Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Preparation and particle size effects study of sustainable self-cleaning and durable silicon materials with superhydrophobic surface performance

Nano-silica modified with silane and fluorinated chemicals to prepare a superhydrophobic coating for enhancing self-cleaning performance

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Bioinspired durable superhydrophobic materials with antiwear property fabricated from quartz sands and organosilane

Advances in Bioinspired Superhydrophobic Surfaces Made from Silicones: Fabrication and Application

Superhydrophobic materials with good oil/water separation and self-cleaning property

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

A simple method for the fabrication of silica-based superhydrophobic surfaces

Preparation of an Organosilicon‐Modified Micro‐Nano Symbiotic Superhydrophobic Surface by a One‐Step Spray Method

Fabrication of mechanically robust superhydrophobic surfaces based on silica micro-nanoparticles and polydimethylsiloxane

A Versatile and Efficient Method to Fabricate Recyclable Superhydrophobic Composites Based on Brucite and Organosilane

Silica Coating with Well-Defined Micro-Nano Hierarchy for Universal and Stable Surface Superhydrophobicity

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Preparation of superhydrophobic cauliflower-like silica nanospheres with tunable water adhesion

Fabrication of Mechanical Durable Polysiloxane Superhydrophobic Materials

Preparation of transparent and robust superhydrophobic surfaces for self-cleaning applications

A Versatile and Efficient Method to Fabricate Durable Superhydrophobic Surfaces on Wood, Lignocellulosic Fiber, Glass, and Metal Substrates

Preparation of superhydrophobic poly(methyl methacrylate)-silicon dioxide nanocomposite films

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Design and Preparation of Hydrophobic Silica Particles and Study on Modified Epoxy Resin

Preparation and Characterization of Super-Hydrophobic Surface Through Particle Deposition by Vacuum Cold Spray