Abstract:The application of different types of microwave resonators for sensing cracks in metallic structures has been subject of many studies. While most studies have been focused on improving the sensitivity of planar crack sensors, the theoretical foundation of the topic has not been treated in much detail. The major objective of this study is to perform an exhaustive study of the principles and theoretical foundations for crack sensing based on planar microwave resonators, especially defective ground structures (DGS) including complementary split ring resonators (CSRRs). The analysis is carried out from the equivalent circuit model as well as the electromagnetic (EM) field perspectives, and guidelines for the design of crack sensors with high sensitivity are developed. Numerical and experimental validation of the provided theoretical analysis is another aim of this article. With this aim, the developed guidelines are used to design a crack sensor based on a single-ring CSRR. It is shown that the sensitivity of the proposed sensor is almost three times higher than the sensitivity of a conventional double-ring CSRR. Moreover, it is demonstrated that folded dumbbell-shape DGS resonators can be used to achieve even higher sensitivities. The CSRR-based crack sensors presented in this study and other studies available in the literature are only sensitive to cracks with a specific orientation. To address this limitation, a modified version of the DGS is proposed to sense cracks with arbitrary orientations at the cost of lower sensitivity. The performance of all the presented sensors is validated through EM simulation, equivalent circuit model extraction, and measurement of the fabricated prototypes.

Sensitivity Enhancement of Microwave Split-Ring-Resonator Sensors

Solid materials characterization using split ring resonators enclosed by power divider

Differential Microwave Microfluidic Sensor Based on Microstrip Complementary Split-Ring Resonator (MCSRR) Structure

A Microwave Differential Dielectric Sensor Based on Mode Splitting of Coupled Resonators

SYMMETRICAL SPLIT RING RESONATOR METAMATERIALS FOR MICROWAVE BIOSENSOR

Optical Sensors Based on Cascaded Micro-Ring Resonators with Thermo-Optical Tuning

Techniques to Improve the Performance of Planar Microwave Sensors: A Review and Recent Developments

Planar Microwave Sensor with High Sensitivity for Material Characterization Based on Square Split Ring Resonator (SSRR) for Solid and Liquid

Modeling of a Metamaterial Biosensor Based on Split Ring Resonators for Cancer Cells Detection

Novel High Performance Fano Resonance Sensor with Circular Split Ring Resonance

Design of novel highly sensitive sensors for crack detection in metal surfaces: theoretical foundation and experimental validation

Highly-Sensitive Silicon-On-Insulator Sensor Based on Two Cascaded Micro-Ring Resonators with Vernier Effect

Microwave Transmission Behavior of the Single Dissymmetrical Hexagonal Split-Ring Resonators

Highly sensitive miniaturized labyrinth shape circular split ring resonator (LC-SRR) based microwave sensor for low permittivity characterization applications

A Miniaturized and Highly Sensitive Microwave Sensor Based on CSRR for Characterization of Liquid Materials

Magnetic Excitation of High-Q Resonance with Split-Ring Resonators

Terahertz Electromagnetic Signal Enhancement in Split Ring Resonators Featuring Waveguide Modes.

An Asymmetric Split Ring Resonator For Refractive-Based-Sensor Applications At Terahertz Frequencies

Equivalent circuit of a planar microwave liquid sensor based on metamaterial complementary split ring resonator

High-Sensitivity and Wide-Range Optical Sensor Based on Three Cascaded Ring Resonators

Enhanced accuracy and high sensitivity in dielectric characterization through a compact and miniaturized metamaterial inspired microwave sensor