Abstract:Due to the characteristics of high energy storage efficiency, large energy storage capacity and constant phase change temperature, organic phase change materials have been widely used in the field of thermal energy storage . However, organic phase change materials present a lower thermal conductivity which emerges as a critical limitation to the energy storage efficiency of latent heat thermal energy storage systems. To improve the thermal properties, the superior composite phase change materials of graphene aerogel impregnated paraffin wax were prepared in present study. Hydrothermal reaction method was used to prepare aerogel. Optimal conditions for aerogel preparation were identified as 140 °C/2.5 h/90%/(1:100) (140 °C is the hydrothermal working temperature of the reactor, 2.5 h indicates a treatment time, 90% is the solution occupying the reactor volume and 1:100 is the graphene oxide (GO)/water ratio in the solution). Furthermore, the addition of ethylenediamine and graphene nanoplatelets accelerated the reaction process, which required a hydrothermal treatment time by 50%. For the composite phase change material PW-GO/GNP-3 with a GO/GNP mass fraction of 4.4%, the thermal conductivity was 209.7% of that for the pure PW and the energy storage efficiency was still maintained at 91.60%. Meanwhile, the composite phase change material exhibits a leakage ratio of lower than 3.8%. In addition, based on the prepared composite phase change material samples, the phase change characteristics of phase change material in single cavity and three-cavities have also been examined. The synchronous phase change in three-cavities has been obtained by arranging the phase change material with low melting temperature in the cavity with low temperature, which requires the shortest melting time.

3D reduced graphene oxide aerogel supported TiO2-x for shape-stable phase change composites with high photothermal efficiency and thermal conductivity

Fabrication of Novel Slurry Containing Graphene Oxide-Modified Microencapsulated Phase Change Material for Direct Absorption Solar Collector

Highly thermally conductive phase change composites with excellent solar-thermal conversion efficiency and satisfactory shape stability on the basis of high-quality graphene-based aerogels

Three-Dimensional Macroporous rGO-Aerogel-Based Composite Phase-Change Materials with High Thermal Storage Capacity and Enhanced Thermal Conductivity

Enhanced light-to-thermal conversion performance of self-assembly carbon nanotube/graphene-interconnected phase change materials for thermal-electric device

Paraffin/Ti3C2Tx Mxene@Gelatin Aerogels Composite Phase-Change Materials with High Solar-Thermal Conversion Efficiency and Enhanced Thermal Conductivity for Thermal Energy Storage

Three-Dimensional Interpenetrating Network Phase-Change Composites with High Photothermal Conversion and Rapid Heat Storage and Release

Graphene-pentaerythritol solid–solid phase change composites with high photothermal conversion and thermal conductivity

3D porous copper foam-based shape-stabilized composite phase change materials for high photothermal conversion, thermal conductivity and storage

Aligned Channel Gelatin@nanoGraphite Aerogel Supported Form-Stable Phase Change Materials for Solar-Thermal Energy Conversion and Storage

Graphene-carbon nanotube hybrid aerogel/polyethylene glycol phase change composite for thermal management

Biomass homogeneity reinforced carbon aerogels derived functional phase‐change materials for solar‐thermal energy conversion and storage

Fe3O4/carbon-decorated graphene boosts photothermal conversion and storage of phase change materials

Hierarchical 3D Reduced Graphene Porous-Carbon-Based PCMs for Superior Thermal Energy Storage Performance

Superhydrophilic Modified Elastomeric RGO Aerogel Based Hydrated Salt Phase Change Materials for Effective Solar Thermal Conversion and Storage

Monolithic MXene Aerogels Encapsulated Phase Change Composites with Superior Photothermal Conversion and Storage Capability.

Three-dimensional rGO@sponge framework/paraffin wax composite shape-stabilized phase change materials for solar-thermal energy conversion and storage

Graphene Aerogels Enhanced Phase Change Materials Prepared by One-Pot Method with High Thermal Conductivity and Large Latent Energy Storage

Shape-stabilized, thermally conductive phase-change composites for thermal energy storage

Material preparation and heat transfer characterization of porous graphene aerogel composite phase change material

Highly Stable MXene-Based Phase Change Composites with Enhanced Thermal Conductivity and Photothermal Storage Capability