Ab-initio study of the vibrational properties of Mg(AlH$_4$)$_2$

Eleonora Spanøand Marco Bernasconi

DOI: https://doi.org/10.48550/arXiv.cond-mat/0410759

2004-10-29

Abstract:Based on Density Functional Theory and Density Functional Perturbation Theory we have studied the thermodynamical and vibrational properties of Mg(AlH$_4$)$_2$.

Materials Science

What problem does this paper attempt to address?

Ab Initio Calculation of Structure and Thermodynamic Properties of Zintl Aluminide SrAl2

Zhi-Jian Fu,Li-Jun Jia,Ji-Hong Xia,Ke Tang,Zhao-Hong Li,Xiao-Wei Sun,Qi-Feng Chen

DOI: https://doi.org/10.1515/zna-2015-0250

2015-01-01

Abstract:The structural and thermodynamic properties of the orthorhombic and cubic structure SrAl2 at pressure and temperature are investigated by using the ab initio plane-wave pseudopotential density functional theory methodwithin the generalised gradient approximation (GGA). The calculated lattice parameters are in agreement with the available experimental data and other theoretical results. The phase transition predicted takes place at 0.5 GPa from the orthorhombic to the cubic structure at zero temperature. The thermodynamic properties of the zinc-blende structure SrAl2 are calculated by the quasi-harmonic Debye model. The pressure-volume relationship and the variations inthe thermal expansion a are obtained systematically in the pressure and temperature ranges of 0-5 GPa and 0-500 K, respectively.
Ab initio study of magnesium alanate, Mg(AlH4)2

M. J. van Setten,G. A. de Wijs,V. A. Popa,G. Brocks

DOI: https://doi.org/10.1103/PhysRevB.72.073107

2005-05-25

Abstract:Magnesium alanate Mg(AlH4)2 has recently raised interest as a potential material for hydrogen storage. We apply ab initio calculations to characterize structural, electronic and energetic properties of Mg(AlH4)2. Density functional theory calculations within the generalized gradient approximation (GGA) are used to optimize the geometry and obtain the electronic structure. The latter is also studied by quasi-particle calculations at the GW level. Mg(AlH4)2 is a large band gap insulator with a fundamental band gap of 6.5 eV. The hydrogen atoms are bonded in AlH4 complexes, whose states dominate both the valence and the conduction bands. On the basis of total energies, the formation enthalpy of Mg(AlH4)2 with respect to bulk magnesium, bulk aluminum and hydrogen gas is 0.17 eV/H2 (at T = 0). Including corrections due to the zero point vibrations of the hydrogen atoms this number decreases to 0.10 eV/H2. The enthalpy of the dehydrogenation reaction Mg(AlH4)2 -> MgH2 +2Al+3H2(g) is close to zero, which impairs the potential usefulness of magnesium alanate as a hydrogen storage material.

Materials Science
Elastic and Thermodynamic Properties of Complex Mg-Al Intermetallic Compounds via Orbital-Free Density Functional Theory

Houlong L. Zhuang,Mohan Chen,Emily A. Carter

DOI: https://doi.org/10.1103/PhysRevApplied.5.064021

IF: 4.6

2016-01-01

Physical Review Applied

Abstract:Magnesium-aluminum (Mg-Al) alloys are important metal alloys with a wide range of engineering applications. We investigate the elastic and thermodynamic properties of Mg, Al, and four stoichiometric Mg-Al compounds including Mg17Al12, Mg13Al14, and Mg23Al30, and MgAl2 with orbital-free density-functional theory (OFDFT). We first calculate the lattice constants, zero-temperature formation energy, and independent elastic constants of these six materials and compare the results to those computed via Kohn-Sham DFT (KSDFT) benchmarks. We obtain excellent agreement between these two methods. Our calculated elastic constants of hexagonal close-packed Mg and face-centered-cubic Al are also consistent with available experimental data. We next compute their phonon spectra using the force constants extracted from the very fast OFDFT calculations, because such calculations are computationally challenging using KSDFT. This is especially the case for the Mg23Al30 compound, whose 3 x 3 x 3 supercell consists of 1431 atoms. We finally employ the quasiharmonic approximation to investigate temperature-dependent thermodynamic properties, including formation energies, heat capacities, and thermal expansion of the four Mg-Al intermetallic compounds. The calculated heat capacity and thermal expansion of both Mg and Al agree well with experimental data. We additionally find that Mg13Al14 and MgAl2 are both unstable, consistent with their absence from the equilibrium Mg-Al phase diagram. Our work demonstrates that OFDFT is an efficient and accurate quantum-mechanical computational tool for predicting elastic and thermodynamic properties of complicated Mg-Al alloys and also should be applicable to many other engineering alloys.
An Ab Initio Potential Energy Surface and Vibrational States of Mgh2(1(1)A ')

H Li,Dq Xie,H Guo

DOI: https://doi.org/10.1063/1.1777215

2004-01-01

Abstract:A three-dimensional global potential energy surface for the ground electronic state of MgH2 is constructed from more than 3000 ab initio points calculated using the internally contracted multireference configuration interaction method with the Davidson correction at the complete basis set limit. Low-lying vibrational energy levels of MgH2 and MgD2 are calculated using the Lanczos algorithm, and found to be in good agreement with known experimental band origins. The majority of the vibrational energy levels up to 8000 cm(-1) are assigned with normal mode quantum numbers. However, our results indicate a gradual transition from a normal mode regime for the stretching vibrations at low energies to a local mode regime near 7400 cm(-1), as evidenced by a decreasing energy gap between the (n(1),0,0) and (n(1)-1,0,1) vibrational states and bifurcation of the corresponding wave functions. (C) 2004 American Institute of Physics.
The Thermal Properties of Al–Mg–TM (tm=sc, Zr): Ab Initio Study

Bi-Yu Tang,Dong-Lin Li,Ping Chen,Jian-Xiong Yi,Li Wen,Li-Ming Peng,Wen-Jiang Ding

DOI: https://doi.org/10.1016/j.solidstatesciences.2010.02.006

IF: 3.752

2010-01-01

Solid State Sciences

Abstract:Ab initio density functional theory (OFT) and density function perturbation theory (DEPT) have been used to investigate the thermal properties of the Al-Mg-Sc, Al-Mg-Zr and Al-Mg-Sc-Zr alloys over a wide range of temperature and pressure. Phonon dispersions are obtained at equilibrium and strained configurations by DEPT. Using the quasiharmonic approximation (QHA) for the free energy, several physical quantities of interest such as thermal Gruneisen parameter, heat capacity at constant pressure and at constant volume, thermal expansion coefficient, entropy, adiabatic bulk modulus and isothermal bulk modulus as a function of temperature and pressure are calculated and discussed. The present results show that the thermal expansion coefficient of the Al-Mg-Sc-Zr is far lower than that of Al-Mg-Sc and Al-Mg-Zr, and the variation features in the adiabatic bulk modulus and isothermal bulk modulus for the Al-Mg-Sc-Zr are also very different from that of Al-Mg-Sc and Al-Mg-Zr. (C) 2010 Elsevier Masson SAS. All rights reserved.
Theoretical and Experimental Research of Hydrogen Solid Solution in Mg and Mg-Al System

Jinzhe Lyu,Roman R Elman,Leonid A Svyatkin,Viktor N Kudiiarov

DOI: https://doi.org/10.3390/ma15051667

2022-02-23

Abstract:The study of hydrogen storage properties of Mg-based thin films is of interest due to their unique composition, interface, crystallinity, and high potential for use in hydrogen-storage systems. Alloying Mg with Al leads to the destabilization of the magnesium hydride reducing the heat of reaction, increases the nucleation rate, and decreases the dehydriding temperature. The purpose of our study is to reveal the role of the aluminum atom addition in hydrogen adsorption and accumulation in the Mg-H solid solution. Ab initio calculations of aluminum and hydrogen binding energies in magnesium were carried out in the framework of density functional theory. Hydrogen distribution and accumulation in Mg and Mg-10%Al thin films were experimentally studied by the method of glow-discharge optical emission spectroscopy and using a hydrogen analyzer, respectively. It was found that a hydrogen distribution gradient is observed in the Mg-10%Al coating, with more hydrogen on the surface and less in the bulk. Moreover, the hydrogen concentration in the Mg-10%Al is lower compared to Mg. This can be explained by the lower hydrogen binding energy in the magnesium-aluminum system compared with pure magnesium.
Ab initiostudy on the thermal properties of the fcc Al3Mg and Al3Sc alloys

Dong-Lin Li,Ping Chen,Jian-Xiong Yi,Bi-Yu Tang,Li-Ming Peng,Wen-Jiang Ding

DOI: https://doi.org/10.1088/0022-3727/42/22/225407

2009-01-01

Abstract:Ab initio density functional theory (DFT) and density function perturbation theory (DFPT) have been used to investigate the thermal properties of the fcc Al3Mg and Al3Sc alloys over a wide range of pressure and temperature, in comparison with fcc Al. Phonon dispersions were obtained at equilibrium and strained configurations by density functional perturbation theory. Using the quasiharmonic approximation for the free energy, several thermal quantities of interest, such as the thermal Gruneisen parameter, heat capacity, thermal expansion coefficient and entropy, were calculated as a function of temperature and pressure, and the variation features of these quantities were discussed in detail. This investigation provides useful information for design and applications of technologically relevant Al-based alloys.
Electronic and Vibrational Properties of gamma-AlH3

Yan Wang,Jia-An Yan,M. Y. Chou

DOI: https://doi.org/10.48550/arXiv.0707.4604

2007-07-31

Materials Science

Abstract:Aluminum hydride (alane) AlH_3 is an important material in hydrogen storage applications. It is known that AlH_3 exists in multiply forms of polymorphs, where $\alpha$-AlH_3 is found to be the most stable with a hexagonal structure. Recent experimental studies on $\gamma$-AlH_3 reported an orthorhombic structure with a unique double-bridge bond between certain Al and H atoms. This was not found in $\alpha$-AlH_3 or other polymorphs. Using density functional theory, we have investigated the energetics, and the structural, electronic, and phonon vibrational properties for the newly reported $\gamma$-AlH_3 structure. The current calculation concludes that $\gamma$-AlH_3 is less stable than $\alpha$-AlH_3 by 2.1 KJ/mol. Interesting binding features associated with the unique geometry of $\gamma$-AlH3 are discussed from the calculated electronic properties and phonon vibrational modes. The binding of H-s with higher energy Al-p,d orbitals is enhanced within the double-bridge arrangement, giving rise to a higher electronic energy for the system. Distinguishable new features in the vibrational spectrum of $\gamma$-AlH_3 were attributed to the double-bridge and hexagonal-ring structures.
Ab-initio study of structural, elastic, electronic, optical and thermodynamic properties of MgV2O6

Md. Atikur Rahman,Md. Zahidur Rahaman,Md. Abdur Razzaque Sarker

DOI: https://doi.org/10.48550/arXiv.1709.08208

2017-09-24

Abstract:We have performed ab-initio calculations using plane-wave ultraviolet pseudopotential technique based on the density-functional theory (DFT) to study the structural, mechanical, electronic, optical and thermodynamic properties of orthorhombic MgV2O6. The calculated lattice parameters are in good agreement with the available experimental data. The second-order elastic constants and the other relevant quantities such as the Youngs modulus, shear modulus, Poissons ratio, compressibility, anisotropy factor, sound velocity, and Debye temperature have been calculated. After analyzing the calculated elastic constants, it is shown that the compound under study is mechanically stable. The analysis of the electronic band structure shows that this compound reveals semiconducting nature with band gap 2.195 eV and the contribution predominantly comes from O-2s states.

Materials Science
Temperature dependent surface relaxation for Al(110) and Mg(10-10) studied by orbital free ab initio molecular dynamics

Luis E. Gonzalez,David J. Gonzalez

DOI: https://doi.org/10.48550/arXiv.cond-mat/0606130

2006-06-06

Abstract:We have performed orbital free ab initio molecular dynamics simulations in order to study the thermal behaviour of two open surfaces of solid metallic systems, namely the (110) face of fcc Al and the (10-10) face of hcp Mg. Our results reproduce qualitatively both the experimental measurements and previous ab initio calculations performed with the more costly Kohn-Sham approach of Density Functional Theory. These calculations can be viewed as a validation test of the orbital free method for semiinfinite surfaces, and the results underpin its reliability.

Materials Science
Structure and elastic properties of Mg(OH)$_2$ from density functional theory

Paweł T Jochym,Andrzej M Oleś,Krzysztof Parlinski,Jan Łażewski,Przemysław Piekarz,Małgorzata Sternik

DOI: https://doi.org/10.1088/0953-8984/22/44/445403

2010-05-29

Abstract:The structure, lattice dynamics and mechanical properties of the magnesium hydroxide have been investigated with static density functional theory calculations as well as \it {ab initio} molecular dynamics. The hypothesis of a superstructure existing in the lattice formed by the hydrogen atoms has been tested. The elastic constants of the material have been calculated with static deformations approach and are in fair agreement with the experimental data. The hydrogen subsystem structure exhibits signs of disordered behaviour while maintaining correlations between angular positions of neighbouring atoms. We establish that the essential angular correlations between hydrogen positions are maintained to the temperature of at least 150 K and show that they are well described by a physically motivated probabilistic model. The rotational degree of freedom appears to be decoupled from the lattice directions above 30K.

Materials Science
Density functional theory study of phase stability, vibrational and electronic properties of $Mo_3Al_2C$

D. Reith,C. Blaas-Schenner,R. Podloucky

DOI: https://doi.org/10.1103/PhysRevB.86.104105

2012-08-07

Abstract:Based on density functional theory the noncentrosymmetric superconductor Mo_3Al_2C in its well established {\beta}-Mn type ($P4_{1}32$) crystal structure is investigated. In particular, its thermodynamical and dynamical stabilities are studied by calculating lattice vibrations within the harmonic approximation. It is found that the fully stoichiometric compound is dynamically unstable. However, compounds with carbon vacancies, i.e., Mo_3Al_2C_{1-x}, can be dynamically stabilized for vacancy concentrations x > 0.09. By means of a simple thermodynamical model we estimate x ~ 0.13-0.14 for Mo_3Al_2C_{1-x} at the experimental preparation temperatures. The influence of the carbon vacancy concentration on the electronic structure is investigated.

Materials Science
Ab Initio Study On The Thermal Properties Of The Fcc Al3mg And Al3sc Alloys

Dong-Lin Li,Ping Chen,Jian-Xiong Yi,Bi-Yu Tang,Li-Ming Peng,Wen-Jiang Ding

DOI: https://doi.org/10.1088/0022-3727/42/22/225407

2009-01-01

Abstract:Ab initio density functional theory (DFT) and density function perturbation theory (DFPT) have been used to investigate the thermal properties of the fcc Al3Mg and Al3Sc alloys over a wide range of pressure and temperature, in comparison with fcc Al. Phonon dispersions were obtained at equilibrium and strained configurations by density functional perturbation theory. Using the quasiharmonic approximation for the free energy, several thermal quantities of interest, such as the thermal Gruneisen parameter, heat capacity, thermal expansion coefficient and entropy, were calculated as a function of temperature and pressure, and the variation features of these quantities were discussed in detail. This investigation provides useful information for design and applications of technologically relevant Al-based alloys.
Electronic and vibrational properties of MgCu2O3

Somesh Chandra,Gurpreet Kaur,Abhaya S.,Balmukund Shukla,Srihari V.,Gopalkrishna M. Bhalerao,Govindaraj R.

DOI: https://doi.org/10.1002/jrs.6667

IF: 2.727

2024-03-09

Journal of Raman Spectroscopy

Abstract:Vibrational properties of MgCu2O3 compound have been investigated within the framework of the density functional perturbation theory (DFPT) as well as experimentally, both in excellent agreement. DFT + U methodology was employed along with DFPT calculations for obtaining vibrational properties: phonon density of states and phonon dispersion curves. Dipole–dipole corrections were made in phonon calculations, which affect only some of the IR modes resulting in TO/LO splitting. The vibrational properties of orthorhombic MgCu2O3 compound have been investigated within the framework of the density functional perturbation theory (DFPT) as well as experimentally, to validate the computational results. MgCu2O3 was synthesized by solid‐state reaction and characterized by synchrotron‐based X‐ray diffraction, Raman spectroscopy, and Fourier transform infrared spectroscopy. The DFT + U‐based first principle calculations were performed to obtain the correct electronic ground state and the band structure of this compound. The same DFT + U methodology was employed along with DFPT calculations for obtaining vibrational properties: phonon density of states and phonon band structure. The atomic vibrations for each mode were also analyzed, and the Raman and the IR active modes are identified. Experimentally observed Raman and infrared (IR) spectra agree well with the computed ones.

spectroscopy
Mechanical, Dynamical and Thermodynamic Properties of Al-3wt%Mg from First Principles

Rong Yang,Bin Tang,Tao Gao

DOI: https://doi.org/10.1515/zna-2017-0040

2017-01-01

Zeitschrift für Naturforschung A

Abstract:Abstract The mechanical, dynamical and thermodynamic properties of Al-3wt%Mg have been investigated using the first-principles method. The calculated structural parameter is in good agreement with previous works. Results for the elastic modulus, stress-strain relationships, ideal tensile and shear strengths are presented. Al-3wt%Mg is found to have larger moduli and higher strengths than Al, which is consistent with its exploitation in Al precipitate-hardening mechanisms. The partial density of states (PDOS) show that the partly covalent-like bonding through Al p-Mg s hybridization is the origin of excellent mechanical properties of Al-3wt%Mg. The phonon dispersion curves indicate that Al-3wt%Mg is dynamically stable at ambient pressure and 0 K. Furthermore, the Helmholtz free energy ΔF, the entropy S, the constant-volume specific heat CV and the phonon contribution to the internal energy ΔE are predicted using the phonon density of states. We expect that our work can provide useful guidance to help with the performance of Al-3wt%Mg.
First-principles study the mechanical, electronic, and thermodynamic properties of Mg-Al-Mn ternary compounds

Min Wang,Yunxuan Zhou,Wenjun Tian,Jianbo Li,Hongbing Chen,Jun Tan,Xianhua Chen

DOI: https://doi.org/10.1016/j.vacuum.2023.112140

IF: 4

2023-05-02

Vacuum

Abstract:In recent years, magnesium alloys have been used more and more widely due to their excellent lightweight and good plasticity. But correspondingly, the requirements for the elastic modulus ( E ) are more demanding. Therefore, to improve the deficiency, we are committed to find a way to increase the E . In this work, the mechanical, electronic, and thermodynamic properties of the Mg-Al-Mn ternary compounds were explored effectively based on first-principles calculations. It was found that the stabilities of these six structures were verified by the phonon spectrum, cohesive energy, and density of state, which showed that Mg 3 (MnAl 9 ) 2 possessed the best stability. Furthermore, Mg 3 (MnAl 9 ) 2 also had the largest bulk modulus, shear modulus, and E with values of 78.39, 50.94, and 125.6 GPa, respectively, due to the high bond strength of Al-Al bonds, and this was also verified by Mulliken's population analysis. Not only that, the largest hardness was reflected in Mg 3 (MnAl 9 ) 2 with a value of 9.04 and 9.11 GPa in Chen's and Tian's models. Similarly, the thermodynamic results showed that Mg 3 (MnAl 9 ) 2 had the highest Debye temperature as a value of 540.29 K and the highest limiting thermal conductivity with values of 1.216 W m −1 K −1 in Clarke's model and 0.945 W m −1 K −1 in Cahill's model.

materials science, multidisciplinary,physics, applied
Structure-dependent vibrational dynamics of Mg(BH4)2 polymorphs probed with neutron vibrational spectroscopy and first-principles calculations

Mirjana Dimitrievska,James L White,Wei Zhou,Vitalie Stavila,Leonard E Klebanoff,Terrence J Udovic

DOI: https://doi.org/10.1039/c6cp04469g

2016-09-14

Abstract:The structure-dependent vibrational properties of different Mg(BH4)2 polymorphs (α, β, γ, and δ phases) were investigated with a combination of neutron vibrational spectroscopy (NVS) measurements and density functional theory (DFT) calculations, with emphasis placed on the effects of the local structure and orientation of the BH4- anions. DFT simulations closely match the neutron vibrational spectra. The main bands in the low-energy region (20-80 meV) are associated with the BH4- librational modes. The features in the intermediate energy region (80-120 meV) are attributed to overtones and combination bands arising from the lower-energy modes. The features in the high-energy region (120-200 meV) correspond to the BH4- symmetric and asymmetric bending vibrations, of which four peaks located at 140, 142, 160, and 172 meV are especially intense. There are noticeable intensity distribution variations in the vibrational bands for different polymorphs. This is explained by the differences in the spatial distribution of BH4- anions within various structures. An example of the possible identification of products after the hydrogenation of MgB2, using NVS measurements, is presented. These results provide fundamental insights of benefit to researchers currently studying these promising hydrogen-storage materials.
Electronic structure, oscillator strength, and rovibrationally resolved photodissociation of 24MgH

Zhihao Deng,Na Li,Yu Kun Yang,Maomao Gong,Bing Yan,Yong Wu,Jian Guo Wang,Yongjun Cheng,Song Bin Zhang

DOI: https://doi.org/10.1051/0004-6361/202348473

2024-03-07

Abstract:A series of high-precision calculations for the electronic structure of MgH have been reported in the past two decades; however, most of them did not include the core-valence correlation and still exhibit distinct differences. Furthermore, the latest high-precision results have not been applied to the studies of photodissociation dynamics. The primary motivations of this paper are to calculate a more precise electronic structure of MgH considering a core-valence correlation and to provide the photodissociation cross-sections. The electronic structure of MgH is investigated by multi-reference configuration interaction calculations with Davidson correction (MRCI+Q). We performed two different sets of calculations to investigate the core-valence correlation and, as a result, obtained accurate potential energy curves (PECs) and transition dipole moments (TDMs). An extrapolation procedure was also employed to eliminate the error of basis set. Then, the photodissociation cross-sections were calculated using high-precision PECs and TDMs. The PECs and TDMs of the five lowest doublet electronic states, X$^2 B$'^2 E$^2 A$^2 and C$^2 are obtained from calculations including core-valence correlation, termed as CV-MRCI, while PECs of the ten lowest doublet states and three quartet states are also obtained from NCV-MRCI calculations without core-valence correlation. The spectroscopic constants and band oscillator strengths are also provided with high precision levels. The equilibrium $R_e$ and vertical excitation energy $T_e$ are only $0.1 $ different from the measurements. Based on the CV-MRCI results, the rovibrationally resolved photodissociation cross-sections for transitions from X$^2 to the other four states, as well as the total local thermodynamic equilibrium (LTE) cross-sections for temperatures up to 10000 K, are calculated.

astronomy & astrophysics
A Topos Perspective on the Kochen-Specker Theorem: IV. Interval Valuations

J. Butterfield,C.J. Isham

DOI: https://doi.org/10.48550/arXiv.quant-ph/0107123

2001-07-24

Abstract:We extend the topos-theoretic treatment given in previous papers of assigning values to quantities in quantum theory. In those papers, the main idea was to assign a sieve as a partial and contextual truth value to a proposition that the value of a quantity lies in a certain set $\Delta \subseteq \mathR$. Here we relate such sieve-valued valuations to valuations that assign to quantities subsets, rather than single elements, of their spectra (we call these `interval' valuations). There are two main results. First, there is a natural correspondence between these two kinds of valuation, which uses the notion of a state's support for a quantity (Section 3). Second, if one starts with a more general notion of interval valuation, one sees that our interval valuations based on the notion of support (and correspondingly, our sieve-valued valuations) are a simple way to secure certain natural properties of valuations, such as monotonicity (Section 4).

Quantum Physics,General Relativity and Quantum Cosmology
Electronic structure and optical properties of lightweight metal hydrides

M.J. van Setten,V.A. Popa,G.A. de Wijs,G. Brocks

DOI: https://doi.org/10.1103/PhysRevB.75.035204

2006-09-08

Abstract:We study the electronic structures and dielectric functions of the simple hydrides LiH, NaH, MgH2 and AlH3, and the complex hydrides Li3AlH6, Na3AlH6, LiAlH4, NaAlH4 and Mg(AlH4)2, using first principles density functional theory and GW calculations. All these compounds are large gap insulators with GW single particle band gaps varying from 3.5 eV in AlH3 to 6.5 eV in the MAlH4 compounds. The valence bands are dominated by the hydrogen atoms, whereas the conduction bands have mixed contributions from the hydrogens and the metal cations. The electronic structure of the aluminium compounds is determined mainly by aluminium hydride complexes and their mutual interactions. Despite considerable differences between the band structures and the band gaps of the various compounds, their optical responses are qualitatively similar. In most of the spectra the optical absorption rises sharply above 6 eV and has a strong peak around 8 eV. The quantitative differences in the optical spectra are interpreted in terms of the structure and the electronic structure of the compounds.

Materials Science

Ab-initio study of the vibrational properties of Mg(AlH$_4$)$_2$

Ab Initio Calculation of Structure and Thermodynamic Properties of Zintl Aluminide SrAl2

Ab initio study of magnesium alanate, Mg(AlH4)2

Elastic and Thermodynamic Properties of Complex Mg-Al Intermetallic Compounds via Orbital-Free Density Functional Theory

An Ab Initio Potential Energy Surface and Vibrational States of Mgh2(1(1)A ')

The Thermal Properties of Al–Mg–TM (tm=sc, Zr): Ab Initio Study

Theoretical and Experimental Research of Hydrogen Solid Solution in Mg and Mg-Al System

<i>Ab initio</i>study on the thermal properties of the fcc Al<sub>3</sub>Mg and Al<sub>3</sub>Sc alloys

Electronic and Vibrational Properties of gamma-AlH3

Ab-initio study of structural, elastic, electronic, optical and thermodynamic properties of MgV2O6

Temperature dependent surface relaxation for Al(110) and Mg(10-10) studied by orbital free ab initio molecular dynamics

Structure and elastic properties of Mg(OH)$_2$ from density functional theory

Density functional theory study of phase stability, vibrational and electronic properties of $Mo_3Al_2C$

Ab Initio Study On The Thermal Properties Of The Fcc Al3mg And Al3sc Alloys

Electronic and vibrational properties of MgCu2O3

Mechanical, Dynamical and Thermodynamic Properties of Al-3wt%Mg from First Principles

First-principles study the mechanical, electronic, and thermodynamic properties of Mg-Al-Mn ternary compounds

Structure-dependent vibrational dynamics of Mg(BH4)2 polymorphs probed with neutron vibrational spectroscopy and first-principles calculations

Electronic structure, oscillator strength, and rovibrationally resolved photodissociation of 24MgH

A Topos Perspective on the Kochen-Specker Theorem: IV. Interval Valuations

Electronic structure and optical properties of lightweight metal hydrides