Abstract:Summary Creating sufficient and sustained fracture conductivity contributes directly to the success of acid-fracturing treatments. The permeability and mineralogy distributions of formation rocks play significant roles in creating nonuniformly etched surfaces that can withstand high closure stress. Previous studies showed that, depending on the properties of formation rock and acidizing conditions (acid selection, formation temperature, injection rate, and contact time), a wide range of etching patterns (roughness, uniform, channeling) could be created that can dictate the resultant fracture conductivity. Insoluble minerals and their distribution can completely change the outcomes of acid-fracturing treatments. However, most experimental studies use homogeneous rock samples such as Indiana limestone that do not represent the highly heterogeneous features of carbonate rocks. This work studies the effect of heterogeneity and, more importantly, the distribution of insoluble rock on acid-fracture conductivity. In this research, we conducted acid-fracturing experiments using both homogeneous Indiana limestone samples and heterogeneous carbonate rock samples. The Indiana limestone tests served as a baseline. The highly heterogeneous carbonate rock samples contain several types of insoluble minerals such as quartz and various types of clays along sealed natural fractures. These minerals are distributed in the form of streaks correlated against the flow direction, or as smaller nodules. After acidizing the rock samples, these minerals acted as pillars that significantly reduced conductivity-decline rate at high closure stresses. Both X-ray diffraction (XRD) and X-ray fluorescence (XRF) tests were performed to pinpoint the type and location of different minerals on the fracture surfaces. A surface profilometer was also used to correlate conductivity as a function of mineralogy distribution by comparing the surface scans from after the acidizing test to the scans after the conductivity test. Theoretical models considering geostatistical correlation parameters were used to match and understand the experimental results. Results of our study showed that insoluble minerals with higher-strength mechanical properties were not crushed at high-closure stress, resulting in a less-steep conductivity decline with an increasing closure stress. If the acid etching creates enough conductivity, the rock sample can sustain a higher closure stress with a much lower decline rate compared with Indiana limestone samples. Fracture surfaces with insoluble mineral streaks correlated against the flow direction offer the benefit of being able to maintain conductivity at high closure stress, but not necessarily high initial conductivity. Using a fracture-conductivity model with correlation length, we matched the fracture-conductivity behavior for the heterogeneous samples. Fracture surfaces with mineral streaks correlated with the flow direction could increase acid-fracturing conductivity significantly as compared to the case when the streak is correlated against the flow direction. The results of the study show that fracture conductivity can be optimized by taking advantage of the distribution of insoluble minerals along the fracture surface and demonstrate important considerations to make the acid-fracturing treatment successful.

A multi-factor coupled acid-etching fracture conductivity prediction model study

A method for predicting fracture conductivity based on three‐dimensional spatial morphology features

Experimental study and modeling of final fracture conductivity during acid fracturing

Evaluating the Effects of Acid Fracture Etching Patterns on Conductivity Estimation Using Machine Learning Techniques

Development of Acid Fracturing Model for Naturally Fractured Reservoirs

Simulation Study of Acid Fracturing Initiation with Consideration of Rock Mechanics Parameter Variations

Acid-Etched Fracture Conductivity with In Situ-Generated Acid in Ultra-Deep, High-Temperature Carbonate Reservoirs

Effect of Mixed Mineralogy on Etching Profile and Conductivity in Acid Fracturing in Naturally Fractured Carbonate Reservoirs

Does the Selection of the Fracture Model Affect the Calculation of the Permeability of a Rock Mass?

Comprehensive Investigation of Factors Affecting Acid Fracture Propagation with Natural Fracture

Effects of Heterogeneity in Mineralogy Distribution on Acid-Fracturing Efficiency

Influences of real-time acid-rock reaction heat on etched fracture dimensions during acid fracturing of carbonate reservoirs and field applications

A phase-field model of hydraulic fractures in acidized porous media with strain-softening properties

Simulation of volumetric acid fracturing fracture in low permeability carbonate rock

Influence of Rock Mineralogy on Reactive Fracture Evolution in Carbonate-Rich Caprocks

Study on Damage Statistical Constitutive Model of Triaxial Compression of Acid-Etched Rock under Coupling Effect of Temperature and Confining Pressure

Electrical properties and modeling of single-fractured rocks under thermal-hydro-mechanical coupling

Reactive Transport Simulation of Fracture Channelization and Transmissivity Evolution

A comparative study of fracture conductivity prediction using ensemble methods in the acid fracturing treatment in oil wells

Predicting The Electrical Conductivity Of Dual-Porosity Media With Fractal Theory

Modeling of fracture geometry alteration and fracture flow evolution under geostress and water-rock interaction