Abstract:The ATLAS detector is installed in its experimental cavern at Point 1 of the CERN Large Hadron Collider. During Run 2 of the LHC, a luminosity of $\mathcal{L}=2\times 10^{34}\mathrm{cm}^{-2}\mathrm{s}^{-1}$ was routinely achieved at the start of fills, twice the design luminosity. For Run 3, accelerator improvements, notably luminosity levelling, allow sustained running at an instantaneous luminosity of $\mathcal{L}=2\times 10^{34}\mathrm{cm}^{-2}\mathrm{s}^{-1}$, with an average of up to 60 interactions per bunch crossing. The ATLAS detector has been upgraded to recover Run 1 single-lepton trigger thresholds while operating comfortably under Run 3 sustained pileup conditions. A fourth pixel layer 3.3 cm from the beam axis was added before Run 2 to improve vertex reconstruction and $b$-tagging performance. New Liquid Argon Calorimeter digital trigger electronics, with corresponding upgrades to the Trigger and Data Acquisition system, take advantage of a factor of 10 finer granularity to improve triggering on electrons, photons, taus, and hadronic signatures through increased pileup rejection. The inner muon endcap wheels were replaced by New Small Wheels with Micromegas and small-strip Thin Gap Chamber detectors, providing both precision tracking and Level-1 Muon trigger functionality. Tile Calorimeter scintillation counters were added to improve electron energy resolution and background rejection. Upgrades to Minimum Bias Trigger Scintillators and Forward Detectors improve luminosity monitoring and enable total proton-proton cross section, diffractive physics, and heavy ion measurements. These upgrades are all compatible with operation in the much harsher environment anticipated after the High-Luminosity upgrade of the LHC and are the first steps towards preparing ATLAS for the High-Luminosity upgrade of the LHC. This paper describes the Run 3 configuration of the ATLAS detector.

LHC Detector Upgrades

A high energy LHC machine: experiments `first' impressions

ATLAS IBL: a challenging first step for ATLAS Upgrade at the sLHC

The upgrade of the CMS muon system for the High Luminosity LHC

ALICE detector upgrades

A new CMS pixel detector for the LHC luminosity upgrade

The upgrade of the CMS electromagnetic calorimeter for HL-LHC

CMS detector: Run 3 status and plans for Phase-2

Status of the CMS Phase I Pixel Detector Upgrade

The CMS Phase-1 Pixel Detector Upgrade

CMS Pixel Detector Upgrade

The High-Level Trigger for the CMS Phase-2 Upgrade

Upgrading the Inner Tracking System and the Time Projection Chamber of ALICE

GEM Detectors for the CMS Endcap Muon System: status of three new detector stations

The CMS Trigger Upgrade for the HL-LHC

Triple-GEM detectors for the Phase-2 upgrade of the CMS muon spectrometer

Measurements and TCAD simulation of novel ATLAS planar pixel detector structures for the HL-LHC upgrade

Expected performance of the upgrade ATLAS experiment for HL-LHC

Development of the CMS detector for the CERN LHC Run 3

The ATLAS Experiment at the CERN Large Hadron Collider: A Description of the Detector Configuration for Run 3