Abstract:Ytterbium-doped photonic crystal fibers have been the major player in the extremely rapid increase of the output power of high power femtosecond fiber laser systems. However, rare earth doping of silica leads to an increased refractive index of the core, which is, in turn, compensated by other codopands. In the case of Very Large Mode Area (VLMA) Large Pitch photonic crystal Fibers (LPFs) for high power laser systems it is vital to obtain an ideal index-matching between the actively doped core region and the passive surrounding air hole structure. In [1] it was demonstrated that index-matching is most important for mode area scaling of core-pumped LPFs with effective single-mode operation through mode-discrimination. However, surrounding the core structure by a pump cladding leads to a completely new structure, where core and cladding modes can interact through anticrossings. In [2] it was shown that fundamental mode (FM) anticrossings can be avoided and higher order mode (HOM) anticrossings can be exploited by the proper choice of the airclad diameter. With growing airclad diameter, the effective index of a core guided mode basically remains constant while cladding modes posses growing effective indices and, thus, will cross the effective index of the core guided FM. However, some HOMs deform when their effective index approaches the FM index, the shape of both modes converge. Finally the former HOM takes over the role of the FM while the former FM is deformed.

Reduced micro-deformation attenuation in large-mode area photonic crystal fibers for visible applications

Recent Progress in Optical Micro/Nanofiber Technology

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Silica Nanofibers and Subwavelength-Diameter Fibers

Roughness-induced Radiation Losses in Optical Micro or Nanofibers.

Modeling bending losses of optical nanofibers or nanowires.

Simultaneously Achieving a Large Negative Dispersion and a High Birefringence Over Er and Tm Dual Gain Bands in a Square Lattice Photonic Crystal Fiber

Ultra-Long Subwavelength Micro/Nanofibers with Low Loss

Parallel Fabrication of Silica Optical Microfibers and Nanofibers

10-W-level CW waveguiding in an optical micro/nanofiber

Single-mode photonic crystal fiber with an effective area of 600 square-micron and low bending loss

High-power Continuous-Wave Optical Waveguiding in a Silica Micro/nanofibre.

Ultralow bending-loss micro-structured fiber with large-mode-area

An optimized configuration of large mode field area PMMA photonic crystal fiber with low bending loss: a new approach

A miniaturized tunable optical attenuator with ultrawide bandwidth based on evanescent-field coupling between nanofibers

Low-loss photonic crystal fibers for transmission systems and their dispersion properties

Large mode area single mode photonic crystal fiber with ultra-low bending loss

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

Ultrahigh-Precision Diameter Control of Nanofiber Using Direct Mode Cutoff Feedback

Anticrossings induced by index depressions and their impact on mode area scaling of active large pitch fibers

Theoretical study and experimental fabrication of high negative dispersion photonic crystal fiber with large area mode field.