mW cm−2: Self-cross-linking polymer membrane based on rigid fluorenone structure