Abstract:The effect of both the Fe : Ni ratio (5 to 1 : 1) and the relative Lewis acidity of a metal oxide support on catalytic activity, selectivity and stability was investigated in the CO2 mediated oxidative dehydrogenation of ethane (CO2-ODH). To avoid effects of varying pore sizes, shapes and volumes of the supports, chromia and zirconia overlayers were coated onto a common γ-Al2O3 carrier (CrOx@Al2O3 and ZrOx@Al2O3). Separately, oxidic FexNiy alloy precursor nanoparticles were prepared using a nonaqueous surfactant-free method and deposited by sonication onto the carrier. In comparison to previous studies in the field, this synthesis technique yields closely associated iron and nickel increasing the chances for alloy formation. During reduction, a mixture of a bcc and a fcc alloy phase was formed, with the content of bcc increasing with increasing iron content as predicted by the bulk phase diagram. Upon exposure to carbon dioxide at elevated temperatures, the bcc metallic phase is selectively oxidised to an inverse spinel structure via the dissociation of CO2. When exposed to CO2-ODH conditions, the bare ZrOx@Al2O3 support shows no activity. The presence of FeNi phases increases the conversion of ethane and CO2 marginally (<2%) but forms ethylene at high selectivity (SC2H4 > 80%). The CrOx@Al2O3 support shows some initial activity (XC2H6 < 5%) at very high ethylene selectivity (SC2H4 > 90%) but deactivates with time on stream. Comparison of the ethane and carbon dioxide conversions suggests that direct dehydrogenation rather than the oxidative pathway is taking place. When FeNi particles with the highest Fe content are added, the ethane conversion behavior hardly changes, but the CO2 conversion is increased now supporting the stoichiometric CO2-ODH reaction (SC2H4 > 95%). It is therefore evident that a tandem catalyst system between a reducible oxide carrier and the FeNi species is required. Increasing the Ni content results in an increase in activity and stability while changing the dominant reaction pathway to a combination of dry reforming, CO2-ODH and possibly the reverse Boudouard reaction, with the latter countering catalyst deactivation through carbon deposition.

Successive reduction-oxidation activity of FeOx/TiO2 for dehydrogenation of ethane and subsequent CO2 activation

Chemical looping oxidative dehydrogenation of ethane over Fe-Co/HZSM-5 redox catalyst

Biomass based oxygenates modified Fe-Mn oxide with improved surface lattice oxygen mobility for the chemical looping-oxidative dehydrogenation of ethane to ethylene

Regulating lattice oxygen mobility of FeO redox catalyst via W-doping for enhanced chemical looping oxidative dehydrogenation of ethane

Size-controlled Synthesis of Hematite -Fe2o3 Nanodisks Closed with (0001) Basal Facets and {11-20} Side Facets and Their Catalytic Performance for CO2 Hydrogenation

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Influence of Reduction Conditions on Structure of Fe/Tio2 Catalyst for Hydrogenation of Carbon Dioxide

Electrochemical Activation of Surface Oxygen for Efficient Oxidative Dehydrogenation Reaction at Elevated Temperatures

Supported FexNiy catalysts for the co-activation of CO2 and small alkanes

Surface Properties and Reactivity of Iron-Doped Titanium Oxides Catalysts in Oxidative Dehydrogenation of Ethylbenzene with CO2

Stepwise Reduction Kinetics of Iron-Based Oxygen Carriers by CO/CO 2 Mixture Gases for Chemical Looping Hydrogen Generation

Dual Ni active sites mediated by In to separate ethane activation and oxidation for enhanced ethene production via chemical looping scheme

Coupling acid catalysis and selective oxidation over MoO3-Fe2O3 for chemical looping oxidative dehydrogenation of propane

Controlled reaction depth by metal (M=Fe, Ni, Mn and Ti) doped ceria in selective oxidation of ethane with carbon dioxide

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

Engineering multi-component 3DOM FeVCrOx catalysts with high oxygen mobility for the oxidative dehydrogenation of 1-butene with CO2

Enhancing the synergism of Fe3O4 and Fe5C2 to improve the process of CO2 hydrogenation to olefines

Unveiling the Role of Active Oxygen Species in Oxidative Dehydrogenation of Ethane with CO2 over NiFe/CeO2

Highly efficient and stable ordered mesoporous Ti-Al composite oxide catalyst for oxidative dehydrogenation of ethylbenzene to styrene with CO2

Unraveling the Surface State Evolution of IrO 2 in Ethane Chemical Looping Oxidative Dehydrogenation

Facilitating CO 2 dissociation via Fe doping on supported vanadium oxides for intensified oxidative dehydrogenation of propane