Abstract:Removal of trace heavy metal ions puts high demands on designing adsorbents with favorable surfaces. Crystal-plane engineering can provide controllable adsorption energy between surficial planes and adsorbents. Herein, we have creatively synthesized Mg-doped CaCO3 nanoarchitectures assembled by layered sheets (Mg-CaCO3 LSs) with high-index facets of ( $$4\overline{41}$$ ) through a facile wet chemical process. Adsorption tests reveal that the layer-by-layer assembled sample exhibits a maximum Pb(II) adsorption capacity of 1961.9 mg·g−1, agreeing with the monolayer-adsorption Langmuir model. At an initial Pb(II) ion concentration of 20 mg·L−1, the adsorption can achieve a high removal rate near 99.0% within 1 min, and the adsorption kinetics follows a chemisorption pseudo-second-order model. Interestingly, the Mg-CaCO3 LSs show much-improved adsorption properties towards low-concentration Pb(II) ions, which could reduce the concentration from 1 mg·L−1 to ~ 2.9 μg·L−1 in 3 h (within 30 min decrease to less than 10 μg·L−1, meeting drinking water standard from WHO). For comparison, the commercial CaCO3 and collected CaCO3 scale show much lower adsorption values with Pb(II) ion residual concentration of ~ 935.0 and ~ 944.9 μg·L−1 in 3 h, respectively. X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and inductively coupled plasma (ICP) characterizations on the Mg-CaCO3 LSs before and after adsorbing Pb(II) confirm that the high removal performance could be ascribed to fast metal ion exchange and excellent physical adsorption contributed by high-index planes. The density functional theory (DFT) calculations also confirm that the much-enhanced adsorption kinetics benefits from the optimal adsorption of the ( $$4\overline{41}$$ ) planes. This work will provide a feasible route to design high-efficient low-cost adsorbents through crystal-plane engineering. 有效去除水中痕量重金属离子对吸附剂的结构设计提出了很高的要求。利用晶面构建工程对催化剂结构进行设计是一个有效地解决方法。在本工作中，我们通过湿化学合成法，制备了由( $$4\overline{41}$$ ) 高指数面组装的 Mg 掺杂 CaCO3 纳米结构(Mg-CaCO3 LSs)。实验结果证明，层状组装结构的Mg-CaCO3LSs对Pb(II)的最大吸附容量为1961.9 mg·g-1, 并符合单层Langmuir 吸附模型。当 Pb(II)的初始浓度为20 mg·L-1时, Mg-CaCO3 LSs表现出接近于99%的去除效率(吸附时间为1 min)。该吸附动力学过程遵循化学吸附准二级动力学模型方程。同时，在极低Pb(II)浓度下, Mg-CaCO3 LSs还表现出优异的吸附去除性能。当Pb(II) 的浓度为1 mg·L-1 时, Mg-CaCO3LSs能够在3 小时内将浓度降至~2.9 μg·L-1。其中，在30 分钟内就能将Pb(II)浓度降至10 μg·L-1以下, 这是符合WHO 所颁布的饮用水标准的。作为对比，商业CaCO3 和收集的CaCO3 水垢在相同的测试条件下却分别只能将浓度降低至~935 μg·L-1 和~944.9 μg·L-1。通过对吸附前后Mg-CaCO3 LSs样品进行XRD, EDS 和ICP 表征，我们发现其优异的去除效果可归因于高指数晶面的快速金属离子交换和物理吸附过程。理论计算 (DFT)进一步证明了( $$4\overline{41}$$ ) 高指数面具有更优的吸附动力学行为。本工作通过晶面构建工程，提供了一种设计高性能低成本的吸附剂材料的设计思路。

Efficient elimination behavior and mechanism of heavy metal by eco-friendly potassium titanium trisilicate

Twofold Interpenetrated Cationic Metal-Organic Framework with Hydrophobic Channels for Effectively Trapping Toxic Oxo-Anions

Coordination/cation exchangeable dual sites intercalated multilayered T3C2Tx MXene for selective and ultrafast removal of thallium(I) from water

Highly-efficient removal of Pb(ii), Cu(ii) and Cd(ii) from water by novel lithium, sodium and potassium titanate reusable microrods

Synthesis and characterization of thiazolidinone -functionalized MCM-41 and kaolinite nanocomposites as the powerful and new adsorbents for heavy metal removal: process optimization using RSM-CCD

Iminodiacetic acid-functionalized porous polymer for removal of toxic metal ions from water

In situ Functionalized Mesoporous Silicas for Sustainable Remediation Strategies in Removal of Inorganic Pollutants from Contaminated Environmental Water.

Highly recyclable magnetic Fe 3 O 4 @CSH derived from industrial silicon residue: Application in heavy metal ion adsorption

Effective Removal of Toxic Heavy Metal Ions from Aqueous Solution by CaCO3 Microparticles

Functionalized dual modification of covalent organic framework for efficient and rapid trace heavy metals removal from drinking water

Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Efficient adsorption and advanced purification of metal ions induced by synergistic effect of amine and thione on covalent organic frameworks

Efficient Removal of Pb(II), Cr(VI), and Tetracycline Hydrochloride from Aqueous Solutions Using UiO-66-AMP@PAN: Thermodynamics, Kinetics, and Isothermal Adsorption

Efficient removal of heavy metals using 1,3,5-benzenetricarboxylic acid-modified Zirconium-based organic frameworks

A high-selective and stable melamine form with economic and simple decoration for purification of thallium(I)-contaminated water

Solid-phase synthesis of bi-functionalized porous organic polymer for simultaneous removal of Hg(II) and Pb(II)

Bi-functionalized MCM-41 for heavy metal ions removal: synthesis, enhanced performance and mechanism study

Thiol/nitrogen functionalized Fe3O4@ZIF-8-DMTD by one-pot post coordination modulation for efficient and rapid removal of trace heavy metals from drinking water

Highly selective and ultrafast removal of cadmium and copper from water by magnetic core-shell microsphere

Enhanced removal of Pb(II) and organics by titanate in a designed simultaneous process

Mg-doped CaCO3 nanoarchitectures assembled by ( $$4\overline{41}$$ ) high-index facets for efficient trace removal of Pb(II)