Abstract:The electrocatalytic nitrate reduction reaction (NO3‐RR) to ammonia (NH3) offers a promising alternative approach for NH3 production and nitrate‐based voltaic cells which can deliver both electricity and NH3 as products, are also highly attractive. However, nitrate‐to‐NH3 conversion involves a proton‐assisted multiple‐electron transfer process with considerable kinetic barrier, underlying the need for efficient catalysts for the NO3–RR. A Zn‐nitrate battery is reported to enable a “killing three birds with one stone” strategy for energy supply, ammonia production and removal of pollutants with the iron doped nickel phosphide (Fe/Ni2P) as a NO3–RR catalyst electrode. Iron doping induces a downshift of the d‐band center of Ni atoms to the Fermi level, allowing the optimization of Gibbs free energies for reaction intermediates. The Fe/Ni2P catalyst exhibits 94.3% NH3 Faradaic efficiency (FE) and nearly 100% nitrate conversion efficiency at –0.4 V vs. reversible hydrogen electrode (RHE). Further applying this highly efficient NO3–RR electrocatalyst as the cathode material, a novel Zn‐nitrate battery exhibits a power density of 3.25 mW cm–2 and a FE of 85.0% for NH3 production. This work enriches the application of Zn‐based batteries in the field of electrocatalysis and highlights the promise of bimetal phosphide for the NO3–RR. A Zn‐nitrate battery is reported to enable a “killing three birds with one stone” strategy for energy supply, ammonia production, and removal of pollutants with an iron doped nickel phosphide catalyst cathode. This battery system exhibits a power density of 3.25 mW cm−2 and a Faradaic efficiency of 85.0% for nitrate reduction to ammonia.

What problem does this paper attempt to address?

The paper aims to address the following issues: 1. **Problems with the traditional Haber-Bosch process for ammonia synthesis**: Although the traditional Haber-Bosch process is widely used for industrial ammonia production, it is highly energy-intensive and requires harsh conditions. Therefore, researchers have explored the electrocatalytic nitrogen reduction reaction (NRR) as an alternative method. However, this method faces challenges such as low Faradaic efficiency (FE) and low partial current density of ammonia. 2. **Advantages and challenges of the nitrate reduction reaction (NO₃⁻-RR)**: The nitrate reduction reaction is considered an attractive alternative for ammonia production because nitrates have high solubility and lower N-O bond energy. However, this process involves a proton-assisted multi-electron transfer process, which presents significant kinetic barriers and requires efficient catalysts to facilitate the reaction. 3. **Application of iron-doped nickel phosphide (Fe/Ni₂P) catalysts**: Using iron-doped nickel phosphide (Fe/Ni₂P) as a catalyst can significantly enhance the activity and selectivity of the nitrate reduction reaction. Studies have shown that the Fe/Ni₂P catalyst exhibits a high ammonia Faradaic efficiency (FE) of up to 94.3% and nearly 100% nitrate conversion rate at -0.4 V. 4. **Design of zinc-nitrate batteries**: By applying this efficient catalyst to the cathode material and combining it with a zinc anode, a novel zinc-nitrate battery has been developed. This battery not only generates electricity but also synthesizes ammonia from nitrates and removes pollutants from groundwater. The battery demonstrates a power density of 3.25 mW/cm² and an ammonia production FE of 85.0%. In summary, this study proposes a "three birds with one stone" strategy, achieving efficient nitrate reduction reaction through iron-doped nickel phosphide catalysts, and subsequently developing a zinc-nitrate battery system that can generate power, produce ammonia, and remove pollutants.

Efficient Ammonia Electrosynthesis and Energy Conversion through a Zn‐Nitrate Battery by Iron Doping Engineered Nickel Phosphide Catalyst

Enabled Efficient Ammonia Synthesis and Energy Supply in a Zinc–Nitrate Battery System by Separating Nitrate Reduction Process into Two Stages

High-efficiency ammonia electrosynthesis via selective reduction of nitrate on ZnCo2O4 nanosheet array

Mitigating Intraphase Catalytic-Domain Transfer via CO2 Laser for Enhanced Nitrate-to-Ammonia Electroconversion and Zn-Nitrate Battery Behavior

Vacancy enhanced proton preference in bimetallic phosphide catalysts for electrochemical ammonia synthesis and energy supply in Zn-NO 3 − battery

Electrochemical nitrate reduction in acid enables high-efficiency ammonia synthesis and high-voltage pollutes-based fuel cells

Two‐dimensional Cu Plates with Steady Fluid Fields for High‐rate Nitrate Electroreduction to Ammonia and Efficient Zn–Nitrate Batteries

Electrocatalytic nitrate-to-ammonia conversion on CoO/CuO nanoarrays using Zn–nitrate batteries

Synergistic Integration of Amorphous Cobalt Phosphide with a Conductive Channel for Highly Efficient Electrocatalytic Nitrate Reduction to Ammonia

Optimized Intermediates Adsorption Configuration on Co-Doped Fe2P@NiP2 Heterojunction Interface for Enhanced Electrocatalytic Nitrate-To-Ammonia Conversion

Laser-controlled tandem catalytic sites of CuNi alloys with ampere-level electrocatalytic nitrate-to-ammonia reduction activities for Zn–nitrate batteries

Mesostructures Engineering to Promote Selective Nitrate‐to‐Ammonia Electroreduction

Ag‐Co 3 O 4 ‐CoOOH‐Nanowires Tandem Catalyst for Efficient Electrocatalytic Conversion of Nitrate to Ammonia at Low Overpotential via Triple Reactions

Enhanced Nitrate‐to‐Ammonia Activity on Fe/ZnO Nanoparticles via Tuning Intermediate Adsorption in Alkaline Electrolyte

Ambient Ammonia Synthesis via Electrochemical Reduction of Nitrate Enabled by NiCo 2 O 4 Nanowire Array

Highly active electroreduction of nitrates to ammonia over a zeolitic imidazolium framework-derived Fe single-atom catalyst with sulfur-modified asymmetric active centers

Improved Nitrate-to-Ammonia Electrocatalysis through Hydrogen Poisoning Effects

Au nanoclusters anchored on TiO2 nanosheets for high-efficiency electroreduction of nitrate to ammonia

A High Power Density Zn‐Nitrate Electrochemical Cell Based on Theoretically Screened Catalysts

Highly selective electrochemical reduction of nitrate-to-ammonia using iron phosphide self-supported electrode

Coupling denitrification and ammonia synthesis via selective electrochemical reduction of nitric oxide over Fe 2 O 3 nanorods