Abstract:High contrast imaging can use pupil apodizers to suppress diffracted starlight from a bright source in order to observe its environs. Metallic half-tone dot transmissive apodizers were developed for the Gemini Planet Imager (GPI) and ESO SPHERE coronagraphs for use in the near-IR. Dot sizes on the scale of the wavelength of the light often result in unexpected variations in the optical transmission vs. superficial dot density relation. We measured 5 and 10 micron half-tone microdot screens' transmissions between 550 - 1050 nm to prepare to fabricate apodizations that mitigate diffraction by segments gaps and spiders on future large space telescopes. We utilized slow test beams (f/40, f/80) to estimate the on-axis (far-field, or zero-order) transmission of test patches using a Fourier Transform Spectrograph on Beamline U10B at Brookhaven National Laboratory's National Synchrotron Light Source (BNL NSLS). We also modified our previous GPI IR characterization hardware and methods for this experiment. Our measurements show an internal consistency of 0.1% in transmission, a factor of 5 better than our near-IR GPI work on the NSLS U4IR beamline. The systematics of the set-up appeared to limit the absolute calibration for our f/40 data on the 50-patch, maximum Optical Density 3 (OD3), sample. Credible measurements of transmissions down to about 3% transmission were achieved for this sample. Future work on apodizers for obstructed and segmented primary mirror coronagraphs will require configurations that mimic the intended diffractive configurations closely in order to tune apodizer fabrication to any particular application, and measure chromatic effects in representative diffractive regimes. Further experimental refinements are needed to measure the densest test patches which possess transmissions less than a few percent. The new NSLS-II should provide much greater spectral stability of its synchrotron beam, which will improve measurement accuracy and reduce systematics.

A Reflective Gaussian Coronagraph for ExAO: Laboratory Performance

Comparative Lyot Coronagraphy with Extreme AO Systems

High contrast experiment of an AO-free coronagraph with a checkerboard pupil mask

Dual Purpose Lyot Coronagraph Masks for Simultaneous High-Contrast Imaging and High-Resolution Wavefront Sensing

Comparison of coronagraphs for high contrast imaging in the context of Extremely Large Telescopes

Theory and laboratory tests of the multi-stage phase mask coronagraph

Multi-stage four-quadrant phase mask: achromatic coronagraph for space-based and ground-based telescopes

Optimized focal and pupil plane masks for vortex coronagraphs on telescopes with obstructed apertures

Laboratory and On-Sky Validation of the Shaped Pupil Coronagraph's Sensitivity to Low-Order Aberrations With Active Wavefront Control

On-sky performance analysis of the vector Apodizing Phase Plate coronagraph on MagAO/Clio2

Focal Plane Wavefront Sensing with the FAST TGV Coronagraph

10^{-7} contrast ratio at 4.5Lambda/D: New results obtained in laboratory experiments using nano-fabricated coronagraph and multi-Gaussian shaped pupil masks

Experimental study of a low-order wavefront sensor for a high-contrast coronagraphic imager at 1.2 lambda/D

Multi-Color Coronagraph Experiment in a Vacuum Testbed with a Binary Shaped Pupil Mask

Coronagraphic phase diversity: performance study and laboratory demonstration

Fast Linearized Coronagraph Optimizer (FALCO) IV. Coronagraph design survey for obstructed and segmented apertures

Absorption Line Shape of a One-Dimensional Bose Gas

Lyot-based Low Order Wavefront Sensor: Implementation on the Subaru Coronagraphic Extreme Adaptive Optics System and its Laboratory Performance

On-sky observations with an achromatic hybrid phase knife coronagraph in the visible

Simulating the performance of aperture mask designs for SCALES

Calibrating Apodizer Fabrication Techniques For High-Contrast Coronagraphs On Segmented And Monolithic Space Telescopes