Abstract:High cooling rates within the selective laser melting (SLM) process can generate large residual stresses within fabricated components. Understanding residual stress development in the process and devising methods for in-situ reduction continues to be a challenge for industrial users of this technology. Computationally efficient FEA models representative of the process dynamics (temperature evolution and associated solidification behaviour) are necessary for understanding the effect of SLM process parameters on the underlying phenomenon of residual stress build-up. The objective of this work is to present a new modelling approach to simulate the temperature distribution during SLM of Ti6Al4V, as well as the resulting melt-pool size, solidification process, associated cooling rates and temperature gradients leading to the residual stress build-up. This work details an isotropic enhanced thermal conductivity model with the SLM laser modelled as a penetrating volumetric heat source. An enhanced laser penetration approach is used to account for heat transfer in the melt-pool due to Marangoni convection. Results show that the developed model was capable of predicting the temperature distribution in the laser/powder interaction zone, solidification behaviour, the associated cooling rates, melt-pool width (with 14.5% error) and melt-pool depth (with 3% error) for SLM Ti6Al4V. The model was capable of predicting the differential solidification behaviour responsible for residual stress build-up in SLM components. The model-predicted trends in cooling rates and temperature gradients for varying SLM parameters correlated with experimentally measured residual stress trends. Thus, the model was capable of accurately predicting the trends in residual stress for varying SLM parameters. This is the first work based on the enhanced penetrating volumetric heat source, combined with an isotropic enhanced thermal conductivity approach. The developed model was validated by comparing FEA melt-pool dimensions with experimental melt-pool dimensions. Secondly, the model was validated by comparing the temperature evolution along the laser scan path with experimentally measured temperatures from published literature.

Effects of thermal cycling on residual stress in alloy parts via selective laser melting

Study of residual stress in selective laser melting of Ti6Al4V

Review on residual stress in selective laser melting additive manufacturing of alloy parts

The Effect of Scanning Strategy on the Thermal Behavior and Residual Stress Distribution of Damping Alloys during Selective Laser Melting

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Micro-scale thermodynamic model of microstructure and stress evolution in parts via selective laser melting

Finite Element Analysis of Thermal Stress and Thermal Deformation in Typical Part during SLM

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

A Simulation Study on the Effect of Residual Stress on the Multi-Layer Selective Laser Melting Processes Considering Solid-State Phase Transformation

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach

Effect of Thermal Cycle on Microstructure Evolution and Mechanical Properties of Selective Laser Melted Low-Alloy Steel

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder

Estimation of Residual Stress in Selective Laser Melting of a Zr-Based Amorphous Alloy

Simulation of Stress Field during the Selective Laser Melting Process of the Nickel-Based Superalloy, GH4169

An Experimental Investigation into Residual Stress Control of 24CrNiMo Alloy Steel by Selective Laser Melting

Effect of Laser Remelting on Deposition Quality, Residual Stress, Microstructure, and Mechanical Property of Selective Laser Melting Processed Ti-5Al-2.5Sn Alloy

The Low-Cycle Fatigue Behavior, Failure Mechanism and Prediction of SLM Ti-6Al-4V Alloy with Different Heat Treatment Methods