Abstract:Resistive Plate Chambers are used in the ATLAS experiment for the muon trigger and two coordinate measurements in the central region. In preparation for the coming years of LHC running at higher luminosity, besides the New Small Wheel project which is expected to complement the ATLAS muon spectrometer in the endcap regions, a smaller size project, known as BIS78, is being developed with a foreseen installation during the LHC Long Shutdown 2. The BIS78 project will reinforce the fake muon rejection and the selectivity of the muon trigger in the transition region between the ATLAS barrel and end-caps by adding 32 RPC triplets on the edges of the Inner Barrel even sectors (BIS7 and BIS8) as this region is characterized by high rate due to secondary charged tracks generated by beam halo protons and a lack of detector instrumentation. Due to the narrow available space, the project foresees to replace the existing Monitored Drift Tubes, used for the precise position measurement in this area, with muon stations formed by integrated smaller diameter tubes and a new generation of RPCs, capable of withstanding the higher rates and provide a robust standalone muon confirmation. These new RPCs are based on novel design of the gas volume with a thinner gas gap and resistive electrodes, a lower operating voltage and new high gain front-end electronics with respect to the legacy RPCs. Besides the use in Run-3 and onwards, this project is also of particular relevance as a pilot test for the HL-LHC upgrade when an additional full layer of new RPC triplets is expected to complement the full barrel region in the innermost plane. The core of the project is presented, together with a description of the production and the test results. Details on the detector infrastructure and services along with a roadmap towards the final installation and commissioning during the Long Shutdown 2 are also discussed.

The upgrade of the CMS muon system for the high luminosity LHC

The upgrade of the CMS muon system for the High Luminosity LHC

CMS detector: Run 3 status and plans for Phase-2

Triple-GEM detectors for the Phase-2 upgrade of the CMS muon spectrometer

The CMS Muon System and Features of Its Operation with HL-LHC

GEM Detectors for the CMS Endcap Muon System: status of three new detector stations

Design validation of the CMS Phase-2 Triple-GEM detectors

Development of the CMS detector for the CERN LHC Run 3

The upgrade of the CMS electromagnetic calorimeter for HL-LHC

Cms Resistive Plate Chamber Overview, from the Present System to the Upgrade Phase I

A GEM Detector System for an Upgrade of the High-eta Muon Endcap Stations GE1/1 + ME1/1 in CMS

The High-Level Trigger for the CMS Phase-2 Upgrade

Architecture of the LHCb muon Frontend control system upgrade

The BIS78 Resistive Plate Chambers upgrade of the ATLAS Muon Spectrometer for the LHC Run-3

Performance of New High-Precision Muon Tracking Detectors for the ATLAS Experiment

Resistive Plate Chambers for 2013-2014 Muon Upgrade in CMS at LHC

Upgrade of the CMS Muon System with Triple-Gem Detectors

The CMS Trigger Upgrade for the HL-LHC

Status of the production of GEM chambers for the CMS experiment at Large Hadron Collider

Status of the CMS Phase I Pixel Detector Upgrade

A new CMS pixel detector for the LHC luminosity upgrade