Abstract:Void coalescence and interaction in dynamic fracture of ductile metals have been investigated using three-dimensional strain-controlled multi-million atom molecular dynamics simulations of copper. The correlated growth of two voids during the coalescence process leading to fracture is investigated, both in terms of its onset and the ensuing dynamical interactions. Void interactions are quantified through the rate of reduction of the distance between the voids, through the correlated directional growth of the voids, and through correlated shape evolution of the voids. The critical inter-void ligament distance marking the onset of coalescence is shown to be approximately one void radius based on the quantification measurements used, independent of the initial separation distance between the voids and the strain-rate of the expansion of the system. The interaction of the voids is not reflected in the volumetric asymptotic growth rate of the voids, as demonstrated here. Finally, the practice of using a single void and periodic boundary conditions to study coalescence is examined critically and shown to produce results markedly different than the coalescence of a pair of isolated voids.

What problem does this paper attempt to address?

### What problem does this paper attempt to solve? This paper aims to study the coalescence phenomenon of voids in ductile metals during the dynamic fracture process. Specifically, through three - dimensional strain - controlled multi - million - atom molecular dynamics simulations, the author explores the related growth, dynamic interaction and its mechanism during the coalescence of two voids in copper materials. The following are the main research objectives of the paper: 1. **Determine the starting point of void coalescence**: - Through quantitative measurement, the paper determines the critical inter - void ligament distance (ILD), that is, the distance when the voids start to coalesce. Research shows that this critical distance is approximately the size of a void radius and is independent of the initial separation distance and strain rate. 2. **Study the interaction mechanism between voids**: - The interaction between voids not only occurs when they are in direct contact, but is also affected by elastic and plastic fields. The elastic strain field generated by each void will affect the plastic deformation of the surrounding material, and then affect the growth rate and shape evolution of other voids. 3. **Evaluate the influence of different simulation settings**: - The author critically evaluates the method of using a single void and periodic boundary conditions to study coalescence, and points out that the results obtained by this method are significantly different from the coalescence results of isolated void pairs. 4. **Understand the influence of void coalescence on material fracture**: - Void coalescence is a key step in the fracture of ductile metals at high strain rates. Understanding this process is helpful for developing more accurate continuum fracture models, so as to better predict and control the fracture behavior of materials. ### Key formulas - **Critical inter - void ligament distance (ILD)**: \[ \text{ILD}_c = 0.5\pm0.1 \, d \] where \( d \) is the void diameter, and the calculation formula is \( d = 2 \left( \frac{3V_{\text{void}}}{4\pi} \right)^{1/3} \), \( V_{\text{void}} \) is the void volume. - **Average stress (\(\sigma_m\))**: \[ \sigma_m = -\frac{1}{3V} \left( \sum_i \frac{|\vec{p}_i|^2}{m_i} + \sum_{i,j, j>i} \vec{r}_{ij} \cdot \vec{f}_{ij} \right) \] where \( V \) is the system volume, \(\vec{p}_i\) is the atomic momentum, \( m_i\) is the atomic mass, \(\vec{r}_{ij}\) is the relative position, \(\vec{f}_{ij}\) is the force. Through these studies, the author hopes to fill the gap between existing theories and experiments, especially to understand the specific mechanism of void coalescence in the ductile metal fracture process at the micro - scale.

Three-dimensional molecular dynamics simulations of void coalescence during dynamic fracture of ductile metals

The onset of void coalescence during dynamic fracture of ductile metals

Effect of stress-triaxiality on void growth in dynamic fracture of metals: a molecular dynamics study

Investigation on void growth and coalescence in single crystal copper under high-strain-rate tensile loading by atomistic simulation

Void Growth in BCC Metals Simulated with Molecular Dynamics using the Finnis-Sinclair Potential

Mass Transfer and Morphology Change Via Dislocation Emission in a Macroporous FCC Metal

Molecular dynamics simulations of dislocation interaction with voids in nickel

High-strain-rate Void Growth in High Entropy Alloys: Suppressed Dislocation Emission = Suppressed Void Growth

An uncoupled ductile fracture model considering void shape change and necking coalescence

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

Ductile failure modeling

Fracture of Void-Embedded High-Entropy-Alloy Films: A Comprehensive Atomistic Study

Effects of void shape and location on the fracture and plastic deformation of Cu (crystalline) /Cu 64 Zr 36 (amorphous) composites

Atomic scale studies of spall behavior in nanocrystalline Cu

Molecular Dynamics Study on the Nano-Void Growth and Coalescence at Grain Boundary

The mechanistic origins of heterogeneous void growth during ductile failure

Interaction of void spacing and material size effect on inter-void flow localisation

In-situ Three-dimensional Investigation on Micro Ductile Fracture Mechanism of Mild Steel

Effects of Void and Temperature on Fracture of Cu/Cu 3 Sn Bilayers: A Molecular Dynamics Study

Molecular Dynamics Simulations of Void Effect of the Copper Nanocubes under Triaxial Tensions

Three Dimensional Dislocation-Loop Emission Criterion for Void Growth of Ductile Metals