Abstract:Laser cladding is an advanced surface engineering technology capable of producing Ni-based coatings with high wear resistance. Incorporating graphene (Gr) into Ni-based coatings has great potential for improving the tribological properties of component surface. To date, the effects of Ni-decorated Gr (Ni@Gr) content on the tribological properties of Ni@Gr/Ni-based composite coatings and their surface wear mechanism have yet to be fully understood. In this study, Ni@Gr/Ni-based composite coatings with varying Ni@Gr contents (0, 2, 4, and 6 wt%) were prepared by laser cladding, and the effects of different Ni@Gr contents on the microstructure and tribological properties were investigated in detail. The results showed that the incorporation of Ni@Gr resulted in significant grain refinement and enhanced dislocations, along with an increase in carbide content. The smallest grain size (2.88 μm) and highest hardness (1039.3 HV 0.2 ) were observed in the Ni@Gr/Ni-based composite coating with 4 wt% Ni@Gr. Simultaneously, the coefficient of the friction (COF) and the wear volume of the coating reach the minimum values of 0.3221 and 2.0123×10 -2 mm -3 , representing a 15.44% and 36.29% reduction compared to the pure Ni-based alloy coating, respectively. Based on the observed results, the wear mechanism of Ni@Gr/Ni-based composite coatings was analyzed and revealed. The high wear resistance of the coating is attributed to the optimal mechanical properties resulting from grain refinement and dislocation strengthening, as well as the uniformly distributed Ni@Gr with easily sheared layered structures that generate a lubricating film, effectively reducing the contact area between the coating and the grinding ball while resisting friction loads. This study could provide a deep understanding of the wear mechanism of Gr-doped surface coatings, contributing to the advancement of this field.

Microstructure and properties of graphene reinforced co-based composite coating by laser cladding

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Microstructure and Wear Property of Graphene Nanoplatelets Reinforced Nickel-Based Composite Coating by Laser Cladding

Corrosion resistance and wear behavior of CoCrFeNiMn@Gr high entropy alloy-based composite coatings prepared by laser cladding

Effect of graphene and niobium carbide on microstructure and mechanical properties of Ni60 composite coatings prepared by laser cladding

Tribological properties and wear mechanism of Ni@Gr reinforced Ni-based alloy coatings prepared via laser cladding

Effect of WC–Co addition on tribological and cracking behavior of laser cladded Fe-based amorphous/crystalline composite coatings

Surface microstructures and properties of oxide-reinforced FeCrAl matrix composite coatings prepared by laser cladding on a ferritic-martensitic steel

Microstructure and properties of Co based laser cladded composite coatings

Microstructure and properties of Ni-WC gradient composite coating prepared by laser cladding

Microstructures and Properties of Laser Cladding Al-TiC-CeO₂ Composite Coatings

Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding

Microstructure and friction properties of GNP/Ni-based superalloy composite coating by laser melting deposition

Fabrication of Fe-based amorphous composite coating by laser cladding

Laser Cladding Induced Spherical Graphitic Phases by Super-Assembly of Graphene-Like Microstructures and the Antifriction Behavior

The evolution of multi and hierarchical carbides and their collaborative wear-resisting effects in CoCrNi/WC composite coatings via laser cladding

Microstructure and wear behavior of laser clad interstitial CoCrFeNi high entropy alloy coating reinforced by carbon nanotubes

Research on Laser Cladding Co-Based Alloy on the Surface of Vermicular Graphite Cast Iron

Study on Microstructure and Mechanical Properties of A100-Y2O3 Coatings on Low-Carbon Steel by Laser Cladding

Microstructures and properties of TiN reinforced Co-based composite coatings modified with Y2O3 by laser cladding on Ti–6Al–4V alloy

Preparation and the Mechanical and Tribological Properties of Laser Cladding Coating