Abstract:Background: Ethanol production through fermentation of gas mixtures containing CO, CO2 and H2 has just started operating at commercial scale. However, quantitative schemes for understanding and predicting productivities, yields, mass transfer rates, gas flow profiles and detailed energy requirements have been lacking in literature; such are invaluable tools for process improvements and better systems design. The present study describes the construction of a hybrid model for simulating ethanol production inside a 700 m3 bubble column bioreactor fed with gas of two possible compositions, i.e., pure CO and a 3:1 mixture of H2 and CO2. Results: Estimations made using the thermodynamics-based black-box model of microbial reactions on substrate threshold concentrations, biomass yields, as well as CO and H2 maximum specific uptake rates agreed reasonably well with data and observations reported in literature. According to the bioreactor simulation, there is a strong dependency of process performance on mass transfer rates. When mass transfer coefficients were estimated using a model developed from oxygen transfer to water, ethanol productivity reached 5.1 g L-1 h-1; when the H2/CO2 mixture is fed to the bioreactor, productivity of CO fermentation was 19% lower. Gas utilization reached 23 and 17% for H2/CO2 and CO fermentations, respectively. If mass transfer coefficients were 100% higher than those estimated, ethanol productivity and gas utilization may reach 9.4 g L-1 h-1 and 38% when feeding the H2/CO2 mixture at the same process conditions. The largest energetic requirements for a complete manufacturing plant were identified for gas compression and ethanol distillation, being higher for CO fermentation due to the production of CO2. Conclusions: The thermodynamics-based black-box model of microbial reactions may be used to quantitatively assess and consolidate the diversity of reported data on CO, CO2 and H2 threshold concentrations, biomass yields, maximum substrate uptake rates, and half-saturation constants for CO and H2 for syngas fermentations by acetogenic bacteria. The maximization of ethanol productivity in the bioreactor may come with a cost: low gas utilization. Exploiting the model flexibility, multi-objective optimizations of bioreactor performance might reveal how process conditions and configurations could be adjusted to guide further process development.

On a multi-fractional model for biogas production for a cellulose-based substrate

Examining a Pretty Simple and Low Cost Method for Modeling of Biogas Production from Biodegradable Solids

Fractional calculus as a generalized kinetic model for biochemical methane potential tests

Modeling and Simulation of Biogas Production in Full Scale with Time Series Analysis

Mathematical Modeling and Computational Simulation Applied to the Study of Glycerol and/or Molasses Anaerobic Co-Digestion Processes

Application of anaerobic digestion model No. 1 for simulating fermentation of maize silage, pig manure, cattle manure and digestate in the full-scale biogas plant

Application of Anaerobic Digestion Model No. 1 for modeling anaerobic digestion of vegetable crop residues: Fractionation of crystalline cellulose

Study on Anaerobic Digestion of Cellulosic Waste and Its Dynamics Model

Modeling ethanol production through gas fermentation: a biothermodynamics and mass transfer-based hybrid model for microbial growth in a large-scale bubble column bioreactor

Dynamic modeling of syngas fermentation in a continuous stirred‐tank reactor: Multi‐response parameter estimation and process optimization

Kinetic Modeling of Anaerobic Co-Digestion Of Plant Solid Waste with Sewage Sludge: Synergistic Influences of Total Solids and Substrate Particle Size in Biogas Generation

Model Development for Anaerobic Digestion of Cellulose under Simulated Landfill Conditions

Application of a simplified ADM1 for full-scale anaerobic co-digestion of cattle slurry and grass silage: assessment of input variability

Modeling and forecasting biogas production from anaerobic digestion process for sustainable resource energy recovery

Kinetics assessment and modeling of biogas production by anaerobic digestion of food wastes and acclimated sewage sludge

Mathematical model for enzymatic hydrolysis and fermentation of cellulose by Trichoderma

Study on Fermentation Kinetics of a Filamentous Fungi Producing Cellulase with Facultative Anerobic Liquid-State Type

Modeling the Kinetics of Complex Systems: Enzymatic Hydrolysis of Lignocellulosic Substrates

Analysis of biogas production from sewage sludge combining BMP experimental assays and the ADM1 model

Heterogeneity of Lignocellulose Must Be Considered for Kinetic Study: A Case on Formic Acid Fractionation of Sugarcane Bagasse with Different Pseudo-Homogeneous Kinetic Models

Kinetic modeling and synergistic effects of anaerobic co-digestion of bovine ruminal waste and brewery spent grain