Abstract:A single-cylinder marine diesel engine was modified to be operated in reactivity controlled compression ignition (RCCI) combustion mode. The engine fueling system was upgraded to a common rail fuel injection system. Natural gas (NG) was used as port fuel injection, and a diesel/sunflower methyl ester biodiesel mixture was used for direct fuel injection. The fraction of biodiesel in the direct fuel injection was changed from 0% (B0; 0% biodiesel and 100% diesel) to 5% (B5) and 20% (B20) while keeping the total energy input into the engine constant. The objective was to understand the impacts of the increased biodiesel fraction on the combustion characteristics and stability, emissions, and knocking/misfiring behavior, keeping all other influential parameters constant. The results showed that nitrogen oxides (NOx) emissions of B5 and B20 without the need for any after-treatment devices were lower than the NOx emission limit of the Euro VI stationary engine regulation. B5 and B20 NOx emissions decreased by more than 70% compared to the baseline. Significantly more unburned hydrocarbons (UHCs) and carbon monoxide (CO) emissions were produced when biodiesel was used in the direct fuel injection (DFI). The results also showed that using B5 and B20 instead of B0 led to an increase of 18% and 13.5% in UHCs and an increase of 88.5% and 97% in CO emissions, respectively. Increasing the biodiesel fraction to B5 and B20 reduced the maximum in-cylinder pressure by 3% and 10.2%, respectively, compared to B0. Combustion instability is characterized by the coefficient of variation (COV) of the indicated mean effective pressure (IMEP), which was measured as 4.2% for B5 and 4.8% for B20 compared to 1.8% for B0. Therefore, using B20 and B5 resulted in up to 34.9% combustion instabilities, and 18.5% compared to the baseline case. The tendency for knocking decreased from 13.7% for B0 to 4.3% for B20. The baseline case (B0) had no misfiring cycle. The B5 case had some misfiring cycles, but no knocking cycle was observed. Moreover, the historical cyclic analysis showed more data dispersions when the biodiesel fraction increased in DFI. This study shows the potential of biodiesel replacement in NG/diesel RCCI combustion engines. This study shows that biodiesel can be used to effectively reduce NOx emissions and the knocking intensity of RCCI combustion. However, combustion instability needs to be monitored.

Investigation of the Effects of Biodiesel Produced from Crambe Abyssinica Plant on Combustion, Engine Performance and Exhaust Emissions

The Effect of Different Mixing Proportions and Different Operating Conditions of Biodiesel Blended Fuel on Emissions and Performance of Compression Ignition Engines

Experimental assessment of catalytic biofuel effect on performance and exhaust emission of diesel engine

Evaluating Engine Performance, Emissions, Noise, and Vibration: A Comparative Study of Diesel and Biodiesel Fuel Mixture

Influence of Fuel Filterability, Performance, and Emission Characteristics of Dual Biodiesel Mixture with Diesel Blends in Compression Ignition Engine

Experimental investigation of combustion, performance and emission characteristics of a diesel engine fuelled with diesel–biodiesel–alcohol blends

An experimental investigation of the effects of blending camphor oil infused with jack fruit biodiesel and nanoparticles on the performance, combustion, and exhaust emissions of a compression ignition engine

Performance and CO2 emission of a single cylinder compression ignition engine powered by Khaya senegalensis non-edible seeds fuel blends

Performance and emissions characteristics of a common rail direct injection diesel engine powered by ignition enhancer-biodiesel blends

Environmental and performance impacts of 2-ethylhexyl nitrate and ethanol in diesel blends: A comprehensive study

Effects of different biodiesels and their blends with oxygenated additives on emissions from a diesel engine

Exploring the Environmental and Performance Implications of Utilizing Waste Swine Oil Biodiesel in CI Engines

Analysis and optimization of Guizotia abyssinica (L.) with alumina, titanium and diesel blends on DI engine combustion and emissions

Performance, combustion and emission characteristics of a single cylinder CI engine running on diesel-biodiesel-water emulsion with additive

Improving Of Ci Engine Performance Using Three Different Types Of Biodiesel

Experimental investigation of engine performance and emissions, and characterization, of waste transformer oils and diesel blends with biodiesel produced from olive oil wastes in a CI engine

Effects of Blended Diesel-Biodiesel Fuel on Emissions of a Common Rail Direct Injection Diesel Engine with Different Exhaust Gas Recirculation Rates

Experimental investigation of features of CI engine fueled with blends of camphor oil with biomass waste simarouba glauca oil

Comparative thermal assessment and emission analysis of various green biodiesel from novel feedstocks for CI engines: a sustainable approach towards emission reduction

Experimental assessment of non-edible candlenut biodiesel and its blend characteristics as diesel engine fuel

Detailed Analysis of the Effects of Biodiesel Fraction Increase on the Combustion Stability and Characteristics of a Reactivity-Controlled Compression Ignition Diesel-Biodiesel/Natural Gas Engine