Abstract:This paper presents the results of research on the impact of the use of different tools and the shape of the additional rivet, on the geometric quality of the joint, the energy consumption of the forming process, the distortion of the steel samples, and the load capacity of the joints. The tests were carried out for DX51D steel sheets with a thickness of 1.5 [mm] joined by using three different sets of tools. A steel rivet with a hardness of 400HV1 and various shapes was used for the tests. In addition to the full rivet, two types of rivet were used, the first with a through hole and the second with a depth of hole of 3 [mm]. The holes in the rivet had different diameters: 1.0, 1.5, 2.0 and 2.5 [mm]. The influence of changing the shape of the rivet (hole and its diameter) on the change in forming force and energy consumption of the joining process was analyzed. The lowest forming force was achieved for a rivet with a through hole and a hole diameter of 2.5 [mm]. The lowest joint forming force was obtained for the die with movable segments. For joints made with three tool arrangements and a series with a modified rivet, the amount of sheet metal deviation was analyzed. Of the three cases of arrangement of tools used to form the joint, the largest deviation of the sheets occurred at the clinch joint formed with a solid round die. In the case of a series of clinch-rivet joints with a modified rivet, the greatest deviation of the sheets occurred for the rivet with a hole of 1.5 [mm]. Changes in the geometric structure of the joint were also studied, and changes in the surface of the sheets in the joint area were observed. The highest value of the interlock in the joint was obtained when a solid rivet was used in the clinch-riveting technology. The strength of the joints was also identified in the lap shear test and the energy consumption at failure was determined. The use of a rivet increased the maximum load capacity to almost twice that of the clinch joint.

Analysis of the influence of forming tool geometry on clinching joint for cylindrical surfaces

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Forming Process and Morphology Control of Mechanical Clinch Joint of Steel/Aluminum Sheet

Optimization of Geometrical Design of Clinching Tools in Clinching Process with Extensible Dies

Influence of process variations on clinch joint characteristics considering the effect of the nominal tool design

The Energy Consumption of the Process of Joining Steel Sheets with the Use of Clinching With and Without an Additional Rivet, and Analysis of Sheet Deformation and Mechanical Strength of Joints

The Experimental Analysis of Shear Strength of Round Joints

Investigation Of Flat Clinching Process Combined With Material Forming Technology For Aluminum Alloy

Investigation on Mechanical Behavior of Clinched Joint Using Extensible and Flat Die Techniques

Experimental Investigation On The Joining Of Aluminum Alloy Sheets Using Improved Clinching Process

Investigation of the clinching process with rectangle punch

Research on material flow in flat clinching process and joint failure mechanism

Experimental Investigation Of Joining The Metal/Polymer/Metal Composite Sheets By Clinching Method

Steel‐aluminum clinched joints mechanical properties and strength prediction under different geometric parameters

The Influence of Heat Treatment on the Microstructure, Surface Roughness and Shear Tensile Strength of AISI 304 Clinch Joints

Recent development of clinching tools and machines

Research on the material flow and joining performance of two-strokes flattening clinched joint

The State of the Art of Finite Element Analysis in Mechanical Clinching

Optimization of Geometrical Design of Clinching Tools in Flat-Clinching

Recent development of improved clinching process

Consideration of the manufacturing history of sheet metal components for the adaptation of a clinching process