Abstract:In the scanning magnetic domain by using the conventional magnetic force microscopy (MFM), a laser beam reflection is used to detect the static magnetic force between probe and sample. Therefore, for the MFM, it is a challenge to directly detect the dynamic magnetic force between probe and sample under an external alternating-current (AC) magnetic field. In this study, it is proved that in an alternating magnetic force microscopy (A-MFM) a sensitive Co-GdOx superparamagnetic probe can be usedto detect the dynamic magnetic force under an external AC magnetic field (frequency ωm). In the present method, the magnetization of Co-GdOx probe is modulated by an external AC magnetic field. Collecting ωm and 2ωm signals by using the combination of phase-locked loop (PLL) and lock in amplifiers can accurately represent the static (DC, which stands for direct current) magnetic field areas (the external AC magnetic field has no effect on the magnetized status of the sample) and dynamic (AC) magnetic field areas (the external AC magnetic field changes the magnetized status of the sample) of an anisotropic Sr ferrite sintered magnet at the same time, respectively. The Sr ferrite sample is a single-domain-type magnet where magnetization mainly changes via magnetic rotation. The A-MFM method can measure the strength and identify the polarities of the static magnetic field of sample with a DC demagnetized state. By modifying the traditional tapping-lift mode into a tapping-multiply lift mode, the A-MFM by using superparamagnetic tips can measure the static and dynamic magnetic field distribution in three-dimensional (3D) space. It is proved that the static and dynamic magnetic field as a function of the distance z between probe and sample are both expressed as Hz(z) = Hz(0)·exp(–kz). The experimental data are consistent with the previous theoretical calculations. The A-MFM can be used to study the dynamic magnetization process and to evaluate the magnetic homogeneity (microstructural homogeneity) of magnetic materials.

Multisensor Magnetic Scanning Microscope for Remanent Magnetic Field Measurements

A Broadband NMR Magnetometer System with Field Searching and Automatic Tuning Function

Magnetic microscopy using Hall effect sensors biased with pulsed currents

Scanning SQUID Microscope with an In-Situ Magnetization/demagnetization Field for Geological Samples

A High Field Magnetic Force Microscope with Large Area Searching Capability

A High-Sensitivity Magnetic Moment Measurement System for Large Samples Based on a Single-Axis Atomic Magnetometer

Advance of the Micro-Magnetometer Memsmag Research

High Isolation, Double-Clamped, Magnetoelectric Microelectromechanical Resonator Magnetometer

Compact Magnetic Force Microscope (MFM) System in a 12 T Cryogen-Free Superconducting Magnet

Design of advanced micro-magnetic sensors for various applications

Alternating Magnetic Force Microscopy: Simultaneous Observation of Static and Dynamic Magnetic Field in Three-Dimensional Space

The EDMR Microscope - Combining Conductive Atomic Force Microscopy with Electrically Detected Magnetic Resonance

A Scanning Hall Probe Microscope for high resolution, large area, variable height Magnetic Field Imaging

Study on Micro Fluxgate Magnetic Sensor

Coupling nanoscopic tomography and micromagnetic modelling to assess the stability of geomagnetic recorders

Magnetic Recording Method (MRM) for Nondestructive Evaluation of Ferromagnetic Materials

The Design and Test of an STM-MFM Microscope Combo for Use in a $\phi$52 Mm 18/20 T Superconducting Magnet

Towards 3D Magnetic Force Microscopy

Embedded printed magnetic needle probes sensor for the real-time control of the local induction state through a laminated magnetic core

Magnetoelastic Microsensors for Environmental Monitoring

Development and Application of a Portable 3-Axis Transient Magnetic Field Measuring System Based on AMR Sensor