Abstract:In hydrodynamic lubrication problems, the presence of step structures on the surface can cause discontinuities in the film thickness. This article proposes two models for solving the two-dimensional Reynolds equation with film thickness discontinuity using the finite difference method (FDM). In model I, the film thickness variable is defined at the center of the mesh grids, allowing the Reynolds equation to be reformulated in a weak form that eliminates the singularity of film thickness discontinuity and satisfies the flow continuity condition at the film thickness discontinuity region. By considering the step boundary on the surface as the interface, model II is constructed based on the immersed interface method, turning the hydrodynamic lubrication problem into a classical interface problem. The jump conditions across the interface are derived in accordance with the continuous flow requirement. A phase-field function is adopted to describe the interface on the uniform rectangular mesh grids. Numerical experiments are conducted to assess the accuracy and capabilities of the two proposed models for analyzing a step-dimple-textured sealing. The results demonstrate that both modified FDM models can effectively address the thickness discontinuity issue. Model II achieves second-order accuracy for the pressure distribution when dealing with curved interfaces based on Cartesian grids, whereas model I demonstrates first-order accuracy. Both the proposed models exhibit superior accuracy compared to the traditional second-order central FDM when dealing with curved interfaces. Moreover, the performance of model II is further assessed by simulating lubrication problems with complex groove shapes, and the results indicate its flexibility in addressing thickness discontinuity problems with complex curve interface.

Efficient solution method for the Reynolds equation with Herschel–Bulkley fluids

Close-contact Melting of Shear-Thinning Fluids

Modified Reynolds Equation for Non-Newtonian Fluid with Rheological Model in Frequency Domain

Comparison of Lubrication Approximation and Navier-Stokes Solutions for Dam-Break Flows in Thin Films

A GENERALIZED REYNOLDS EQUATION BASED ON NON-NEWTONIAN FLOW IN LUBRICATION MECHANICS

Modified Finite Difference Methods for Reynold Equation with Film Thickness Discontinuity

Solution Agreement Between Dry Contacts and Lubrication System at Ultra-Low Speed

A thin-film equation for a viscoelastic fluid, and its application to the Landau-Levich problem

An integral equation method for the simulation of doubly-periodic suspensions of rigid bodies in a shearing viscous flow

A Dynamic Rheological Model for Thin-Film Lubrication

A Film Thickness Correction Formula for Double-Newtonian Shear-Thinning in Rolling EHL Circular Contacts

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

Soft lubrication of model shear-thinning fluids

Mixed EHL Problems: an Efficient Solution to the Fluid–Solid Coupling Problem with Consideration of Elastic Deformation and Cavitation

Viscosity-model-independent generalized Reynolds number for laminar flow of shear-thinning and viscoplastic fluids

A Mixed Lubrication Model with Consideration of Starvation and Interasperity Cavitations

Numerical Solution of Reynolds' Equation for Ultra-Thin Gas Film Lubrication at the Head/disk Interface

A Simplified One-Dimensional Thermal Model for Journal Bearings

A Sparse Matrix-Based Method for Rapid Solving the Reynolds Equation

Iteration Framework for Solving Mixed Lubrication Computation Problems

Flow Analysis of Field-Controllable, Electro- and Magneto-Rheological Fluids Using Herschel-Bulkley Model