Abstract:In order to study the effect of polycarboxylate superplasticizer (PCE) on the microstructure and strength characteristics of tailings paste, a total of 6 tailings paste combinations including 2 cement-sand ratios (20%, 40%) and 3 water reducer dosages (0, 0.40%, 0.80%) were investigated based on the indoor microstructure test (porosity measurement, XRD test, and SEM observation) and mechanical properties method. The strength of test blocks at different ages was obtained by numerical simulation. The results showed that: 1) The water reducer can effectively reduce the porosity of the tailings paste, and the reduction effect was more significant in the condition of high cement-sand ratios. Meanwhile, high cement-sand ratio is conductive to generate more beneficial hydrates such as portlandite; 2) Compared with the significant effect of cementitious agent on the tensile strength σ t of the paste, the effect of water reducer on σ t is weak. Accordingly, the σ t of the tailings paste is much more sensitive to cementitious agent than water reduce; 3) SEM images show that the better ratio of slurry containing polycarboxylic acid superplasticizer has more C-S-H cementitious content, smaller pore size and shorter molecular chain between particles, indicating that the particles are more encapsulated and the early strength is improved. 4) The incorporation of water reducer enhancement was particularly significant under the condition of triaxial compression. However, the presence of water reducer did not change its deformation characteristics, when the confining pressure is low, the strain softening appears; and when the confining pressure is high, it transforms to strain hardening. The peak strain ε 0 and the confining pressure σ 3 had a linear relationship; 5) The strength of the paste was significantly affected by the confining pressure σ 3 under different conditions. The peak intensity σ 1 and the confining pressure σ 3 satisfied a linear relationship, while the residual strength σ r and the confining pressure σ 3 satisfied a quadratic polynomial fitting relationship. The strength parameters cohesion c and internal friction angle φ were both positively correlated with the water reducer dosage.

Enhanced flocculation and sedimentation of copper tailings by polycarboxylate ether superplasticizer

Enhancing solid-liquid separation performance of copper tailings by regulating settling floc properties

Study on the Effect of Flocculation and Sedimentation on the Mechanical Properties of Iron Tailing Sand

Effect of solution pH and polyethylene oxide concentration on surface/interface properties, flocculation and rheology of concentrated monodisperse ultrafine synthetic tailings slurry

Analysis of the Sedimentation Characteristics of Ultrafine Tailings Based on an Orthogonal Experiment

Effect of Activated Siliceous Wastes Incorporated as Mineral Admixtures on the Rheological Properties of Cement Paste: Insights into Their Physicochemical Interactions in Suspension

Experimental Research on the Microstructure and Strength Characteristics of Tailings Paste Containing Wate Reducer

Enhancing shear strength and handleability of dewatered clay-rich coal tailings for dry-stacking

Sequential usage of charged polyacrylamide for positive feedback in enhancing dewaterability of dredged sediment

Oxalic acid modified copper tailings as an efficient adsorbent with super high capacities for the removal of Pb2+

Effects of a New Synthetic Fe-PAM Flocculants on Filtration and Consolidation of Bentonite Slurry

Study on the Effect of Polycarboxylate Ether Molecular Structure on Slurry Dispersion, Adsorption, and Microstructure

A Highly Expanded Polycarboxylate Gel and New Environmental Response Effects for Efficiently Adsorbing and Recovering Cu(II) from Water

Leaching behavior of copper tailings solidified/stabilized using hydantoin epoxy resin and red clay

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers

Adsorption and dispersion capability of polycarboxylate-based superplasticizers: a review

Improving Flocculation Performance of Copper Flotation Tailings by Conventional and New Technology Polymers

High sedimentation efficiency and enhanced rare earth recovery in the impurity removal process of rare earth leachate by flocculation system

Synthesis and influencing factors of high-performance concrete based on copper tailings for efficient solidification of heavy metals

Micro-assessment of heavy metal immobilization within alkali-activated copper tailings-slag geopolymer

Strength and leaching behavior of tailing-based paste backfill at high water content amended with lime activated ground granulated blast furnace slag and flocculant