Abstract:Polyethylene (PE) occupies a large proportion in waste plastics, while its natural degradation rate is slow, if without timely recycling treatment, which would directly lead to serious ecological and environmental problems. Incineration and thermolysis methods based on thermochemical conversion are commonly used effective ways for the treatment of plastic waste, which presented the advantages of high efficiency and low pollution. In this paper, cone calorimeter and tubular thermolysis furnace-mass spectrometer (MS) combination platform were applied for the catalytical combustion and thermolysis characteristics of PE with three kinds of catalysts, which were H-Zeolite Standard Oil Corporation Of New York (Socony) Mobil-Five (HZSM-5), H-ultra stable Y zeolite (HUSY), and Mobil Composition of Matters-41 (MCM-41), respectively. Under the effect of MCM-41, the heat release rate (HRR) of samples under different heat flux (25, 35, 45 kW/m2) was decreased by 59.7%, 48.8%, and 46.6%, and the time to peak HRR was advanced in 60 s, 27 s, and 10 s, respectively. Therefore, the burning efficiency could be controlled and the fire risk would be declined with the addition of catalysts. With the increase of the catalyst pore diameter, the combustion efficiency was enhanced, while rising incineration temperature would not necessarily mean an increase in combustion efficiency. During thermolysis, HZSM-5 was most effective catalyst for the conversion of PE to alkenes and aromatic hydrocarbons (AHs) such as benzene, toluene, and xylene (BTX). Among the three catalysts, the microporous HZSM-5 showed higher catalytic performance due to its strong acidity and suitable pore structure. This work enriches the combustion and thermolysis mechanism of PE, and provides reference and basis for the design of waste plastic recycling processing.Graphical abstractThe catalytic incineration and pyrolysis of polyethylene were investigated, which might provide reference for the waste plastic recycling processing design.

Parameter selection for the hydroconversion of waste polyethylene plastic under mild conditions: A comprehensive evaluation

Mechanistic Understanding of Efficient Polyethylene Hydrocracking over Two-Dimensional Platinum-Anchored Tungsten Trioxide.

Analysis on low-temperature polyethylene pyrolysis and gasification in different atmospheres

Conversion of polyethylene waste to short chain hydrocarbons under mild temperature and hydrogen pressure with metal-free and metal-loaded MFI zeolites

Conversion of Polyethylene to Low-Molecular-Weight Oil Products at Moderate Temperatures Using Nickel/Zeolite Nanocatalysts

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Selective Hydrogenolysis Conversion of Polyethylene into Alkyl Oil over Iridium-based Catalyst

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Upcycling Polyethylene to High‐Purity Hydrogen under Ambient Conditions via Mechanocatalysis

Hydrothermal Oxidation of Polyethylene (PE) Plastic to Short-chain Fatty Acids (C1 - C5)

Integrating continuous-stirred microwave pyrolysis with ex-situ catalytic upgrading for linear low-density polyethylene conversion: Effects of parameter conditions

Efficient Low-Temperature catalytic depolymerization of LLDPE into valuable compounds using H-ZSM-5 catalysts and water

Molecular Dynamics Simulation of Converting Waste Polyethylene (PE) to Chemicals and Fuels under Non-Isothermal and Isothermal Conditions

Enhanced hydroconversion of polyethylene via dual-functional catalysis: Exploiting ZSM-22 pore-mouth catalysis and Ru electronic effect

Selective Upcycling of Polyethylene over Ru/H‐ZSM‐5 Bifunctional Catalyst into High‐Quality Liquid Fuel at Mild Conditions

Polyethylene Hydrogenolysis by Dilute RuPt Alloy to Achieve H2-pressure-independent Low Methane Selectivity

Ultra‐Narrow Alkane Product Distribution in Polyethylene Waste Hydrocracking by Zeolite Micropore Diffusion Optimization

A reusable, impurity-tolerant and noble metal–free catalyst for hydrocracking of waste polyolefins

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Catalytic Reforming of the Aqueous Phase Derived from Diluted Hydrogen Peroxide Oxidation of Waste Polyethylene for Hydrogen Production