Abstract:The heat generated in a high-temperature gas-cooled reactor can be used to drive the iodine-sulfur cycle to produce hydrogen. However, the sulfuric acid decomposition step requires a sophisticated sulfuric acid decomposer to increase the decomposition rate. The decomposition of sulfuric acid mainly occurs in the catalytic zone, and the optimization of its structure is very important for increasing the decomposition rate. This study focuses on the structural design of the catalytic zone of the sulfuric acid decomposer unit. The structure with double inner tubes is designed to analyze the influence of the inner tube heat transfer area and the catalytic volume of the annulus region on the decomposition rate. The species transport model is used to predict the proportion of products followed by analysis of the key factors affecting the decomposition rate of the catalytic domain. The results reveal that the new design attains the decomposition temperature requirements and increases the fluid velocity of the inner tube. This in turn promotes the heat transfer effect. The decomposition rate is negatively correlated with the flow rate. Nonetheless, a structure with double inner tubes which have the same total area of inner tube as a structure with a single inner tube has a better optimization effect than a structure which has the same annulus catalytic volume as a structure with single inner tube. It increases the decomposition rate by up to 6.1% while a structure which has the same annulus catalytic volume as a structure with a single inner tube does the same by up to 1.7%. The decomposition rate can be maintained at a relatively high level when the inlet velocity of the current structural design is about 0.2 m/s. This study provides a reference for the engineering design of sulfuric acid decomposer based on the heat exchange area and catalytic volume.

Sulfuric acid decomposition in the iodine–Sulfur cycle using heat from a very high temperature gas-cooled reactor

Modeling sulfuric acid decomposition in a bayonet heat exchanger in the iodine-sulfur cycle for hydrogen production

Numerical Study of Heat Transfer and Sulfuric Acid Decomposition in the Process of Hydrogen Production

Experimental and Numerical Investigation of Sulfuric Acid Decomposition for Hydrogen Production Via Iodine–sulfur Cycle

Structural Design Simulation of Bayonet Heat Exchanger for Sulfuric Acid Decomposition

Study on the High-Performance Catalyst for Sulfuric Acid Decomposition in the IS Cycle

INET's Catalysts Study for HI Decomposition in the Thermochemical Water-Splitting Iodine–sulfur Process for Hydrogen Production

Researches in the Catalysts for Sulfur Acid Decomposition in Iodine-Sulfur Thermochemical Cycle for Hydrogen Production

Purification of Sulfuric and Hydriodic Acids Phases in the Iodine-sulfur Process

Catalytic Decomposition of Sulfuric Acid over Copper Ferrite in Iodine Sulfur Thermochemical Cycle

Catalytic decomposition of sulphuric acid in Iodine-Sulphur and Hybrid-Sulphur processes for Hydrogen production: Estimation of effectiveness factor of catalyst

Detailed kinetic modeling and sensitivity analysis of hydrogen iodide decomposition in sulfur–iodine cycle for hydrogen production

The HI catalytic decomposition for the lab-scale H2 producing apparatus of the iodine-sulfur thermochemical cycle

THERMODYNAMICS STUDY ON REACTIONS OF SULFUR IODINE THEMOCHEMICAL CYCLE FOR H2S-SPLITTING

Occurrence of the Bunsen Side Reaction in the Sulfur-Iodine Thermochemical Cycle for Hydrogen Production

Thermal efficiency evaluation of the thermochemical H2S splitting cycle for the hydrogen and sulfur production

Catalytic decomposition of sulfuric acid on composite oxides and Pt/SiC

A review on the development of supported non-noble metal catalysts for the endothermic high temperature sulfuric acid decomposition step in the Iodine–Sulfur cycle for hydrogen production

Detailed Kinetic Modeling of Homogeneous H2SO4 Decomposition in the Sulfur–iodine Cycle for Hydrogen Production

Decomposition of Hydriodic Acid by Electrolysis in the Thermochemical Water Sulfur–iodine Splitting Cycle

Use of a Heat Pump to Supply Energy to the Iodine-Sulphur Thermochemical Cycle for Hydrogen Production