Recovery of rare earths, lithium and fluorine from rare earth molten salt electrolytic slag via fluoride sulfate conversion and mineral phase reconstruction
Lei Tian,Lijie Chen,Ao Gong,Xuangao Wu,Caifang Cao,Zhifeng Xu
DOI: https://doi.org/10.1016/j.mineng.2021.106965
IF: 5.479
2021-08-01
Minerals Engineering
Abstract:To solve the problem of rare earths (RE) lithium (Li) and fluorine (F) recovery in rare earth molten salt electrolysis slag, a recovery method was developed based on magnetic separation, sulfuric acid leaching, HF recycling, water leaching, fluorination precipitation. First, RE, Li and iron-containing phases in a slag sample were separated using a magnetic separation method. Second, sulfuric acid-leaching was used to reconstruct the phases of RE and Li in the non-magnetic fraction, which were transformed into a rare earth sulfate easily dissolved in water. At the same time, the HF generated in the sulfuric acid leaching process is recovered by multistage adsorption. Finally, qualified fluoride rare earth products were obtained by HF cycle precipitation. The results show that the recovery of iron is 85.30% under the condition that the magnetic separation intensity of 0.668 T, particle size of 58–75 μm, and the main phase in the non-magnetic fraction is the rare earth phase, and the iron content is only 2.90%. Under the conditions of a concentrated acid concentration of 98.00%, a temperature of 633 K, a liquid–solid ratio of 2:1, a particle size of 58–75 μm, a constant stirring speed of 300 r·min−1, and reaction time of 3 h, the removal rate of F is 95.30%, and the transformation rates of Nd, Pr, Dy, and Li reached more than 95.00%. Through water immersion and fluorination precipitation, rare earth fluoride products can be obtained. The purity, particle size, and water content of the products met the standards required for industrial rare earth molten salt electrolysis.
engineering, chemical,mining & mineral processing,mineralogy