Abstract:Single‐shot computational microwave imaging of a target is obtained using a frequency‐diverse aperture. Radiation from a conducting rough reflector, illuminated by an ultra‐wideband antenna provides random patterns. To obtain spatially uncorrelated near‐field scans, four conducting walls are placed around the rough surface. Scattering is calculated using GO approximation with multiple interactions. Finally, the image is reconstructed using the minimum least‐squares technique. This paper proposes a single‐shot computational imaging using a new frequency‐diverse aperture, an open‐ended cavity with a rough surface base. First, it shows that scattering from a conducting rough surface made of conducting cones placed at random positions on a conducting ground plane, normally illuminated by an ultra‐wideband horn antenna (working in the 2–20 GHz range) provides random patterns with a frequency correlation function (FCF) width of Δf, about hundreds of MHz. Next, by introducing four conducting walls placed around the rough surface, it obtains a higher number of spatially uncorrelated radiation patterns and a narrower FCF width of about Δf/10, tens of MHz. To approximate the radiation patterns and measurement matrices in the numerical simulations, the geometrical optics (GO) approximation is used taking into account multiple interactions. On the other hand, to estimate them in practice, a trihedral corner reflector installed on an XYZ positioning table is employed. Finally, the image of a planar object with the shape of plus is reconstructed using the minimum least‐squares technique. The paper shows that for a 0.81 square metre image size, a decent‐focused image with a pixel size of about 0.81/400 square metres (about 5 cm × 5 cm) is realisable by using 400 frequency samples within the frequency range of 2–20 GHz.

A frequency-hopping approach for microwave imaging of large inhomogeneous bodies

A Modified Wavenumber Algorithm of Multi-Layered Structures with Oblique Incidence Based on Full-Matrix Capture

3-D Ultrasonic Image Reconstruction in Frequency Domain Using a Virtual Transducer Model.

Microwave Imaging Enhanced by Duplexed Random Phase Modulations

A Dual-Band Microwave Imaging System Prototype for Quantitative 3-D Dielectric Reconstruction

Single-Frequency Computational Imaging Using Oam-Carrying Electromagnetic Wave

High-Resolution Multiple Microwave Frequency Measurement Based on Stimulated Brillouin Scattering

Single-Shot Frequency-Diverse Near-Field Imaging Using High-Scanning-Rate Leaky-Wave Antenna

Reconstruction of Three-Dimensional Targets Using Frequency-Diversity Data

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Single-Frequency Microwave Imaging with Dynamic Metasurface Apertures

Microwave Frequency Measurement Based on Photonic Sampling Analog-to-digital Conversion

Frequency-Diverse Holographic Metasurface Antenna for Near-Field Microwave Computational Imaging

Metamaterial microwave holographic imaging system

Super-resolution microwave imaging: Time-domain tomography using highly accurate evolutionary optimization method

Terahertz Far-Field Subwavelength Imaging By Frequency Scanning

Broadband High-Resolution Microwave Frequency Measurement Based on Low-Speed Photonic Analog-to-digital Converters.

Compact Microwave Imaging System Using Flexible Antenna and Differential Imaging Technique

Microwave holographic imaging method with improved resolution

Monostatic microwave imaging of cancerous breast phantom with a frequency to time domain conversion technique

Frequency‐diverse aperture imaging using an open cavity with a rough base