Abstract:Nanoscale mechanical resonator-based nanoelectromechanical systems have been reported with ultrahigh sensitivity, which are normally acquired from an ultravacuum environment at cryostat temperature. To facilitate their practical applications for gas sensing or bio-detection, it is critical to understand how the fluid (gas or liquid) environment will impact the resonance behaviors of the nanoresonator. This work reports a first-time comprehensive investigation on the influence of the N-2 gaseous environment on the resonance properties of carbon nanotube (CNT)-based mechanical resonator, through a combination of grand canonical Monte Carlo and large-scale molecular dynamics simulations. It is shown that the gaseous environment exerts a significant effect on the resonance properties of the CNT resonator through a dynamic desorption and readsorption process. Under the temperature of 100 K and the pressure of 1 bar, the displacement amplitude of the CNT resonator is found to experience a sharp reduction of about 82% within the first 90 ps vibration in the N-2 gaseous environment. Further, a large initial excitation is found to result in smaller adsorption and a reduced damping effect. For instance, when the excitation velocity amplitude increases from 2 to 8 angstrom/ps, the damping ratio shows more than 40% reduction. It is found that higher pressure leads to a smaller resonance frequency and enhanced damping effect, while higher temperature induces an increase in the resonance frequency but a decrease in the damping ratio. This work shows that the gaseous environment has a marked impact on the vibrational properties of nanoresonators, which should shed light on the application of mechanical nanoresonators in a fluid environment.

Microwave Resonators Embedded With Carbon Nanotubes for Real-Time Gas Sensing

How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator

Polymer Film Coated Micro/Nanofiber for Gas Sensing

Fully Inkjet-Printed Gas-Sensing Antenna Based on Carbon Nanotubes for Wireless Communication Applications

Fabrication of Carbon-Nanotube Sheet Based Hydrogen Sensor

A Sensitivity Enhanced Gas Sensor Based on Carbon Nanotubes Around Microfiber

Fabrication of Multiwall Carbon Nanotube Sheet Based Hydrogen Sensor on a Stacking Multi-Layer Structure.

Fabrication Of Sensor Based On Mwcnt For No2 And Nh3 Detection

Highly Sensitive Room-Temperature NO2 Gas Sensors Based on Three-Dimensional Multiwalled Carbon Nanotube Networks on SiO2 Nanospheres

Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Research Advances of Carbon Nanotube-based Gas Sensors

Study of Carbon Nanotubes Gas Sensor Based on Stochastic Resonance

Plasma-enhanced chemical vapor deposition carbon nanotubes for ethanol gas sensors

Preparation of water-based carbon nanotube inks and application in the inkjet printing of carbon nanotube gas sensors

Multi-walled Carbon Nanotube-Based Gas Sensors for NH3 Detection

Novel capacitive sensor: Fabrication from carbon nanotube arrays and sensing property characterization

Layer-by-layer Assembly Carbon Nanotubes Thin Film Based Gas Sensors for Ammonia Detection.

Ionization Gas Sensing in A Microelectrode System with Carbon Nanotubes

MEMS-based Microelectrode System Incorporating Carbon Nanotubes for Ionization Gas Sensing

Flammable and noxious gas sensing using a microtripolar electrode sensor with diameter and chirality sorted single-walled carbon nanotubes

Novel Gas Ionization Sensors Using Carbon Nanotubes