Abstract:We investigate the deformation of aluminum alloy containing copper in the form of fine Al-Cu clusters 1–4 nm in diameter with multiscale approach. A part of these precipitates (clusters of 1–2 nm in diameter) reproduce that were experimentally obtained by (Sun et al., 2019) by cyclic dynamic loading of aluminum alloy. At the first stage, molecular dynamics (MD) reveals that main mechanism of interaction of dislocation with the copper-containing cluster are cutting of precipitate for 1 nm cluster and bypass by Orowan mechanism for clusters with diameters above 1.4 nm. Single events of climb are observed in MD, frequency of which increases with a temperature raise. The stresses level realized for the climb mechanism practically do not differ from that of the basic mechanism for the considered inclusion diameters. Also, the results of MD simulations show that the strength of the cluster depends on the presence of enough number of copper atoms on the slip plane of dislocation and does not directly depend on the concentration of copper when it varies in the range of 20–100% inside the precipitate. Reduction of copper concentration below 20% decreases the precipitate resistance, and the system behavior converges to the case of pure aluminum at 0%. These results are supported by MD calculations of generalized stacking fault energy, which demonstrate a weak dependence of unstable stacking fault energy on copper concentration in the range of 30–70%. A continuum model of dislocation motion in aluminum containing the copper-containing cluster is proposed, which considers the kinetics of dislocation-precipitate interaction and accounts for the transition from cutting to bypass. Parameters of the model are fitted to MD data with Bayesian algorithm. Model of dislocation motion and dislocation-precipitate interaction is implemented into 2D discrete-dislocation dynamics (DDD). Flow stress of alloy predicted with DDD demonstrates reasonable agreement with the experimental data. Calculations show that the cluster-strengthened alloy demonstrates much less inhomogeneity of plastic deformation in comparison with the alloy with a comparable flow stress and volume fraction of typical phases precipitated during classical aging, which is also in line with the experiment.

Using Cluster Dynamics to Model Electrical Resistivity Measurements in Precipitating Al-Sc Alloys

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Precipitation in Al-Zr-Sc alloys: a comparison between kinetic Monte Carlo, cluster dynamics and classical nucleation theory

Effects of Nanosized Precipitates on the Portevin-Le Chatelier Behavior: Model Prediction and Experimental Verification

Ab Initio Investigation Of Phosphorus And Hydrogen Co-segregation And Embrittlement In α-fe Twin Boundaries

Phase-Field Modelling of Evolution of Compact Ordered Precipitates in Ternary Alloy Systems

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Dendritic Solidification of Highly Undercooled Dilute Alloys

Atomistic insights into cluster strengthening in aluminum alloys

Dislocation dynamics prediction of the strength of Al-Cu alloys containing shearable $θ''$ precipitates

Phase-Field Simulation of Microsegregation and Dendritic Growth During Solidification of Hypoeutectic Al-Cu alloys

Multiscale modelling of the morphology and spatial distribution of θ' precipitates in Al-Cu alloys

Modeling of heterogeneous site energy distributions in precipitate nucleation

Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation

Study of Θ’ Precipitation Behavior in Al-Cu-Cd Alloys by Phase-Field Modeling

Classical nucleation theory in ordering alloys precipitating with L12 structure

Predicting the morphologies of γ' precipitates in cobalt-based superalloys

Experimental and Modelling Assessment of Ductility in a Precipitation Hardening AlMgScZr Alloy

Numerical Simulation of Copper Precipitation During Aging in Deformed Fe-Cu Alloys

Prediction of shear strength of cluster-strengthened aluminum with multi-scale approach describing transition from cutting to bypass of precipitates by dislocations

The effect of shearable clusters and precipitates on dynamic recovery of Al alloys