Non-negatively curved metrics on $S^2\times S^2$ admitting Killing fields

Valery Marenich

DOI: https://doi.org/10.48550/arXiv.math/0612389

2006-12-16

Abstract:%auto-ignore This paper has been withdrawn by the author, due to a crucial error.

Differential Geometry,Metric Geometry

What problem does this paper attempt to address?

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Weimin Sheng,Lixia Yuan

DOI: https://doi.org/10.1007/s11401-013-0809-5

2014-01-01

Abstract:The authors consider the problem of conformally deforming a metric such that the k-curvature defined by an elementary symmetric function of the eigenvalues of the Bakry-Emery Ricci tensor on a compact manifold with boundary to a prescribed function. A consequence of our main result is that there exists a complete metric such that the Monge-Ampère type equation with respect to its Bakry-Emery Ricci tensor is solvable, provided that the initial Bakry-Emery Ricci tensor belongs to a negative convex cone.
Deforming Metrics with Negative Curvature by a Fully Nonlinear Flow

Jiayu Li,Weimin Sheng

DOI: https://doi.org/10.1007/s00526-004-0287-4

2005-01-01

Calculus of Variations and Partial Differential Equations

Abstract:By studying a fully nonlinear flow deforming conformal metrics on compact and connected manifold, we prove that for $\lambda < 1$, any metric g with its modified Schouten tensor $A^\lambda_{g}\in \Gamma_k^-$ always can be deformed in a natural way to a conformal metric with constant $\sigma_k$-scalar curvature at exponential rate.
On Existence of the Prescribing $K$-Curvature Problem on Manifolds with Boundary

Yan He,Weimin Sheng

DOI: https://doi.org/10.4310/cag.2011.v19.n1.a3

2011-01-01

Communications in Analysis and Geometry

Abstract:In this paper, we study the problem of conformally deforming a metric to a prescribed kth order symmetric function of the eigenvalues of the Schouten tensor on compact Riemannian manifolds with totally geodesic boundary. We prove the solvability of the problem and the compactness of the solution set for the case k >= n/2, provided the conformal class admits a k-admissible metric. These results have been proved by Gursky and Viaclovsky, Trudinger and Wang for the manifolds without boundary, and by Jin et al. and S. Chen for the locally conformally flat manifolds with boundary.
On Positive Scalar Curvature and Moduli of Curves

Kefeng Liu,Yunhui Wu

DOI: https://doi.org/10.4310/jdg/1549422104

2019-01-01

Journal of Differential Geometry

Abstract:In this article we first show that any finite cover of the moduli space of closed Riemann surfaces of genus $g$ with $g\geq 2$ does not admit any Riemannian metric $ds^2$ of nonnegative scalar curvature such that $ds^2 \succ ds_{T}^2$ where $ds_{T}^2$ is the Teichm\"uller metric. Our second result is the proof that any cover $M$ of the moduli space $\mathbb{M}_{g}$ of a closed Riemann surface $S_{g}$ does not admit any complete Riemannian metric of uniformly positive scalar curvature in the quasi-isometry class of the Teichm\"uller metric, which implies a conjecture of Farb-Weinberger.
Rigidity for Nonnegatively Curved Metrics on S^2xR^3

Kristopher Tapp

DOI: https://doi.org/10.48550/arXiv.math/0210157

2002-10-10

Differential Geometry

Abstract:We address the question: how large is the family of complete metrics with nonnegative sectional curvature on S^2xR^3? We classify the connection metrics, and give several examples of non-connection metrics. We provide evidence that the family is small by proving some rigidity results for metrics more general than connection metrics.
Certain Symmetries of $\mathbb R^2$ with Diagonal Metrics

Adara M. Blaga

2024-10-16

Abstract:We put into light the Killing vector fields on $\mathbb R^2$ endowed with a family of diagonal Riemannian metrics. According to certain restrictions on the Lamé coefficients, we concretely describe the symmetries of the metric.

Differential Geometry
Killing Fields on Compact m-Quasi-Einstein Manifolds

Eric Cochran

2024-10-04

Abstract:We show that given a compact, connected $m$-quasi Einstein manifold $(M,g,X)$ without boundary, the potential vector field $X$ is Killing if and only if $(M, g)$ has constant scalar curvature. This extends a result of Bahuaud-Gunasekaran-Kunduri-Woolgar, where it is shown that $X$ is Killing if $X$ is incompressible. We also provide a sufficient condition for a compact, non-gradient $m$-quasi Einstein metric to admit a Killing field. We do this by following a technique of Dunajski and Lucietti, who prove that a Killing field always exists in this case when $m=2$. This condition provides an alternate proof of the aforementioned result of Bahuaud-Gunasekaran-Kunduri-Woolgar. This alternate proof works in the $m = -2$ case as well, which was not covered in the original proof.

Differential Geometry
Uniqueness of critical metrics for a quadratic curvature functional

Giovanni Catino,Paolo Mastrolia,Dario D. Monticelli

2023-03-15

Abstract:In this paper we prove new rigidity results for complete, possibly non-compact, critical metrics of the quadratic curvature functionals $\mathfrak{S}^2 = \int R_g^{2} dV_g$. We show that critical metrics $(M^n, g)$ with finite energy are always scalar flat, i.e. a global minimum, provided $n\geq 10$ or $7\leq n \leq 9$ and $M^n$ has at least two ends.

Differential Geometry
Teichmüller Space of Negatively Curved Metrics on Complex Hyperbolic Manifolds is Not Contractible

F. Thomas Farrell,Gangotryi Sorcar

DOI: https://doi.org/10.1007/s11425-016-0351-8

2017-01-01

Science China Mathematics

Abstract:We prove that for all n = 4k − 2 and k ≥ 2 there exists a closed smooth complex hyperbolic manifold M with real dimension n having non-trivial π 1(T <0(M)). T <0(M) denotes the Teichmüller space of all negatively curved Riemannian metrics on M, which is the topological quotient of the space of all negatively curved metrics modulo the space of self-diffeomorphisms of M that are homotopic to the identity
On Finsler Surfaces of Constant Flag Curvature with a Killing Field

R. L. Bryant,L. Huang,X. Mo

DOI: https://doi.org/10.1016/j.geomphys.2017.02.012

IF: 1.38

2017-01-01

Journal of Geometry and Physics

Abstract:We study two-dimensional Finsler metrics of constant flag curvature and show that such Finsler metrics that admit a Killing field can be written in a normal form that depends on two arbitrary functions of one variable. Furthermore, we find an approach to calculate these functions for spherically symmetric Finsler surfaces of constant flag curvature. In particular, we obtain the normal form of the Funk metric on the unit disk D^2.
Nonnegatively and Positively curved manifolds

Burkhard Wilking

DOI: https://doi.org/10.48550/arXiv.0707.3091

2007-07-20

Abstract:This is a survey written for a special edition of the journal of differential geometry.

Differential Geometry
Metrics of constant negative scalar-Weyl curvature

Giovanni Catino

DOI: https://doi.org/10.48550/arXiv.2101.07572

2021-01-19

Abstract:Extending Aubin's construction of metrics with constant negative scalar curvature, we prove that every $n$-dimensional closed manifold admits a Riemannian metric with constant negative scalar-Weyl curvature, that is $R+t|W|, t\in\mathbb{R}$. In particular, there are no topological obstructions for metrics with $\varepsilon$-pinched Weyl curvature and negative scalar curvature.

Differential Geometry
Conformal class of Lorentzian surfaces with Killing fields

Pierre Mounoud

2023-11-09

Abstract:We study the conformal classes of 2-dimensional Lorentzian tori with (non zero) Killing fields. We define a map that associate to such a class a vector field on the circle (up to a scalar factor). This map is not injective but has finite dimensional fiber. It allows us to characterize the conformal classes of tori with Killing field satisfying a condition related to the existence of conjugate points given by L. Mehidi.

Differential Geometry
Multiple Killing horizons and near horizon geometries

Marc Mars,Tim-Torben Paetz,José M M Senovilla

DOI: https://doi.org/10.1088/1361-6382/aaeaf1

IF: 3.5

2018-11-19

Classical and Quantum Gravity

Abstract:Near horizon geometries with multiply degenerate Killing horizons are considered, and their degenerate Killing vector fields identified. We prove that they all arise from hypersurface-orthogonal Killing vectors of any cut of with the inherited metric—cuts are spacelike co-dimension two submanifolds contained in . For each of these Killing vectors on a given cut, there are three different possibilities for the near horizon metric which are presented explicitly. The structure of the metric for near horizon geometries with multiple Killing horizons of order is thereby completely determined, and in particular we prove that the cuts on must be warped products with maximally symmetric fibers (ergo of constant curvature). The question whether multiple degenerate Killing horizons may lead to inequivalent near horizon geometries by using different degenerate Killings is addressed, and answered on the negative: all near horizon geometries built from a given multiple degenerate Killing horizon (using different degenerate Killings) are locally isometric.

astronomy & astrophysics,physics, multidisciplinary, particles & fields,quantum science & technology
Complex Product Manifolds Cannot Be Negatively Curved

Harish Seshadri,Fangyang Zheng

DOI: https://doi.org/10.4310/ajm.2008.v12.n1.a10

2008-01-01

Asian Journal of Mathematics

Abstract:We show that if M = X × Y is the product of two complex manifolds (of positive dimensions), then M does not admit any complete Kähler metric with bisectional curvature bounded between two negative constants. More generally, a locally-trivial holomorphic fibre-bundle does not admit such a metric.
Positive sectional curvature is not preserved under the Ricci flow in dimensions seven and thirteen

David González-Álvaro,Masoumeh Zarei

2024-03-21

Abstract:We prove that there exist $\mathsf{SU}_{3}$-invariant metrics on Aloff-Wallach spaces $W^7_{k_1, k_2}$, as well as $\mathsf{SU}_{5}$-invariant metrics on the Berger space $B^{13}$, which have positive sectional curvature and evolve under the Ricci flow to metrics with non-positively curved planes.

Differential Geometry
Complete Calabi-Yau metrics from Kahler metrics in D=4

Mauricio Leston,Osvaldo P. Santillan

DOI: https://doi.org/10.1103/PhysRevD.82.085004

2010-09-21

Abstract:In the present work the local form of certain Calabi-Yau metrics possessing a local Hamiltonian Killing vector is described in terms of a single non linear equation. The main assumptions are that the complex $(3,0)$-form is of the form $e^{ik}\widetilde{\Psi}$, where $\widetilde{\Psi}$ is preserved by the Killing vector, and that the space of the orbits of the Killing vector is, for fixed value of the momentum map coordinate, a complex 4-manifold, in such a way that the complex structure of the 4-manifold is part of the complex structure of the complex 3-fold. The link with the solution generating techniques of [26]-[28] is made explicit and in particular an example with holonomy exactly SU(3) is found by use of the linearization of [26], which was found in the context of D6 branes wrapping a holomorphic 1-fold in a hyperkahler manifold. But the main improvement of the present method, unlike the ones presented in [26]-[28], does not rely in an initial hyperkahler structure. Additionally the complications when dealing with non linear operators over the curved hyperkahler space are avoided by use of this method.

High Energy Physics - Theory,Differential Geometry
On Negatively Curved Finsler Manifolds of Scalar Curvature

XH Mo,ZM Shen

DOI: https://doi.org/10.4153/cmb-2005-010-3

2005-01-01

Canadian Mathematical Bulletin

Abstract:In this paper, we prove a global rigidity theorem for negatively curved Finsler metrics on a compact manifold of dimension it greater than or equal to 3. We show that for such a Finsler manifold, if the flag curvature is a scalar function on the tangent bundle, then the Finsler metric is of Randers type. We also study the case when the Finsler metric is locally projectively flat.
Curvatures of metric Jordan algebras

Hui Zhang,Zaili Yan,Zhiqi Chen

2024-05-20

Abstract:In this paper, we investigate metric Jordan algebras, and follow the lines of the paper (J. Milnor: Curvatures of left invariant metrics on Lie groups. Adv. Math. (1976)). Firstly, we define the Jordan-Levi-Civita connection, then we show that every metric Jordan algebra admits a unique Jordan-Levi-Civita connection. Secondly, using the Jordan-Levi-Civita connection, we introduce three natural curvature tensors on metric Jordan algebras, and obtain the corresponding curvature formulas. Thirdly, based on these curvature formulas, we prove that every formally real Jordan algebra admits both a metric of non-positive Jordan curvature, and a Jordan-Einstein metric of negative Jordan scalar curvature. Besides, for nilpotent Jordan algebras, we prove that they admit no Jordan-Einstein metrics.

Differential Geometry,Commutative Algebra,Rings and Algebras
Killing vector field of the metric II+III on Tangent Bundle

Melek Aras

DOI: https://doi.org/10.48550/arXiv.1303.0182

2013-03-01

Differential Geometry

Abstract:The main purpose of the paper is to investigate Killing vector field on the tangent bundle T(M_{n}) of the Riemannian manifold with respect to the Levi-Civita connection of the metric II+III .

Non-negatively curved metrics on $S^2\times S^2$ admitting Killing fields

Prescribing Curvature Problems on the Bakry-Emery Ricci Tensor of a Compact Manifold with Boundary

Deforming Metrics with Negative Curvature by a Fully Nonlinear Flow

On Existence of the Prescribing $K$-Curvature Problem on Manifolds with Boundary

On Positive Scalar Curvature and Moduli of Curves

Rigidity for Nonnegatively Curved Metrics on S^2xR^3

Certain Symmetries of $\mathbb R^2$ with Diagonal Metrics

Killing Fields on Compact m-Quasi-Einstein Manifolds

Uniqueness of critical metrics for a quadratic curvature functional

Teichmüller Space of Negatively Curved Metrics on Complex Hyperbolic Manifolds is Not Contractible

On Finsler Surfaces of Constant Flag Curvature with a Killing Field

Nonnegatively and Positively curved manifolds

Metrics of constant negative scalar-Weyl curvature

Conformal class of Lorentzian surfaces with Killing fields

Multiple Killing horizons and near horizon geometries

Complex Product Manifolds Cannot Be Negatively Curved

Positive sectional curvature is not preserved under the Ricci flow in dimensions seven and thirteen

Complete Calabi-Yau metrics from Kahler metrics in D=4

On Negatively Curved Finsler Manifolds of Scalar Curvature

Curvatures of metric Jordan algebras

Killing vector field of the metric II+III on Tangent Bundle