Abstract:Low temperature SCR has been a promising technology due to the diverse load in coal-fired plants. However, ammonia escape problem could be more serious at low temperature on account of the condensation of NH4HSO4, resulting in deactivation of SCR catalyst and equipment corrosion. NH3-SCO technology could oxidize slip ammonia to harmless N2. Hence, it is important to develop a novel catalyst with high SCR and SCO efficiency at low temperature to remove NOx and slip NH3 and achieve the stable operation of SCR system. In this work, a combined sol-gel and impregnation method was used to synthetize different Aga−Mn/Ce-Ti (a = 2%, 5%, 8%) catalysts and applied in NOx and slip NH3 removal at low temperature. The activity measurement confirmed that Ag5-Mn/Ce-Ti catalyst exhibited an excellent low-temperature performance. At 150–300 °C, its NO conversion was 100%, NH3 conversion was above 95% and N2 selectivity was more than 90%. Moreover, considering the oxidation of slip ammonia, Ag5-Mn/Ce-Ti catalyst also exhibited above 90% NH3 conversion at 200–350 °C in the absence of NO. The catalytic performance could also be kept at a high level under the existence of SO2 and H2O. The characteristic results revealed that Ag and Mn modification could not apparently change the phase structure and could decrease the BET area to some extent. In addition, Ag-Mn/Ce-Ti catalyst possessed stronger and more surface acidic sites and contributed to better NH3 adsorption capacity. Besides, there was more chemisorbed oxygen on Ag-Mn/Ce-Ti catalyst resulting from the interactions among Ag, Mn and Ce oxides, which was responsible for its better redox property.

A review of Mn-based catalysts for low-temperature NH 3 -SCR: NO x removal and H 2 O/SO 2 resistance

A Review of Mn-Based Catalysts for Abating NOx and CO in Low-Temperature Flue Gas: Performance and Mechanisms

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study

SO 2 and H 2 O Poisoning Resistance of Manganese Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NO X

Sulfur and Water Resistance of Carbon-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review

Reactions and mechanisms of low-temperature selective catalytic reduction of NOXby NH3over manganese oxide-based catalysts

Mn-Based Catalysts in the Selective Reduction of NOx with CO: Current Status, Existing Challenges, and Future Perspectives

Low-Temperature NH3-SCR Performance and In Situ DRIFTS Study on Zeolite X-Supported Different Crystal Phases of MnO2 Catalysts

Challenges and opportunities for manganese oxides in low-temperature selective catalytic reduction of NO<sub>x</sub> with NH<sub>3</sub>: H<sub>2</sub>O resistance ability

The Latest Research Progress of NH3-SCR in the SO2 Resistance of the Catalyst in Low Temperatures for Selective Catalytic Reduction of NOx

Ultralow-Temperature NOx Reduction over SmMn2O5 Mullite Catalysts Via Modulating the Superficial Dual-Functional Active Sites

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Effect of Nb‐doping on the MnFeOx catalyst for NH3‐SCR reaction at low‐temperature

Mn/SAPO-34 As an Efficient Catalyst for the Low-Temperature Selective Catalytic Reduction of NOx with NH3

Superior Oxidative Dehydrogenation Performance toward NH<sub>3</sub> Determines the Excellent Low-Temperature NH<sub>3</sub>-SCR Activity of Mn-Based Catalysts

Excellent low temperature NH3-SCR and NH3-SCO performance over Ag-Mn/Ce-Ti catalyst: Evaluation and characterization

Low-temperature Selective Catalytic Reduction of NOx with NH3 over Metal Oxide and Zeolite Catalysts—a Review

Unveiling the SO 2 Resistance Mechanism of a Nanostructured SiO 2 ( x )@Mn Catalyst for Low-Temperature NH 3 -SCR of NO

Mechanistic Investigation of the Enhanced SO2 Resistance of Co-modified MnOx Catalyst for the Selective Catalytic Reduction of NOx by NH3

Abundant Oxygen Vacancies Induced by the Mechanochemical Process Boost the Low-Temperature Catalytic Performance of MnO2 in NH3-SCR