Abstract:Renewable energy production with wind turbines has been rising in the last 30 years and it is a crucial technology, which is necessary for the energy transition. As sustainable as the energy production of wind turbines is, the waste management of the blade material is not. Most of the blades end up on a landfill or get incinerated. There are different types of recycling methods, but the most commonly used is to shred the fibers into little pieces and reusing them for filler material in the concrete industry. This approach does not actually split up the blade material into its components but it is more of a downcycling. In this thesis, a new type of pyrolysis will be looked into, which splits up the blade material into its components namely glass fibers and plastic using molten salt. This process would make the glass fiber industry more sustainable by introducing a recycled glass fiber with minimal loss in quality. In a first step, the blade material will be examined more closely with a thermogravimetric analysis to find out what kind of plastic it is and what temperature would be necessary to pyrolyze it. This information will be used to conduct an experiment in a molten salt solution and determine the necessary reaction time and temperature. This data will be used to compare the costs of this method with shredding the material and the conventional pyrolysis. From the thermogravimetric analysis, it was possible to determine that the type of plastic used in this turbine was made out of epoxy. The maximum degredation of this material occurred at 380 ◦C. Not many experiments could be conducted in order to find the optimal conditions for the pyrolysis process due to difficulties with the furnace. Nevertheless, one sample was successfully pyrolyzed at a temperature of 400 ◦C with a residence time of 15 minutes. With the current market conditions in the recycled glass fibers industry, this product would be too expensive and the demand would be too little. However, the market is expected to grow in the next couple years due to rising interests in circular economy and governments introducing regulations. Nevertheless, it is necessary to increase the efficiency of the molten salt pyrolysis in order to be applicable to a bigger scale. More experiments should be conducted with cheaper molten salt in order to sink the costs of the process. © Uppsala University Kerstin Benz

Recovery of energy and carbon fibre from wind turbine blades waste (carbon fibre/unsaturated polyester resin) using pyrolysis process and its life-cycle assessment

Recovery of styrene-rich oil and glass fibres from fibres-reinforced unsaturated polyester resin end-of-life wind turbine blades using pyrolysis technology

Pyrolysis kinetic behaviour and thermodynamic analysis of waste wind turbine blades (carbon fibres/unsaturated polyester resin)

Pursuing the circularity of wind turbine blades: Thermochemical recycling by pyrolysis and recovery of valuable resources

Characteristics, kinetics and product distribution on pyrolysis process for waste wind turbine blades

Oxidative liquefaction as an alternative method of recycling and the pyrolysis kinetics of wind turbine blades

In-situ pyrolysis kinetic analysis and fixed-bed pyrolysis behavior of ex-service wind turbine blades

Analysis of the pyrolysis process, kinetics and products of the base components of waste wind turbine blades (epoxy resin and carbon fiber)

A life cycle assessment of the laboratory—scale oxidative liquefaction as the chemical recycling method of the end-of-life wind turbine blades

The pyrolysis of end-of-life wind turbine blades under different atmospheres and their effects on the recovered glass fibers

Valorization of the plastic residue from a WEEE treatment plant by pyrolysis

Experimental Study and Process Simulation on Pyrolysis Characteristics of Decommissioned Wind Turbine Blades

Pyrolysis-recycling Utilization Properties Waste Wind Turbine Composite Blades

End-of-life wind blade recycling through thermal process

The application of chromatographic methods in optimization and the enhancement of the oxidative liquefaction process to wind turbine blade recycling

Recycling of fiber reinforced composites: Online mass spectrometric tracing, offline physicochemical speciation and toxicological evaluation of a pilot plant pyrolytic conversion

An in-depth study of the oxidative liquefaction process for polymeric waste reduction and chemical production from wind turbine blades and personal protective equipment used in the medical field

Study on isothermal pyrolysis and product characteristics of basic components of waste wind turbine blades

Co-pyrolysis of waste wind turbine blades and biomass and their kinetic analysis using artificial neural network

Recycling Glass Fiber from Polyurethane Composite by Pyrolysis Strategy with High Mechanical Properties

Recovering high-quality glass fibers from end-of-life wind turbine blades through swelling-assisted low-temperature pyrolysis