Abstract:Additive Manufacturing (AM) is one of the important technological pillars of Industry 4.0. Thanks to its tool-free manufacturing and extreme flexibility, AM has the potential to respond to individual customer preferences with a customized final product. Nevertheless, the size of 3D printed products is limited by the size of the build chamber of commercially available printers. In addition, deformations, stability, tolerances, and especially cost are highly dependent on the maximum size of the parts. Therefore, a larger final product can only be realized as an assembly group. Therefore, adhesive bonding appears to be an attractive solution for assembling parts made by AM. In this paper, a comparison of the influence of surface texture on the shear strength of 3D-printed metallic and polymeric adhesive joints was performed. A fish scale (FS) bio-inspired surface texture was chosen to examine how surface patterning influences the strength of joints. Fused deposition modeling (FDM) and selective laser melting (SLM) techniques were used to produce polycarbonate (PC) and stainless steel (17-4 PH) specimens, respectively. The effect of bio-surface and material type on the shear strength of adhesive joints was assessed using the ASTM D4501 standardized block shear testing method. The morphological analysis revealed that FDM exhibits reduced resolution and accuracy, making it less suitable for the additive manufacturing of complex surface features in 3D-printed parts when compared to SLM technology. In addition, bio-surface texturing significantly improved the wettability of stainless steel, requiring the synergy of higher surface free energy and increased surface roughness (FS bio-surface) for super-hydrophilicity, while a combination with lower surface free energy (PC material) and the same surface roughness resulted in hydrophobic behavior. On the other hand, the bio-surface texture greatly enhanced the shear strength (+31%) of stainless steel specimens, compared to PC specimens, due to the increase of physical adsorption forces and the enhancement of the mechanical interlocking effect. The analysis of variance (ANOVA) results highlight the predominant influence of material type on surface wettability (84%), while surface texture has a more pronounced impact on the shear strength of bonded joints (71%).

Comparison of textured nylon surfaces manufactured by CNC micromachining and 3D printing

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers

Multiobjective optimization of tribological characteristics of 3D printed texture surfaces for ABS and PLA Polymers

Additive manufacturing of short carbon filled fiber nylon: effect of build orientation on surface roughness and viscoelastic behavior

Mechanical and tribological properties of FDM-printed polyamide

Tribological Performance of Additive Manufactured PLA-Based Parts

Friction and Wear Behavior of 3D-Printed Inconel 718 Alloy under Dry Sliding Conditions

Surface Quality Evaluation of 3D-Printed Carbon-Fiber-Reinforced PETG Polymer During Turning: Experimental Analysis, ANN Modeling and Optimization

Study of the effect of bio-inspired surface texture on the shear strength of bonded 3D-printed materials: Comparison between stainless steel and polycarbonate joints

A Comparative Study of Precision Surface Grinding Using Additively Fabricated Acrylonitrile–Butadiene–Styrene (ABS) Wheels with Continuous and Serrated Working Surfaces

Study on the tribological characteristics of surface triangular textured TC4 alloy prepared by SLM technology

Effect of Reinforcement with Short Carbon Fibers on the Friction and Wear Resistance of Additively Manufactured PA12

Synergistic Effect of Carbon Micro/Nano-Fillers and Surface Patterning on the Superlubric Performance of 3D-Printed Structures

Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries

Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding

Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological Characteristics

Experimental Study of the Wear Performance of Fused Deposition Modeling Printed Polycarbonate-Acrylonitrile Butadiene Styrene Parts Using Definitive Screening Design and Machine Learning-Genetic Algorithm

Study of Abrasive Water Jet Machining as a Texturing Operation for Thin Aluminium Alloy UNS A92024

Comparative Study of the Dimensional and Shape Accuracy of Parts Made of 316L Manufactured Using the SLM and Casting Methods after Milling and WEDM

Experimental Investigation on Friction Behavior of Selective Laser Sintering Processed Parts