Abstract:The current study is performed to find sustainable solutions for the future of transportation and environmental well-being. Both conventional methods and experimental design table (L16 Orthogonal Array) techniques have been employed to examine and optimize a diesel-powered engine's operational and pollutant parameters. The L16 Orthogonal Array is obtained through Taguchi's experimental design approach using Minitab 16 software. The experimental design incorporated three control variables, namely engine speed, fuel type, and engine load, each with four levels. The operational parameters, namely brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC), as well as the emission characteristics, including hydrocarbon (HC), carbon monoxide (CO), nitrogen oxide (NO), and smoke emissions, were acquired using the L16 orthogonal array (OA) and subsequently examined. The utilization of methodologies such as signal-to-noise (S/N) ratio and grey analysis was employed to determine the optimal operational state of the engine to achieve maximum performance while minimizing emissions. The engine's ideal state of operation, in terms of BTE and BSFC, was determined to be at 75% engine load, 1000 r/min engine speed, and using 10 −4 (in vol) carbon nanotube incorporated 20% orange peel biodiesel (OPB20CNT100) blended fuel (A3-B1-C4). The study indicated that engine load significantly influenced BTE and BSFC, with 84.05% and 87.79% contribution factors, respectively. At 25% engine load, 1000 r/min, and OPB20CNT100 fuel (A1-B1-C4) CO, smoke, NO, and HC emissions were the lowest. Engine load affects emissions the most. Engine BSFC increased 3.10% and NO emissions 1.77%. BTE, CO, smoke, and HC emissions decreased by 1.9%, 12.29%, 47.05%, and 47.22%, respectively, at optimal operating conditions concerning diesel fuel. This study shows that Taguchi-Grey's experimental design optimizes diesel engine operational and pollutant attributes. The outcomes revealed that orange peel biodiesel infused with CNT can replace diesel fuel in an environmentally friendly way. This alternative fuel could clean and improve transportation.

Alternative Methods for Biodiesel Cetane Number Valuation: A Technical Note

Experimental Study of Cetane Number on Methanol/Biodiesel Combustion Characteristics

Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel

Effect of Diesel Cetane Number on Engine Performance

Numerical Study of the Effects of Biodiesel Unsaturation on Combustion and Emission Characteristics in Diesel Engine

Reducing NOx emission from palm biodiesel/diesel blends in CI engine: A comparative study of cetane improvement techniques through hydrogenation and fuel additives

Comparative thermal assessment and emission analysis of various green biodiesel from novel feedstocks for CI engines: a sustainable approach towards emission reduction

Numerical Comparison of B20 Biodiesel and Petroleum Diesel in terms of Performance, Combustion, and Emission at Constant Speed

One Way to Reduce the Nox Emission of Biodiesels: the Increase of Cetane Number

Biodiesel standard and quality assessment

Environmental and performance impacts of 2-ethylhexyl nitrate and ethanol in diesel blends: A comprehensive study

A Taguchi-based hybrid multi-criteria decision-making approach for optimization of performance characteristics of diesel engine fuelled with blends of biodiesel-diesel and cerium oxide nano-additive

Investigation of the Effects of Biodiesel Produced from Crambe Abyssinica Plant on Combustion, Engine Performance and Exhaust Emissions

Performance, emission characteristics of CI engines fueled with Annona seed biodiesel blends and 1-pentanol as an additive

Performance and Emission Analysis of Biodiesel Blends in a Low Heat Rejection Engine with an Antioxidant Additive: An Experimental Study

Improving Of Ci Engine Performance Using Three Different Types Of Biodiesel

Assessment of the Engine Vibration and Noise Characteristics of an Unmodified Direct Injection Engine Powered With Non-Feedstock Citrullus lanatus Seed Oil

Evaluating Engine Performance, Emissions, Noise, and Vibration: A Comparative Study of Diesel and Biodiesel Fuel Mixture

Effect of the Cetane Number on the Combustion and Emissions of Diesel Engines by Chemical Kinetics Modeling

Internal combustion engine fuel synthesis, suitability, physical property evaluation using mixing models and backpropagation ANN algorithm

Analysis and Optimization of Operational and Pollutant Attributes of Diesel Engine with CNT-Infused Orange Peel Biodiesel-Diesel Blend Fuel