Abstract:Fiber–particle-reinforced silica aerogels are widely applied in thermal insulation. Knowing their effective thermal conductivity (ETC) and radiative characteristics under high temperatures is necessary to improve their performance. This article first analyzes the radiation characteristics of silica aerogels doped with opacifier particles and reinforced fibers, and then a universal model is established to predict the ETC. Furthermore, the impacts of different parameters of opacifier particles and reinforced fibers on the thermal insulation performance of silica aerogels are investigated. The results indicate that SiC exhibits comparatively strong absorption characteristics, making it a good alternative for opacifiers to improve thermal insulation performance under high temperatures. For the given type and volume fraction of opacifier particles, there exists an optimal diameter and volume fraction to achieve the best insulation performance of silica aerogel under a certain temperature. Considering that SiO2 fibers exhibit a limited extinction capability and higher conductive thermal conductivity under high temperatures, for fiber–particle-reinforced silica aerogels, it is beneficial for their insulation performance to reduce the fiber volume fraction when the required mechanical properties are satisfied.
What problem does this paper attempt to address?
This paper aims to solve the problem of the thermal insulation performance of silica aerogels at high temperatures. Specifically, the research focuses on the influence of reinforcing fibers and opacifier particles on the effective thermal conductivity (ETC) of silica aerogels. Although pure silica aerogels have the advantages of being lightweight and having low thermal conductivity, they have the disadvantages of being brittle and having a high infrared transmittance, which makes it difficult for them to maintain structural integrity and high - efficiency thermal insulation performance under high - temperature conditions. To solve these problems, researchers incorporated reinforcing fibers into silica aerogels to improve mechanical properties and added opacifier particles to improve the thermal insulation performance at high temperatures. However, the heat conduction and radiative heat transfer characteristics of these composite materials are much more complex than those of pure matrix materials, and it is more challenging to predict their effective thermal conductivity.
The main objectives of the paper are:
1. **Analyze the radiation characteristics after incorporating opacifier particles and reinforcing fibers into silica aerogels**: Through experimental and theoretical analysis, explore the influence of different types of opacifier particles and reinforcing fibers on the radiative heat transfer of silica aerogels.
2. **Establish a general model to predict the effective thermal conductivity**: Based on Mie theory and existing thermal conductivity models, propose a general model that can predict the effective thermal conductivity of silica aerogels after incorporating reinforcing fibers and opacifier particles.
3. **Study the influence of different parameters on the thermal insulation performance**: By changing the types, volume fractions, and diameters of opacifier particles and reinforcing fibers, quantitatively analyze the influence of these parameters on the thermal insulation performance of silica aerogels.
The conclusions of the paper include:
1. For a specific type of opacifier particle and volume fraction, there is an optimal particle diameter that can maximize the extinction performance and minimize the radiative thermal conductivity at a specific temperature, and this optimal size changes with temperature.
2. Different types of opacifier particles have different mechanisms in blocking radiative heat transfer: carbon mainly relies on absorption characteristics, titanium dioxide mainly utilizes the scattering mechanism, and the dominant mechanism of silicon carbide depends on the wavelength. In addition, all three particles exhibit significant anisotropic scattering characteristics.
3. When the volume fraction of opacifier particles is increased to 1%, the radiative heat transfer of silica aerogels at high temperatures can be significantly inhibited, and the thermal insulation performance of the material can be significantly improved. However, as the volume fraction further increases, the decreasing trend of the radiative thermal conductivity weakens, and the thermal conductivity due to conduction gradually increases. Therefore, there is an optimal volume fraction to minimize the effective thermal conductivity of silica aerogels.
4. Besides opacifier particles, silica fibers can also inhibit radiative heat transfer at high temperatures and reduce the effective thermal conductivity of silica aerogels. However, increasing the volume fraction of silica fibers will significantly increase the effective thermal conductivity of silica aerogels at low temperatures because its thermal conductivity is higher than that of the solid skeleton. Therefore, on the premise of meeting the mechanical performance requirements, reducing the volume fraction of reinforcing fibers is beneficial to improving the insulation performance.