Thermal transformations during thermal recovery of end-of-life composite carbon fiber beams from wind turbine blades

Han Jiang,Lichao Ge,Hongcui Feng,Chunyao Xu,Qingyuan Yang,Xinkai Li,Xin Liu,Yang Wang,Chang Xu

DOI: https://doi.org/10.1016/j.jaap.2024.106879

IF: 6

2024-11-28

Journal of Analytical and Applied Pyrolysis

Abstract:The effect of thermal recovery technology on the composite carbon fiber beams from wind turbine blades was investigated. Nonisothermal thermogravimetric experiments performed under different atmospheres showed that the reaction activation energy were the smallest for N 2 , and Δm was approximately 21.64%. The activation energy was largest in air. The activation energies of the nonisothermal reactions at heating rates of 5, 10, and 15 °C/min in N 2 were 93.43, 116.95 and 128.86 kJ/mol, respectively. Higher heating rates led to more difficult reactions. The compositions of the products formed during isothermal pyrolysis at 600 °C were analyzed. CO 2 was the main component of gaseous products; and the remaining components were small combustible gases, which accounted for 4.58% of the total. The liquid tar product was approximately 21.28%, featuring mostly aromatic substances containing arene rings, similar to phenol. The solid products accounted for approximately 74.14% of the weight of the original reactant. The reaction mechanism was analyzed; it was mainly the resin component of the composite that reacted, and the recovered carbon fibers remained essentially unchanged after the reaction. These results showed that it is feasible to recover carbon fibers from wind turbine blade composite carbon fiber beams by pyrolysis.

engineering, chemical,chemistry, analytical,energy & fuels