Abstract:To improve printing fidelity, reducing the slice thickness to eliminate the staircase effect is of great importance for digital light processing (DLP) technology. However, using a thinner slice printing model leads to a longer total printing time in the conventional DLP approach, which significantly reduces printing efficiency. In this work, a tunable pre-curing DLP approach was developed where the relationship between the forming layer thickness and ultraviolet (UV) exposure time is theoretically analyzed, and the curing process of photo-curable solutions is divided into two sub-processes: pre-curing and further curing. In the pre-curing process, the photo-curable solution is initially pre-cured and kept at the pre-gelled state due to continuous UV exposure during subsequent DLP printing. Then, the pre-cured photo-curable solution is quickly cured to form a designed thickness in each printing cycle. Also, the UV absorbing agent is added to the photo-curable hydrogel solutions to regulate the pre-curing process. Using a 10 μm slice for DLP printing, the total printing time of the tunable pre-curing DLP is approximately 5.6% of the conventional DLP, and the staircase effect on the surface is significantly eliminated using 10 μm slice tunable pre-curing DLP approach, which leads to a better printing fidelity. Thus, both printing fidelity and efficiency are significantly and simultaneously improved by the tunable pre-curing DLP approach. Moreover, the reduction of UV exposure time and slice thickness is beneficial for cell viability during DLP bioprinting of thick bulk structures, which is demonstrated by the printing of PC12 cell-laden gelatin methacrylate (GelMA) bioinks. Using the tunable pre-curing DLP approach, the PC12 cells achieved higher cell viability (90.2 ± 6.1%) and better cell morphology than the conventional DLP approach (54.5 ± 4.8%). The tunable pre-curing DLP approach provides a promising alternative to extend the application of DLP printing greatly.

Photocurable Foam for Three-Dimensional-Printed Porous Structures

Continuous Production of Multifunctional Porous Materials Via Photo-Crosslinking of Ice Templated Emulsions

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

A promising approach to 3D printing of metal foam with defined porosity

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

Acoustic-assisted DLP 3D Printing Process for Carbon Nanofiber Reinforced Honeycomb Structures

Structure-Processing-Property Relationships of 3D Printed Porous Polymeric Materials

Rapid Open‐Air Digital Light 3D Printing of Thermoplastic Polymer

Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology

Direct Ink Write 3D Printing of Fully Dense and Functionally Graded Liquid Metal Elastomer Foams (Adv. Funct. Mater. 46/2024)

3D Printable Ultra‐Highly Porous and Mechanically Strong Foam Materials for Multiple Applications

3D printing boehmite gel foams into lightweight porous ceramics with hierarchical pore structure

In Situ Foam 3D Printing of Microcellular Structures Using Material Extrusion Additive Manufacturing.

Coupling selective laser sintering and supercritical CO 2 foaming for 3D printed porous polyvinylidene fluoride with improved piezoelectric performance

Recent Innovations in Interfacial Strategies for DLP 3D Printing Process Optimization

3D printed multifunctional hierarchical structured cellular silicones with ultraelasticity, extreme load-bearing capacity, shape morphing and sensing properties

Reconfigurable Polymer Networks for Digital Light Processing 3D Printing

Laser‐Directed Foaming of Hydroplastic Polyelectrolyte Films toward Tunable Structures and Programmable Routes

Porous Polymer Structures with Tunable Mechanical Properties Using a Water Emulsion Ink

Preparation and Properties of Functional Materials Based on Digital Light Processing 3D Printing

Digital Light Processing 3D printing for biological applications of polydimethylsiloxane-based microfluidics