Abstract:Direct Laser Interference Patterning (DLIP) is used to texture current collector foils in a roll-to-roll process using a high-power picosecond pulsed laser system operating at either fundamental wavelength of 1064 nm or 2nd harmonic of 532 nm. The raw beam having a diameter of 3 mm @ 1/e2 is shaped into an elongated top-hat intensity profile using a diffractive so-called FBS®-L element and cylindrical telescopes. The shaped beam is split into its diffraction orders, where the two first orders are parallelized and guided into a galvanometer scanner. The deflected beams inside the scan head are recombined with an F-theta objective on the working position generating the interference pattern. The DLIP spot has a line-like interference pattern with about 15 μm spatial period. Laser fluences of up to 8 J/cm2 were achieved using a maximum pulse energy of 0.6 mJ. Furthermore, an in-house built roll-to-roll machine was developed. Using this setup, aluminium and copper foil of 20 μm and 9 μm thickness, respectively, could be processed. Subsequently to current collector structuring coating of composite electrode material took place. In case of lithium nickel manganese cobalt oxide (NMC 622) cathode deposited onto textured aluminum current collector, an increased specific discharge capacity could be achieved at a C-rate of 1C.For the silicon/graphite anode material deposited onto textured copper current collector, an improved rate capability at all C-rates between C/10 and 5C was achieved. The rate capability was increased up to 100 % compared to reference material. At C-rates between C/2 and 2C, the specific discharge capacity was increased to 200 mAh/g, while the reference electrodes with untextured current collector foils provided a specific discharge capacity of 100 mAh/g, showing the potential of the DLIP technology for cost-effective production of battery cells with increased cycle lifetime.

An improved continuous compositional-spread technique based on pulsed-laser deposition and applicable to large substrate areas

A continuous compositional-spread technique based on pulsed-laser deposition and applied to the growth of epitaxial films

In Situ Monitoring of Composition and Sensitivity to Growth Parameters of Pulsed Laser Deposition

A Novel Gradient Composition Spreading and Nanolayer Stacking Process for Combinatorial Thin-Film Materials Library Fabrication.

Interface combinatorial pulsed laser deposition to enhance heterostructures functional properties

Pulsed Laser Deposition of Large-Sized Superlattice Films with High Uniformity.

3D Lithography and Deposition on Highly Structured Surfaces Using Plasma Surface Modification, SAM Coating, and Contact Displacement Electroless Plating

Recent advances in pulsed-laser deposition of complex-oxides

Masked-assisted radial-segmented target pulsed-laser deposition: A novel method for area-selective deposition using pulsed-laser deposition

Real-Time Diagnostics of 2D Crystal Transformations by Pulsed Laser Deposition: Controlled Synthesis of Janus WSSe Monolayers and Alloys.

In Situ Synthesis and Microfabrication of High Entropy Alloy and Oxide Compounds by Femtosecond Laser Direct Writing under Ambient Conditions

Autonomous Synthesis of Thin Film Materials with Pulsed Laser Deposition Enabled by In Situ Spectroscopy and Automation

Pulsed laser deposition with simultaneous in situ real-time monitoring of optical spectroscopic ellipsometry and reflection high-energy electron diffraction

Epitaxial growth of complex oxides on silicon by enhanced surface diffusion in large area pulsed laser deposition

Development of a High Magnetic Field Assisted Pulsed Laser Deposition System.

Targeting new ways for large-scale, high-speed surface functionalization using Direct Laser Interference Patterning in a roll-to-roll process

Large Area Automated Characterisation of Chemical Vapour Deposition Grown Monolayer Transition Metal Dichalcogenides Through Photoluminescence Imaging

Geometry of Chemical Beam Vapor Deposition System for Efficient Combinatorial Investigations of Thin Oxide Films: Deposited Film Properties versus Precursor Flow Simulations

Imaging Pulsed Laser Deposition oxide growth by in-situ Atomic Force Microscopy

Development of a Scanning Probe Microscopy Integrated Atomic Layer Deposition System for in Situ Successive Monitoring of Thin Film Growth

Controllable growth of wafer-scale PdS and PdS 2 nanofilms via chemical vapor deposition combined with an electron beam evaporation technique