Abstract:CFRP (Carbon Fiber Reinforced Polymer) is widely used in the aerospace, automobile and construction industries. Its non-homogeneous and anisotropic nature often results in unfavorable hole quality during the drilling process, and exit delamination is a resulting phenomenon that has received much attention. Exit delamination occurs when the drilling thrust force exceeds the critical thrust force. It adversely affects product quality and may even result in rejection. The thrust force on the chisel edge is an important component of the total thrust force, and it helps to predict the total thrust force so that delamination can be reduced or avoided. In this study, noticing that the chisel edge has a certain length, the author puts forward the novel concept of the azimuth angle on the basis of the micro analysis of the contact state between the chisel edge and the carbon fiber. In addition to the orientation angle of the carbon fiber, the azimuth angle of the cutting edge is also an important factor that affects the thrust force. A single carbon fiber may be modeled as a beam on an elastic foundation, and the prediction model of thrust force on the chisel edge is established based on the theory of bending fracture. The model can reflect the influence of the material properties, cutting tool geometry parameters (including the length of chisel edge, rake angle and blunt radius of cutting edge), drilling process parameters, and ultrasonic vibration parameters on the thrust force on the chisel edge and quantitatively explain the reduction of thrust force and improvement of drilling quality during the longitudinal ultrasonic vibration drilling. The prediction model of the thrust force presented in this work can make up for the shortages of qualitative interpretation. The law of periodic variation of the chisel edge thrust force with the azimuth angle helps in developing a deep understanding of the CFRP drilling process and the material removal mechanism. The basis is provided in order to reduce and avoid the exit delamination defects in drilling, and to reasonably and quantitatively determine the spindle speed, feed rate, and drill bit geometry parameters. The reliability of the prediction model is verified by a drilling test.

Digital twin-driven real-time suppression of delamination damage in CFRP drilling

Damage formation and evolution mechanisms in drilling CFRP with prefabricated delamination defects: Simulation and experimentation

A delamination prediction model in ultrasonic vibration assisted drilling of CFRP composites

A novel method for predicting delamination of carbon fiber reinforced plastic (CFRP) based on multi-sensor data

Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression

Simulation and experimental research on longitudinal-torsional ultrasonic vibration drilling of CFRP/Ti laminates

Analytical study of delamination damage and delamination-free drilling method of CFRP composite

Delamination assessment and prediction in ultrasonic-assisted drilling of laminated hybrid composites

A study on the ultrasonic vibration on the cutting performance during ultrasonic-assisted drilling of CFRP with twist and dagger drill bits

Research on prediction method of mechanical properties of open-hole laminated plain woven CFRP composites considering drilling-induced delamination damage

Delamination and thrust force mitigation during drilling of unidirectional CFRP laminate using magnetorheological elastomer

Mechanics of thrust force on chisel edge in carbon fiber reinforced polymer (CFRP) drilling based on bending failure theory

Combined analysis of wear mechanisms and delamination in CFRP drilling

Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach

A novel reverse helical milling process for reducing push-out delamination of CFRP

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

Efficient low-carbon manufacturing for CFRP composite machining based on deep networks

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

Tool life evaluation of CFRP drilling with three kinds of drill

Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP