Abstract:In this paper, a conceptual investigation of the interface between wireless power devices and a retina complementary metal oxide semiconductor (CMOS) neuron integrated circuit (IC) have been presented. The proposed investigation consists of three designs: design-I, design-II, and design-III. Design-I involves a slotted loop monopole antenna as per American National Standards Institute (ANSI) guidelines, which achieve an ultra-wide band ranging from 3.1 GHz to 10.6 GHz. The biocompatible antenna is made on silicon-nitride substrate using on-wafer packaging technology and it is used as a receiver device. The performance of antenna provides a wideband, sufficient power to receive, and low losses due to the avoidance of printed circuit board (PCB) fabrication. A CMOS based multi-stack power harvesting circuit achieves the output power ranging from 4 mW to 2.7 W and corresponds from the selected Radio Frequency (RF) bands of loop antenna is exhibited in design-II. The power efficiency of 40% to 82%, with respect to output powers of 4 mW to 2.7 W, is achieved. Design-III includes a CMOS based retina neuron circuit that employs a dynamic feedback technique and support to achieve the number of read-out spikes. At the end of the interface between wireless power devices and a CMOS retina neuron IC, 50 mV read-out spikes are achieved, with varying light intensity, from 0 mW/cm2 to 2 mW/cm2. The proposed design-II and design-III are implemented and fabricated using commercial CMOS 0.065 μm, Samsung process. The antenna and RF power harvesting IC could be placed on a contact lens platform while retina neuron IC can be implanted after ganglions cells inside the eye. The antenna and harvesting IC are physically connected to the retina circuit in the form of light. This conceptual investigation could support medical professionals in achieving an interfacing approach to restore the image visualization.

Micro-transponder systems for medical applications

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Bio-Patch Design and Implementation Based on a Low-Power System-on-Chip and Paper-Based Inkjet Printing Technology

An Energy-Efficient Soc For Closed-Loop Medical Monitoring And Intervention

A 27-Mbps, 0.08-mm3 CMOS Transceiver with Simultaneous Near-field Power Transmission and Data Telemetry for Implantable Systems

Signal Processing System-on-chip Design for Biomedical Applications.

Wireless energy and signal transmission system for micro implantable medical system

Low Power Ic Design of the Wireless Monitoring System of the Orthopedic Implants

An Ultra-Low Power 400mhz OOK Transceiver for Medical Implanted Applications.

Low-power circuits for the bidirectional wireless monitoring system of the orthopedic implants

Wireless, Ultra-Low-Power Implantable Sensor for Chronic Bladder Pressure Monitoring

A Wireless Artificial Mechanoreceptor in 180-nm CMOS

A 4.5 μW Miniaturized 3-Channel Wireless Intra-Cardiac Acquisition System

Wireless powered implantable bio-sensor tag system-on-chip for continuous glucose monitoring

A low power MICS band phase-locked loop for high resolution retinal prosthesis

A 13.56-MHz −25-dBm-Sensitivity Inductive Power Receiver System-on-a-Chip With a Self-Adaptive Successive Approximation Resonance Compensation Front-End for Ultra-Low-Power Medical Implants

22.1 A 769μw Battery-Powered Single-Chip SoC with BLE for Multi-Modal Vital Sign Health Patches

Study on implantable low-power consumption wireless system for small animal monitoring

A Resistive Sensor Interface IC with Inductively Coupled Wireless Energy Harvesting and Data Telemetry for Implantable Pressure Sensing.

Toward a miniature wireless integrated multisensor microsystem for industrial and biomedical applications

A Conceptual Investigation at the Interface between Wireless Power Devices and CMOS Neuron IC for Retinal Image Acquisition