Abstract:We report the effect of radio frequency (RF) acetylene plasma on the dynamics and composition of titanium (Ti) plasma plume in a plasma-enhanced pulsed laser deposition (PEPLD) system. The titanium target, mounted inside a capacitively coupled RF discharge, was ablated by using a nanosecond Nd:YAG pulsed laser at 1064 nm with a power density of 2.65 GW/cm 2 . The experiments were performed at different operating pressures of acetylene. Fast imaging and optical emission spectroscopy were employed to study the physics behind the pulsed laser deposition in both (PLD) and PEPLD systems. A nonlinear dependence of the plasma plume evolution was observed over a range of pressure. Different expansion regimes correspond to the pressure of the experiments. The plume expansion velocity ranges between 6 × 10 3 m/s and 30 × 10 3 m/s. Emission spectra reveal the presence of C II and Ti II lines depending on the experimental conditions. The presence of background RF plasma leads to substantial enhancement of the emission intensity of the C II spectral lines. In addition, with increasing RF power and background pressure, the intensities of the C II spectral lines increase; whereas the intensities of the Ti II spectral lines decrease with the increase in RF power. Plasma temperature was estimated from the Ti II lines using the Boltzmann plot method, whereas the electron density was estimated from the Stark-broadened Ti II line at 454.9 nm. The calculated densities and temperatures lie between 10 17 –10 18 cm −3 and 0.8–2.0 eV, respectively. These results show the effects of the different backgrounds (either neutral or RF plasma) on the propagation of the laser-produced plasma (LPP), which we propose to be useful in the thin film deposition process using PLD.

Titanium plasma source for capillary discharge extreme ultraviolet lasers

Experimental study of a microsecond-pulsed cold plasma jet

Collimated Proton Beam from an Ultra-Intense Laser Pulse Irradiating Parallel to the Plasma Interface

Single-cycle Megawatt Terahertz Pulse Generation from a Wavelength-Scale Plasma Oscillator Driven by Ultrashort Laser Pulses

Single-cycle Powerful Megawatt to Gigawatt Terahertz Pulse Radiated from a Wavelength-Scale Plasma Oscillator

Single-cycle Powerful Terahertz Pulse Generation from Vacuum-Plasma Interface Driven by Intense Laser Pulses

Pulsed vacuum arc plasma source of supersonic metal ion flow

A dc plasma source for plasma–material interaction experiments

An Atomic Beam of Titanium for Ultracold Atom Experiments

Elongation of Plasma Channel for Electron Acceleration

A Micro-Scale Low-Temperature Atmospheric Micro-Plasma Jet with Hollow-Cone Electrodes

Sub-cycle Nanotip Field Emission of Electrons Driven by Air Plasma Generated THz Pulses

Transient Hollow Cathode Effects and Z pinch Formation in a High Current Capillary Discharge with a Metal Plasma

Experimental Study of a Compact Surface Flashover Ion Source

Characterization Of An Atmospheric Double Arc Argon-Nitrogen Plasma Source

Teravolt-per-meter plasma wakefields from low-charge, femtosecond electron beams

Effect of RF acetylene plasma on the composition and dynamics of a titanium plasma plume in a plasma enhanced pulsed laser deposition system

A stable atmospheric-pressure plasma for extreme-temperature synthesis

Electron Acceleration Based On An Elongated Plasma Channel

Plasma-guided Compton source

Control of electron dynamics, radical and metastable species generation in atmospheric pressure RF plasma jets by Voltage Waveform Tailoring