Abstract:With China's increasing dependence on foreign wood, African wood has gradually become a potential imported species, but its use is seriously affected by problems such as unpleasant odors. In this study, we investigate the effect of heat treatment medium on odor-causing VOCs, decomposition of structural polymers, Modulus of Rupture (MOR) and Modulus of Elasticity (MOE) of hardwood. Samples of "Afrormosia" and "Newtonia" wood were heated under air and palm oil for two hours at 160 °C, 180 °C, and 200 °C, respectively. Then, the nature of the odor of each VOC emitted by the wood before and after heat treatment was identified using the GCMS method. The decomposition of hemicelluloses, cellulose and lignin in wood samples was examined using a ThermoGravimetric Analyzer coupled to Fourier Transform InfraRed spectrometry (TGA-FTIR). The 3-point bending test was used to evaluate MOR and MOE. The results indicate that the main VOCs responsible for unpleasant smells are acetic acid and hexanal; the reduction in hexanal emissions after heat treatment is mainly due to the treatment temperature, while the reduction in acetic acid emissions depends on the heat treatment medium and is due to the chemical interactions between palm oil and acetic acid; thus, the heat treatment under palm oil reduces the percentage area of VOCs with unpleasant odors in Afrormosia and Newtonia wood better than the heat treatment under air. Based on TGA-3D FTIR analysis and mechanical results, the reduction in MOR is greater in heat treatment under air because the said treatment induces a greater loss of woody matter, which was characterized by higher H2O and CO emissions during heat treatment of wood under palm oil than during heat treatment of wood under air. On the other hand, palm oil more than air, promotes lignin deacetylation, which is characterized by the fact that the 1050 cm-1 wavelength peak was far higher in samples treated with palm oil than in those treated under air; and this might explain why heat treatment under palm oil reduces MOE more than heat treatment under air.

Effect of extended outdoor exposure on surface quality and mechanical properties of Malaysian hardwood species

Durability of Superheated Steam-Treated Light Red Meranti (Shorea spp.) and Kedondong (Canarium spp.) Wood against White Rot Fungus and Subterranean Termite

Surface Characteristics and Artificial Weathering Resistance of Oil-Based Coatings on the Chemically and Thermally Modified Short-Rotation Teak Wood

Surface characterization and paint bonding quality on chemically and thermally modified short rotation teak wood

Improving the Technical Characteristics of Untreated and Heat-Treated Ayous Wood against Accelerating Ageing by Testing Two Application Modalities of an Innovative Polyurethane Coating for Outdoor Uses

Influence of nanoparticles and olive leaf extract in polyacrylate coating on the weathering performance of thermally modified wood

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

A Study on the Surface Responses and Degradation Mechanisms of Epoxy-Amine Coating Subjected to UV Accelerated Weathering and Hygrothermal Ageing Using ToF-SIMS and FTIR Analysis

Performance of Thermally Modified Spruce Timber in Outdoor Above-Ground Conditions: Checking, Dynamic Stiffness and Static Bending Properties

Weathering performance of thermally modified wood coated with polyacrylate containing olive leaf extract as a bio-based additive

Mechanical properties and biological durability in soil contact of chemically modified wood treated in an open or in a closed system using glycerol/maleic anhydride systems

Properties Enhancement of Oil Palm Trunk Plywood against Decay and Termite for Marine Applications

Effects of different heat treatment media on odorous constituents, chemical decomposition and mechanical properties of two hardwoods

Improved weathering performance and wettability of wood protected by CeO2 coating deposited onto the surface

Influence of Traditional Wood Surface Modification Methods on Changes in Aesthetic and Resistance Properties

Dynamic Mechanical Analysis of Bio-Based and Synthetic Petroleum Based Polymer Foams with Powder Type Organic Filler at Prolonged Ultra-Violet Exposure

Effect of natural weathering on optical properties of transparent wood composite

Wood Surface Finishing with Transparent Lacquers Intended for Indoor Use, and the Colour Resistance of These Surfaces during Accelerated Aging

Effects of the Surface Roughness of Six Wood Species for Furniture Production on the Wettability and Bonding Quality of Coating

Success factors of wood veneer as an overlay material for panel-based furniture manufacturing in Malaysia